Single crystals of the Sr1 − xLuxF2 + x nonstoichiometric phase (x = 0.095 and 0.189), which crystallizes in the CaF2 structure type (space group Fm $\bar 3$ m), are studied by X-ray diffraction. A procedure for the cluster modeling of Sr1 − xLuxF2 + x based on the fine structural features of the Sr4Lu3F17 stoichiometric compound with a fluorite derivative structure (one of the ordered phases in the SrF2-LuF3 system) is proposed. The description of the structure of the Sr1−xLuxF2+x solid solutions is based on the octacubic configuration of the {M14 − nRnF64 + n} defect cluster. Structural data on the displacements of cations and anions in the ordered Sr4Lu3F17 phase (in relation to the undistorted fluorite phase) allow one to identify the distortions of the crystal lattice of the disordered (nonstoichiometric) Sr1− xLuxF2 + x phase.
A Sr0.7Ce0.3F2.3 crystal (CaF2 type, sp. gr. \(Fm\bar 3m\) ), obtained by quenching from melt, has been studied for the first time by X-ray diffraction. Fluorine vacancies and interstitial anions are found in the 8c and 32f sites, respectively. The defect ratio in the Sr0.7Ce0.3F2.3 structure corresponds to the tetrahedral cluster configuration of defects {Sr4 − nCenF26}. The defect structure of quenched (at a rate of ∼25 K/min) crystal differs from that of a crystal grown from melt (cooling at a rate of ∼3 K/min) by the displacement of some cations (presumably Ce3+) along the threefold axis to the 32f site and the anisotropy of thermal vibrations of ions in the cluster core (Fint(32f)3). The concentration dependence of the lattice parameters of quenched Sr1 − xCexF2 + x phases (x = 0–0.5) is described by a third-order polynomial: a = 5.80009 + 1.166518 × 10−3x − 1.124969 × 10−5x2 + 8.258155 × 10−8x3. The compositional dependence of microdistortions is also nonlinear; maximum microdistortions are observed in the SrF2 crystal. They decrease with an increase in the cerium concentration x to ∼ 0.35. The minimum in the range x = 0.30–0.35 correlates with a composition corresponding to the peak (at x ∼ 0.29) in the melting curves of the fluorite phase estimated from the phase diagram of the SrF2-CeF3 system (the method of thermal analysis).
The defect structure of as-grown SrF2 and nonstoichiometric phases Sr1 – xLa xF2 + x ( x= 0.11, 0.20, 0.32, 0.37, 0.47) single crystals, grown from a melt under identical conditions, has...
The defect structure of Ba0.69La0.31F2.31 single crystals in as-grown state and after annealing at 1173 K for 336 h was studied by X-ray diffraction analysis. Both crystals belong to the CaF2 structure type (sp. gr. ). They have vacancies in the main anion motif and interstitial fluorine anions in Wyckoff positions 48i and 4b. Relaxation (static displacement of some main anions to Wyckoff position 32f) is observed in the annealed crystal. It was established that annealing leads to a change in the type of displacement of the main anions in Wyckoff positions 8c from dynamic to static. Displacement of La3+ cations to Wyckoff position 32f is observed in both crystals. A model of the defect structure of Ba0.69La0.31F2.31 is proposed, according to which interstitial fluorine anions and La3+ cations are aggregated into [Ba14−nLanF64+n] clusters with the cuboctahedral anionic core formed by interstitial fluorine anions in Wyckoff positions 48i. Ba2+ cations are located in the cluster in the centers of the faces, and the La3+ cations are shifted by 0.24 Å from the vertices of the cluster along the three-fold axis towards the center of the cluster. The study establishes the relationship between the defect structure of crystals and their structurally sensitive properties, and to develop approaches to their management.
The products of spontaneous crystallization (at a cooling rate of ∼200 K/min) of Sr1 − xRxF2 + x melts in the homogeneity range of the fluorite phase have been investigated. Thirty-two irrational compositions with 23.8–36.1 mol % RF3 and eight rational Sr2RF7 compositions are obtained. With respect to the RF3 content, these compositions form five groups: (1) Sr0.762R0.238F2.238 (23.8% RF3), (2) Sr0.744R0.256F2.256 (25.6%), (3) Sr0.718R0.282F2.282 (28.2%), (4) Sr2RF7 (33.3%), and (5) Sr0.639R0.361F2.361 (36.1%). R = Tb-Lu, Y for all groups. Quenching melts of group 5 with R = Tb, Dy, and Ho leads to the formation of ordered phases with the trigonal distortion of the rhβ-Na7Zr6F31 type, while for melts of group 5 with R = Lu, quenching yields a phase of the trigonal rhα′-Sr4Lu3F17 type. In group 5 with R = Y, Er, Tm, or Yb and in groups 1–4 with all REEs, fluorite phases are formed. Annealing at 900 ± 20°C for 96 h with subsequent cooling at a rate of ∼200 K/min expands the variety of ordered phases: a phase with a new r type of orthorhombic distortion is formed in group 1 with R = Lu, in group 2 with R = Tm or Lu, and in group 3 with R = Ho-Lu, Y; a t-Sr2RF7 phase with tetragonal distortion is formed in group 4 with R = Tb-Er, Y; and a phase of trigonal rhα′ type is formed in group 5 with R = Y, Yb, or Lu. A fluorite phase arises in group 1 with R = Tb-Lu, Y as a result of quenching and annealing. The tendency to ordering becomes more pronounced with an increase in the RF3 content and REE atomic number. The annealing conditions do not provide equilibrium or the completely ordered state of all alloys.