Arvind Pattamatta

Dr. Arvind Pattamatta


Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 November 2018 in Physical Review E
Verified
Journal Article
Closed access
PDF file
TJTejaswi Josyula
Tejaswi Josyula
ZWZhenying Wang
Zhenying Wang
AAAlexandros Askounis
Alexandros Askounis
DODaniel Orejon
Daniel Orejon
SHSivasankaran Harish
Sivasankaran Harish
APArvind Pattamatta
Arvind Pattamatta
We report a systematic study of the role of Marangoni convection in the evaporation kinetics of pure water drops, considering the influence of the heating regime and surface wettability. Marangoni flows were induced via heating under constant wall temperature (uniform heating) and constant heat flux (local heating) regimes below the drops. To visualize the thermal patterns emerging during the evaporation, we employed infrared thermography and we captured the evolution of the drop profile with a CCD camera to follow the evaporation kinetics of each drop. We observed a strong correlation between the temperature difference within the drop and the evolution of the drop shape during different modes of evaporation (i.e., constant radius, angle, or stick-slip) resulting in different Marangoni flow patterns. Under uniform heating, stable recirculatory vortices due to Marangoni convection emerged at high temperature, but they faded at later stages of the evaporation process. On the other hand, in the localized heating case, the constant heat flux resulted in a rapid increase in the temperature difference within the drop capable of sustaining Marangoni flows throughout the evaporation. Surface wettability was found also to play a role in both the emergence of the Marangoni flows and the evaporation kinetics. In particular, recirculatory flows in drops on hydrophobic surfaces were stronger when compared to flows on hydrophilic surfaces for both uniform and local heating. To quantify the effect of the heating mode and the importance of Marangoni flows, we calculated the evaporative flux for each case and found it to be much higher in the localized heating case. Evaporative flux depends on both diffusion and natural convection of the vapor phase to the ambient. Hence, we estimated the Grashof number for each case and found a strong relation between natural convection in the vapor phase and heating regime or Marangoni convection in the liquid phase. Subsequently, we demonstrate the limitation of the previously reported diffusion-only model in describing the evaporation of heated drops.

26 July 2011 in Discover Nano
Verified
Journal Article
Open access
PDF file
SSS Savithiri
S Savithiri
APArvind Pattamatta
Arvind Pattamatta
SDSarit K Das
Sarit K Das
The primary objective of this study is to investigate the effect of slip mechanisms in nanofluids through scaling analysis. The role of nanoparticle slip mechanisms in both water- and ethylene glycol-based nanofluids is analyzed by considering shape, size, concentration, and temperature of the nanoparticles. From the scaling analysis, it is found that all of the slip mechanisms are dominant in particles of cylindrical shape as compared to that of spherical and sheet particles. The magnitudes of slip mechanisms are found to be higher for particles of size between 10 and 80 nm. The Brownian force is found to dominate in smaller particles below 10 nm and also at smaller volume fraction. However, the drag force is found to dominate in smaller particles below 10 nm and at higher volume fraction. The effect of thermophoresis and Magnus forces is found to increase with the particle size and concentration. In terms of time scales, the Brownian and gravity forces act considerably over a longer duration than the other forces. For copper-water-based nanofluid, the effective contribution of slip mechanisms leads to a heat transfer augmentation which is approximately 36% over that of the base fluid. The drag and gravity forces tend to reduce the Nusselt number of the nanofluid while the other forces tend to enhance it.

17 January 2019 in Heat Transfer Engineering
Verified
Journal Article
Closed access
AAA. R. Akash
A. R. Akash
SASatyanand Abraham
Satyanand Abraham
APArvind Pattamatta
Arvind Pattamatta
SDSarit K. Das
Sarit K. Das
The overall heat transfer of a cross flow heat exchanger can be enhanced by using the nanofluids as coolant, which finds application in reducing the size and weight of automobile radiator. However, improving the heat transfer using nanofluids can be accompanied by simultaneous variations in the required pumping power. This study experimentally evaluates the thermo-hydraulic performance of three nanofluids—metallic (copper, aluminum) and nonmetallic (multiwalled carbon nanotube (MWCNT))—as coolant for an automobile radiator by utilizing an in-house test rig. An enhancement in overall heat transfer coefficient can be observed with nanocoolants (nanofluid as coolant), compared to the de-ionized water at the same Reynolds number. The maximum enhancement in the overall heat transfer coefficient was observed to be 40, 29, and 25% for MWCNT, copper, and aluminum nanofluids, respectively. The thermal performance of coolants was also compared with the same pumping power criterion. The overall heat transfer coefficient of nanofluids were higher than basefluid at low pumping power range and the trend changes with increase in the pumping power. The present study shows that the heat transfer characteristics at the same Reynolds number as well as at the same pumping power needs to be considered for the selection of appropriate nanocoolant for automobile radiator application.

1 March 2022 in Applied Thermal Engineering
Verified
Journal Article
Closed access
PDPraveen Dhanalakota
Praveen Dhanalakota
SASatyanand Abraham
Satyanand Abraham
PMPallab Mahapatra
Pallab Mahapatra
BSBahgat Sammakia
Bahgat Sammakia
APArvind Pattamatta
Arvind Pattamatta

25 August 2014 in Numerical Heat Transfer, Part B: Fundamentals
Verified
Journal Article
Closed access
ACAnkur Chattopadhyay
Ankur Chattopadhyay
APArvind Pattamatta
Arvind Pattamatta
The subcontinuum energy transport mechanism in solids can be explained by the Lattice Boltzmann Method (LBM), a discrete representation of the Boltzmann Transport Equation (BTE). The present study focuses on a detailed comparison of the LBM and BTE. Results reveal that at continuum scale, the LBM follows the BTE almost precisely. However, as the device dimensions are reduced, approaching the ballistic limit, the LBM deviates from the BTE results in terms of thermal property estimation. The inherent nonisotropic lattice configuration has a dominant contribution to the performance of the LBM. A threshold length scale is also proposed for successful implementation of the LBM solver.

5 January 2017 in Numerical Heat Transfer, Part A: Applications
Verified
Journal Article
Closed access
SSS. Savithiri
S. Savithiri
APArvind Pattamatta
Arvind Pattamatta
SDSarit K. Das
Sarit K. Das
Rayleigh–Benard (R-B) convection in water-based alumina (Al2O3) nanofluid is analyzed based on a single-component non-homogeneous volume fraction model (SCNHM) using the lattice Boltzmann method (LBM). The present model accounts for the slip mechanisms such as Brownian and thermophoresis between the nanoparticle and the base fluid. The average Nusselt number at the bottom wall for pure water is compared to the previous numerical data for natural convection in a cavity and a good agreement is obtained. The parameters considered in this study include the Rayleigh number of the nanofluid, the volume fraction of alumina nanoparticle and the aspect ratio of the cavity. For the Al2O3/water nanofluid, it is found that heat transfer rate decreases with an increase of the volume fraction of the nanoparticle. The results are demonstrated and explained with average Nusselt number, isotherms, streamlines, heat lines, and nanoparticle distribution. The effect of nanoparticles on the onset of instability in R-B convection is also analyzed.