Ioannis Vaskalis

Mr. Ioannis Vaskalis


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 November 2019 in Sustainability
Verified
Journal Article
Open access
PDF file
IVIoannis Vaskalis
Ioannis Vaskalis
Vasiliki (Vicky) SkoulouVasiliki (Vicky) Skoulou
Vasiliki (Vicky) Skoulou
GSG. Stavropoulos
G. Stavropoulos
ANASTASIA ZABANIOTOUANASTASIA ZABANIOTOU
ANASTASIA ZABANIOTOU
A techno-economic assessment of two circular economy scenarios related to fluidized bed gasification-based systems for combined heat and power (CHP) generation, fueled with rice processing wastes, was conducted. In the first scenario, a gasification unit with 42,700 t/y rice husks capacity provided a waste management industrial symbiosis solution for five small rice-processing companies (SMEs), located at the same area. In the second scenario, a unit of 18,300 t/y rice husks capacity provided a waste management solution to only one rice processing company at the place of waste generation, as a custom-made solution. The first scenario of a cooperative industrial symbiosis approach is the most economically viable, with an annual revenue of 168 €/(t×y) of treated rice husks, a very good payout time (POT = 1.05), and return in investment (ROI = 0.72). The techno-economic assessment was based on experiments performed at a laboratory-scale gasification rig, and on technological configurations of the SMARt-CHP system, a decentralized bioenergy generation system developed at Aristotle University, Greece. The experimental proof of concept of rice husks gasification was studied at a temperature range of 700 to 900 °C, under an under-stoichiometric ratio of O2/N2 (10/90 v/v) as the gasification agent. Producer gas’s Lower Heating Value (LHV) maximized at 800 °C (10.9 MJ/Nm3), while the char’s Brunauer Emmet Teller (BET) surface reached a max of 146 m2/g at 900 °C. Recommendations were provided for a pretreatment of rice husks in order to minimize de-fluidization problems of the gasification system due to Si-rich ash. With the application of this model, simultaneous utilization and processing of waste flows from various rice value chain can be achieved towards improving environmental performance of the companies and producing energy and fertilizer by using waste as a fuel and resource with value.

4 January 2023 in Energies
Verified
Journal Article
Open access
PDF file
ANASTASIA ZABANIOTOUANASTASIA ZABANIOTOU
ANASTASIA ZABANIOTOU
IVIoannis Vaskalis
Ioannis Vaskalis
Plastic waste has a high energy content and can be utilized as an energy source. This study aims to assess the economic feasibility of polypropylene plastic waste (PP) pyrolysis. A literature review was carried out to determine the optimal pyrolysis conditions for oil production. The preferred pyrolysis temperature ranges from 450 °C to 550 °C, where the oil yields vary from 82 wt.% to 92.3 wt.%. Two scenarios were studied. In the first scenario, pyrolysis gas is used for the pyrolysis heating needs, whereas in the second scenario, natural gas is used. An overview of the economic performance of a pyrolysis plant with a capacity of 200,000 t/year is presented. Based on the results, the plant is economically viable, as it presents high profits and a short payback time for both scenarios considered. Although the annual revenues are smaller in scenario 1, the significant reduction in operating costs makes this scenario preferable. The annual profits amount to 37.3 M€, while the return on investment is 81% and the payback time is 1.16 years. In scenario 2, although the plant is still feasible and shows high profitability, the annual profits are lower by about 1.5 M€, while the payback time is 1.2 years.

2 January 2024 in Biomass
Verified
Journal Article
Open access
PDF file
IVIoannis Vaskalis
Ioannis Vaskalis
ANASTASIA ZABANIOTOUANASTASIA ZABANIOTOU
ANASTASIA ZABANIOTOU
In a circular economy, significant emphasis is given to the energetic valorization of agricultural byproducts. Cotton stalks are suitable as a feedstock for the production of bioenergy due to their high energy content. This study’s main focal areas are the economic viability and environmental implications of a system that can gasify or pyrolyze 25,500 tons of cotton stalk annually. To learn more about how gasification and pyrolysis affect the environment, a life cycle assessment (LCA) was conducted. This analysis evaluates the whole value chain and covers all stages of the cotton supply chain from cradle to gate, including production, harvest, transportation, and utilization. According to the findings, both systems exhibit economic viability, generating sizable profits and having quick payback times. However, despite its larger initial expenditure of EUR 2.74 million, the pyrolysis unit ends up being the better option because it has a payback period of 1.58 years, a return on investment (ROI) of 58% and a net present value (NPV) of EUR 21.5 million. Gasification is still an economically attractive alternative with a lower initial investment (EUR 1.81 million), despite having a lower ROI (36%) and NPV (EUR 10.52 million), as well as a longer payback period (2.41 years). However, the environmental implications of the gasification option are generally higher than those of pyrolysis. The impacts of gasification on fossil depletion (FDP) were estimated to be 5.7 million kg oil eq., compared to 5.3 million kg oil eq. for pyrolysis. Similarly, gasification resulted in 41.55 million kg U235 eq. and pyrolysis in 41.5 million kg U235 eq. related to impacts on ionizing radiation (IRP_HE). Other impact categories that emerge as the most important are freshwater eutrophication (FEP) and marine eutrophication (MEP).