Yeşim Tarhan

Dr. Yeşim Tarhan

Ardahan University, Ardahan, Turkey (Türkiye)
orcid
Assisstant Professor in Ardahan University

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 May 2021 in Materials
Verified
Journal Article
Open access
PDF file
YTYeşim Tarhan
Yeşim Tarhan
Remzi ŞahinRemzi Şahin
Remzi Şahin
The effect of air-entraining admixture (AEA) on the fresh and rheological behavior of mortars designed to be used in 3D printers was investigated. Blast furnace slag, calcined kaolin clay, polypropylene fiber, and various chemical additives were used in the mortar mixtures produced with Super White Cement (CEM I 52.5 R) and quartz sand. In addition to unit weight, air content, and compressive strength tests, in order to determine the stability of 3D printable mortar elements created by extruding layer by layer without any deformation, extrudability, buildability, and open time tests were applied. Fresh and rheological properties of 3D printable mortars were also determined. It was concluded that the addition of AEA to the mortars decreased the unit weight, viscosity, yield, and compressive strength, but increased the air content, spread diameter, initial setting time, and thixotropy of 3D printable mortar. It is recommended to develop a unique chemical admixture for 3D printable mortars, considering the active ingredients of the chemical additives that affect fresh and rheological performance of mortar such as superplasticizer, viscosity modifying, and cement hydration control.

29 December 2024 in Buildings
Verified
Journal Article
Open access
PDF file
YTYeşim Tarhan
Yeşim Tarhan
İTİSMAİL HAKKI TARHAN
İSMAİL HAKKI TARHAN
Remzi ŞahinRemzi Şahin
Remzi Şahin
Three-dimensional printing technology is transforming the construction industry, which is increasingly turning to advanced materials and techniques to meet environmental and economic challenges. This comprehensive literature review evaluated various binder materials, including cement, geopolymers, earthen materials, supplementary cementitious materials, polymers, and biopolymers, with a focus on their environmental impacts and rheological properties. The study revealed an increasing interest in cementitious binders, which deliver essential structural strength and exhibit a wide range of yield stress values (15 to 6500 Pa), influenced by binder type and supplementary materials such as nanoclay. However, the significant CO2 emissions associated with cement pose major sustainability challenges. As a sustainable alternative, geopolymers demonstrate lower yield stress values (800 to 3000 Pa) while ensuring adequate buildability for vertical printing and reducing environmental impact. These findings underscore the need to adopt sustainable binder matrices to align 3D printing construction practices with global sustainability goals.

9 December 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
YTYeşim Tarhan
Yeşim Tarhan
NKNuriye Kabakus
Nuriye Kabakus
The materials traditionally used in the construction of flexible and rigid pavements in modern road infrastructure present challenges in achieving sustainable development goals. Advances in technology have introduced the use of different pavement material mixes, leading to the introduction of earth-based alternatives. These materials are environmentally friendly, cost-effective, recyclable, and offer excellent insulation properties. Stabilization of earth-based materials improves their mechanical properties, reducing road construction costs and increasing durability. The present study investigates the mechanical and durability properties of earth-based materials stabilized with various additives, including cement, lime, polymer, and biopolymer, over 28 and 56 days. Fresh properties are assessed using unit volume weight, flow table, air content, and fall cone tests, while hardened properties are assessed using flexural strength, compressive strength, and water absorption. Microstructural analysis is carried out using scanning electron microscopy (SEM) and X-ray diffraction (XRD). The cement-stabilized samples show improved strength and durability, with the 5% cement group showing a 67% increase in compressive strength over the control group and the 10% cement group showing over 200% higher compressive strength. These results suggest that stabilized earth-based materials could provide a cost-effective and sustainable alternative to conventional pavements for low-traffic roads.

1 January 2024 in Journal of Materials in Civil Engineering
Verified
Journal Article
Closed access
YTYeşim Tarhan
Yeşim Tarhan
Remzi ŞahinRemzi Şahin
Remzi Şahin

15 June 2023
Verified
Book Chapter
Closed access
PDF file
YTYeşim Tarhan
Yeşim Tarhan
FCFlavio Craveiro
Flavio Craveiro
HBHelena Bartolo
Helena Bartolo

11 August 2023 in Materials Today: Proceedings
Verified
Journal Article
Closed access
YTYeşim Tarhan
Yeşim Tarhan
APArnaud Perrot
Arnaud Perrot