Tianzhong Zhao

Dr. Tianzhong Zhao


Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 May 2013 in SpringerPlus
Verified
Journal Article
Open access
PDF file
YSYajun Song
Yajun Song
TZTianzhong Zhao
Tianzhong Zhao
Bibliometric is increasingly used for the analysis of discipline dynamics and management related decision-making. This study analyzes 937,923 keywords from 78,986 articles concerning forest ecology and conducts a serial analysis of these articles’ characteristics. The articles’ records, published between 2002 and 2011, were downloaded from the Web of Science, and their keywords were exported by Java processing programs. The result shows that forest ecology studies focused on forest diversity, conservation, dynamics and vegetation in the last decade. Developed countries, such as the USA, Canada, and Germany, were the most productive countries in the field of forest ecology research. From 2002 to 2011, the number of articles published annually related to forest ecology grew at a stable rate, as indicated by the fit produced by a high determination coefficient (R2 = 0.9955). The findings of this study may be applicable for planning and managing forest ecology research and partners involved in such research may use this study as a reference.

4 January 2022 in Remote Sensing
Verified
Journal Article
Open access
PDF file
BLBin Li
Bin Li
GFGuangpeng Fan
Guangpeng Fan
TZTianzhong Zhao
Tianzhong Zhao
ZDZhuo Deng
Zhuo Deng
YYYonghui Yu
Yonghui Yu
The new generation of satellite-borne laser radar Ice, Cloud, and land Elevation Satellite-2 (ICESat-2) data has been successfully used for ground information acquisition. However, when dealing with complex terrain and dense vegetation cover, the accuracy of the extracted understory Digital Terrain Model (DTM) is limited. Therefore, this paper proposes a photon correction data processing method based on ICESat-2 to improve the DTM inversion accuracy in complex terrain and high forest coverage areas. The correction value is first extracted based on the ALOS PALSAR DEM reference data to correct the cross-track photon data of ICESat-2. The slope filter threshold is then selected from the reference data, and the extracted possible ground photons are slope filtered to obtain accurate ground photons. Finally, the impacts of cross-track photon and slope filtering on fine ground extraction from the ICESat-2 data are discussed. The results show that the proposed photon correction and slope filtering algorithms help to improve the extraction accuracy of forest DTM in complex terrain areas. Compared with the forest DTM extracted without the photon correction and slope filtering methods, the MAE (Mean Absolute Error) and RMSE (Root Mean Square Error) are reduced by 51.90~57.82% and 49.37~53.55%, respectively. To the best of our knowledge, this is the first study demonstrating that photon correction can improve the terrain inversion ability of ICESat-2, while providing a novel method for ground extraction based on ICESat-2 data. It provides a theoretical basis for the accurate inversion of canopy parameters for ICESat-2.

7 September 2022 in Remote Sensing
Verified
Journal Article
Open access
PDF file
BLBin Li
Bin Li
TZTianzhong Zhao
Tianzhong Zhao
Xiaohui SuXiaohui Su
Xiaohui Su
GFGuangpeng Fan
Guangpeng Fan
WZwenjie zhang
wenjie zhang
YYYonghui Yu
Yonghui Yu
The Ice, Cloud, and Land Elevation Satellite–2 (ICESat–2) carries the Advanced Topographic Laser Altimeter System (ATLAS), enabling global canopy height measurements from forest canopy height models (CHMs). Topographic slope is a crucial factor affecting the accuracy of canopy height estimates from ICESat–2 CHMs, but it has not been sufficiently studied. This paper aims to eliminate the influence of slope on canopy height estimates from ICESat–2 data and establishes a method for correcting forest canopy heights based on high spatial resolution digital orthophoto maps (DOM). The cross-track photons are corrected horizontally to eliminate the estimation error. Multi-resolution segmentation is used to segment tree crowns in the DOM, and the distance and relative position between the top of canopy (TOC) photons and the center point of the crown are calculated. TOC photon correction rules are established for different terrains, and the vertical error of the TOC photons is corrected. The results indicate that the vertical error increases exponentially with the slope. The cross-track photon correction and the TOC photon correction method eliminate the effect of slope on canopy height estimates. The cross-track photon correction method reduces the mean absolute error (MAE) and root mean square error (RMSE) of the canopy height estimates by 35.71% and 35.98%, respectively. The TOC photon correction approach further reduces the MAE and RMSE by 23% and 19.23%, respectively. The proposed method has significantly higher accuracy for forest canopy height estimation using ICESat–2 data than the traditional method.

