The objective of this study is to investigate the effects of different nanoparticles as reinforcement in a polymeric matrix on the mechanical and tribological properties of the composite. The different particles including nanoclay (NC), nano-graphene oxide (NGO), and carbon nanotubes (CNT) with various weight percentages were incorporated into the epoxy matrix. Young’s modulus, ultimate tensile strength, strain at the fracture point, and the fracture toughness of nanocomposite samples were investigated. Besides, the tribological performance of these fabricated nanocomposites was evaluated and discussed. The results show that a significant change in the mechanical properties of the nanocomposites compared to the epoxy matrix. Also, the results reveal that the combination of NC with NGO improves the mechanical properties of graphene nanocomposites. It is found that adding NC to the NG/epoxy composite, may increase the fracture toughness up to 2 times as well as improve the ultimate tensile strength and strain at the fracture point. However, there was no significant change in Young’s modulus.
1 May 2010 in Proceedings of the Institution of Civil Engineers - Ground Improvement
Forging hammers produce powerful short-period impact loads. A mounting system or a properly designed foundation could be used to transmit the shock to the soil and lessen its effects on the surroundings. The supporting foundations must be designed to reduce the vibration amplitude and the forces transmitted to the soil medium in order to meet serviceability and stability requirements. Soil reinforcement may be used to improve the performance of the foundations supporting shock-producing equipment. This paper investigates the effect of soil reinforcement on the performance characteristics for different configurations of shock-absorbing foundations. The results demonstrated the efficiency of soil reinforcement in improving the performance of foundations subjected to impact load. A parametric study was conducted and a set of charts was established as practical guidance for the design of soil reinforcement schemes.