This work deals with a general energetic approach to establish an accurate electromechanical model of a piezoelectric transformer (PT). Hamilton's principle is used to obtain the equations of motion for free vibrations. The modal characteristics (mass, stiffness, primary and secondary electromechanical conversion factors) are also deduced. Then, to illustrate this general electromechanical method, the variational principle is applied to both homogeneous and nonhomogeneous Rosen-type PT models. A comparison of modal parameters, mechanical displacements, and electrical potentials are presented for both models. Finally, the validity of the electrodynamical model of nonhomogeneous Rosen-type PT is confirmed by a numerical comparison based on a finite elements method and an experimental identification.
23 July 2007 in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
This paper deals with a deterministic and rational way to design piezoelectric transformers in radial mode. The proposed approach is based on the study of the inverse problem of design and on its reformulation as a mixed constrained global optimization problem. The methodology relies on the association of the analytical models for describing the corresponding optimization problem and on an exact global optimization software, named IBBA and developed by the second author to solve it. Numerical experiments are presented and compared in order to validate the proposed approach.
22 April 2020 in IEEE Transactions on Plasma Science
This article deals with the proof of concept and the preliminary evaluation of decontamination performances obtained with a plasma jet generated by a piezoelectric transformer (PT). This low-voltage supply solution (<; 10 V) is investigated as a plasma jet device, compact and safe solution for the decontamination of medical thermo-sensitive devices. The principle of the piezoelectric generator is presented, followed by the optical s-protocol conditions for the bactericidal effect observations, and finally the reduction rates obtained on Pseudomonas aeruginosa and Staphylococcus aureus bacteria strains with an argon plasma jet at atmospheric pressure about 2.5-W electrical input power.
1 December 2011 in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
This paper is about the modeling of piezoelectric transformer in nonlinear behavior conditions. In the frame of applications with high output loads, nonlinear behavior be comes non-negligible. First, the origins of nonlinearities and theoretical approaches are preliminarily discussed. Then, the model is developed for a typical Rosen-type transformer and experimental investigations are presented. The results are used to confirm the validity of the analytical model and the methodology to express the terms added to the typical constitutive piezoelectric relations.
14 April 2015 in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
This paper deals with the analytical modeling of a ring Rosen-type piezoelectric transformer. The developed model is based on a Hamiltonian approach, enabling to obtain main parameters and performance evaluation for the first radial vibratory modes. Methodology is detailed, and final results, both the input admittance and the electric potential distribution on the surface of the secondary part, are compared with numerical and experimental ones for discussion and validation.