10 April 2021 in Forests
Verified
Journal Article
Open access
PDF file
WZwenjie zhang
wenjie zhang
TZTianzhong Zhao
Tianzhong Zhao
Xiaohui SuXiaohui Su
Xiaohui Su
BWBaoguo Wu
Baoguo Wu
志强 分钟志强 分钟
志强 分钟
YTyingze tian
yingze tian
Stem analysis is an essential aspect in forestry investigation and forest management, as it is a primary method to study the growth law of trees. Stem analysis requires measuring the width and number of tree rings to ensure the accurate measurement, expand applicable tree species, and reduce operation cost. This study explores the use of Open Source Computer Vision Library (Open CV) to measure the ring radius of analytic wood disk digital images, and establish a regression equation of ring radius based on image geometric distortion correction. Here, a digital camera was used to photograph the stem disks’ tree rings to obtain digital images. The images were preprocessed with Open CV to measure the disk’s annual ring radius. The error correction model based on the least-square polynomial fitting method was established for digital image geometric distortion correction. Finally, a regression equation for tree ring radius based on the error correction model was established. Through the above steps, click the intersection point between the radius line and each ring to get the pixel distance from the ring to the pith, then the size of ring radius can be calculated by the regression equation of ring radius. The study’s method was used to measure the digital image of the Chinese fir stem disk and compare it with the actual value. The results showed that the maximum error of this method was 0.15 cm, the average error was 0.04 cm, and the average detection accuracy reached 99.34%, which met the requirements for measuring the tree ring radius by stem disk analysis. This method is simple, accurate, and suitable for coniferous and broad-leaved species, which allows researchers to analyze tree ring radius measurement, and is of great significance for analyzing the tree growth process.

18 September 2024 in Remote Sensing
Verified
Journal Article
Open access
PDF file
LYLI YUANLING
LI YUANLING
SZShengyuan Zou
Shengyuan Zou
TZTianzhong Zhao
Tianzhong Zhao
Xiaohui SuXiaohui Su
Xiaohui Su
Building change detection (BCD) from remote sensing images is an essential field for urban studies. In this well-developed field, Convolutional Neural Networks (CNNs) and Transformer have been leveraged to empower BCD models in handling multi-scale information. However, it is still challenging to accurately detect subtle changes using current models, which has been the main bottleneck to improving detection accuracy. In this paper, a multi-scale differential feature self-attention network (MDFA-Net) is proposed to effectively integrate CNN and Transformer by balancing the global receptive field from the self-attention mechanism and the local receptive field from convolutions. In MDFA-Net, two innovative modules were designed. Particularly, a hierarchical multi-scale dilated convolution (HMDConv) module was proposed to extract local features with hybrid dilation convolutions, which can ameliorate the effect of CNN’s local bias. In addition, a differential feature self-attention (DFA) module was developed to implement the self-attention mechanism at multi-scale difference feature maps to overcome the problem that local details may be lost in the global receptive field in Transformer. The proposed MDFA-Net achieves state-of-the-art accuracy performance in comparison with related works, e.g., USSFC-Net, in three open datasets: WHU-CD, CDD-CD, and LEVIR-CD. Based on the experimental results, MDFA-Net significantly exceeds other models in F1 score, IoU, and overall accuracy; the F1 score is 93.81%, 95.52%, and 91.21% in WHU-CD, CDD-CD, and LEVIR-CD datasets, respectively. Furthermore, MDFA-Net achieved first or second place in precision and recall in the test in all three datasets, which indicates its better balance in precision and recall than other models. We also found that subtle changes, i.e., small-sized building changes and irregular boundary changes, are better detected thanks to the introduction of HMDConv and DFA. To this end, with its better ability to leverage multi-scale differential information than traditional methods, MDFA-Net provides a novel and effective avenue to integrate CNN and Transformer in BCD. Further studies could focus on improving the model’s insensitivity to hyper-parameters and the model’s generalizability in practical applications.

21 June 2012 in Chinese Science Bulletin
Verified
Journal Article
Open access
PDF file
JSJingJing Shi
JingJing Shi
TZTianzhong Zhao
Tianzhong Zhao
YLYuanCai Lei
YuanCai Lei
To evaluate the efficiencies of different sampling methods for a rare and clustered population, we investigated the sampling effects for the two species Tamarix chinensis (Salt cedar) and Elaeagnus angustifolia (Russian olive) in western Inner Mongolia with two-stage sequential sampling, which is a new sampling method, traditional simple random sampling and two-stage sampling. Based on two-stage sequential sampling and two-stage sampling, each population was partitioned into four primary sampling units, and then two of them were randomly selected. Sampling designs were simulated based on the conditions of five secondary sampling unit areas, two criterion values, five initial secondary sampling units and two sequential secondary sampling units in 1000 repetitions. To evaluate the performance of the sampling designs for each method, the variance and relative error of the density estimates were used. The relative sampling efficiencies of the three sampling methods were compared using the same final sampling sizes. We analyzed the sampling efficiency generated by two-stage sequential sampling and found that it yielded smaller variances than those of simple random sampling and two-stage sampling in all sampling designs, and that two-stage sampling was more efficient than simple random sampling. Density estimates from the two-stage sequential sampling were very close to the true values. We also determined the optimum secondary sampling unit areas for the two species in the two-stage sequential sampling. It was best for Tamarix chinensis and Elaeagnus angustifolia when the secondary sampling unit areas were 200 and 100 m2, respectively.