Freeze-thaw cycles caused by seasonal temperature fluctuations significantly affect the geotechnical engineering properties. This study investigated the crucial role of water distribution patterns in the characterization of elastic wave properties for the fine F-110 sand during a freeze-thaw cycle. Sand specimens with four different water distribution patterns were prepared, namely homogeneously-mixed, evaporation-driven, vertically-, and horizontally-layered specimens. The P- and S-wave signatures of the specimens were monitored using piezo crystal sensors. Results indicated the criticality of water distribution patterns in the determination of small-strain soil properties even though the specimens had identical global water saturation. The nuclear magnetic resonance-based water volume depth profiles indicated that the evaporation-driven specimens had more heterogeneous pore-invasive ice-bonding layers at a high water saturation region; by contrast, the drying process facilitated uniform meniscuses around the particle contacts near the air percolation threshold. Elastic wave measurements for laboratory-prepared specimens might over/underestimate the small-strain soil stiffness of sediments in nature, wherein the drying processes prevailed to control the water saturation. This study highlighted a clear transition from capillary-controlled to cementation-controlled elastic wave properties during temperature oscillations.

The major and minor components in granular soil materials determine their properties and behavior. This study explores the transitional behavior within threshold fines fraction of soil mixtures based on the data from the literature and experiments. From the literature survey, the void ratio, shear wave velocity, compression index, and friction angle capture the transitional turning point between the low and data-adjusted high threshold fines fractions. In particular, there is a dramatic change in hydraulic conductivity below the low threshold fines fraction that highlights the critical role of small amounts of fines in the fluid flow (e.g., clogging). From an experimental study, the engineering properties of natural soil samples identified using deformation and elastic wave sensors show transitional trends within the Revised Soil Classification System framework. The evolution of compressibility and shear wave velocity indicate that either coarse, fine, or both particles are likely to contribute to large and small strain stiffnesses when the effective stress is below 400 kPa. Thereafter, both engineering properties indicate that the soil sample retains a memory of in-situ overburden pressure when the effective stress is around 400 kPa. There is a critical role of fines that are slightly higher than low threshold fines fraction on engineering properties that promote the application of Revised Soil Classification System RSCS to natural soils.