As an alternative to correlation-based techniques widely used in conventional speckle metrology, we propose a new technique that makes use of phase singularities in the complex analytic signal of a speckle pattern as indicators of local speckle displacements. The complex analytic signal is generated by vortex filtering the speckle pattern. Experimental results are presented that demonstrate the validity and the performance of the proposed optical vortex metrology with nano-scale resolution.
An in-fiber Fabry-Perot interferometer with fiber Bragg grating (FBG) mirrors (FBG-FPI) yields extremely narrow transmission peaks within the FBG reflection wavelength range. Periodical scanning of the laser light source wavelength produces a train of optical pulses and the occurrence time of the pulse is modulated as the FBG-FPI is under influence of strain. When dynamic strain due to mechanical vibration is applied to the FBG-FPI, the detected signal of the pulse train is Fourier transformed and processed to reproduce the waveform of the vibration-induced strain. Furthermore, an inexpensive DFB laser can be utilized as a light source because the narrowness of the transmission peaks does not require broad wavelength scanning.
Here we present multiple-wavelength digital holographic interferometry with a wide measurement range using laser diodes. Small wavelength differences can be easily realized by the wavelength tuning of laser diodes with injection current controls. A contour map of an object with a wide measurement range and a high sensitivity is demonstrated by combining a few contour maps with several measurement sensitivities. Synthetic wavelengths are calibrated using a known height difference. This alleviates the need to have high precise knowledge of the recording wavelengths. The synthetic wavelengths ranged from for high measurement sensitivity to for wide measurement range. An rms error of for a height measurement is shown. The measured profile of holographic interferometry agrees with a standard stylus instrument.
19 November 2008 in Journal of the Optical Society of America A
Accurate measurement of large step heights using multiple-wavelength holographic interferometry is realized using laser diodes. Due to the high-resolution wavelength tunability of such lasers, a pair of holograms with a wavelength difference of less than is recorded and used to extract a phase difference having a large synthetic wavelength. Phase differences with synthetic wavelengths ranging from are extracted by using pairs of holograms with wavelength differences between 0.3 and . By combining the phase differences, measurements with a step height of and an rms error of could be achieved. The requirements for performing the phase unwrapping are discussed. Precise knowledge of the recording wavelengths is required to correctly perform this unwrapping.
1 December 2005 in Journal of the Optical Society of America A
The entire range of transformations that a Laguerre–Gaussian (LG) beam with astigmatism can go through in free space is clarified. The transformations are governed by the relative phase between the astigmatic Hermite–Gaussian components. Formulas describing the behavior of this relative phase are obtained and used to classify and map the transformation patterns to initial beam parameters. The difference between an LG beam and a phase singular beam generated by a hologram under astigmatic conditions is also investigated.
A novel tunable erbium-doped fiber ring laser (EDFRL) using a cascaded-chirped long period fiber grating (C-CLPG) as a wavelength selection element is proposed. The oscillation wavelength is determined by the one of the spectral peaks of the C-CLPG used, and the oscillation output provides a high signal to noise (S/N) ratio detection and a highly sensitive measurement of the temperature due to its high power and narrow spectral output. In the experiment, it is confirmed that the wavelength of the output shifts in accordance with the temperature-induced spectral shift of the C-CLPG transmittance spectrum and the temperature sensitivity is obtained to be ∼-0.2 nm/°C within the wavelength range of 1567.30 ∼ 1575.78 nm. The oscillation wavelength range is to be limited depending on the fringe spacing of the channeled spectrum of C-CLPG, which limits the temperature measurement range, but a data processing approach to solve this problem is additionally proposed and its availability is also presented.