In this paper, the fractional-order (FO) proportional-integral-derivative (PID) (FO-PID) controller is designed aiming at load-frequency control (LFC) for an isolated hybrid power system, involving a solar photovoltaic generator and a diesel engine generator. The FO-PID controller is a PID controller which has fractional order for integral and derivative. This paper engages’ particle swarm optimization (PSO) algorithm to carry out the above mentioned LFC for the considered wind-biomass isolated hybrid power system. A comparison of FO control strategy with conventional based controller techniques is made. The FO-PID controller outperforms the conventional PID controllers.
Power availability from renewable energy sources (RES) is unpredictable, and must be managed effectively for better utilization. The role that a hybrid energy storage system (HESS) plays is vital in this context. Renewable energy sources along with hybrid energy storage systems can provide better power management in a DC microgrid environment. In this paper, the optimal PI-controller-based hybrid energy storage system for a DC microgrid is proposed for the effective utilization of renewable power. In this model, the proposed optimal PI controller is developed using the particle swarm optimization (PSO) approach. A 72 W DC microgrid system is considered in order to validate the effectiveness of the proposed optimal PI controller. The proposed model is implemented using the MATLAB/SIMULINK platform. To show the effectiveness of the proposed model, the results are validated with a conventional PI-controller-based hybrid energy storage system.
In the present era, electrical power system is evolving to an inverter-dominated system from a synchronous machine-based system, with the hybrid power systems (HPS) and renewable energy generators (REGs) increasing penetration. These inverters dominated HPS have no revolving body, therefore, diminishing the overall grid inertia. Such a low system inertia could create issues for HPS with REG (HPSREG) such as system instability and lack of resilience under disturbances. A control strategy, therefore, is required in order to manage this task besides benefitting from the full potential of the REGs. A virtual inertia control for an HPSREG system built with the principle of fractional order (FO) by incorporation of proportional-integral-derivative (PID) controller and fuzzy logic controller (FLC) has been projected. It is utilized by adding virtual inertia into HPSREG system control loop and referred to as FO based fuzzy PID controller for this study. Simulation outcomes states that the advocated FO based fuzzy PID controller has superior control in frequency of the system under frequent load variations. It has been noted that the proposed control scheme exhibits improved efficiency in maintaining specific reference frequency and power tracking as well as disturbance diminution than optimal classic and FO-based controller. It has been validated that, the developed controller effectively delivers preferred frequency and power provision to a low-inertia HPSREG system against high load demand perturbation. In the presented paper, analysis based on sensitivity has also been performed and it has been found that the HPSREG system’s is not effected by system parameter and load variations.
2 December 2024 in IEEE Transactions on Consumer Electronics
This paper introduces novel high-gain tertiary port boost converter (HGTPBC) designed for hybrid energy sources such as solar photovoltaic (PV) and fuel cells (FC). The converter is employed with dual input sources by facilitating modular converters and accomplishes a high step-up voltage gain by virtue of a voltage multiplier in a DC microgrid, where the prosumers can have an islanded operation. The proposed topology allows home appliances to be powered by multiple energy source without the need for a large storage unit. Key features include continuous input current, reduced normalized voltage stress on switches, expandability for multiple input sources and independent source control. The independent control facilitates the standalone operation with single source during source failure or absence. To evaluate the converter performance, a thorough steady-state analysis, both with and without consideration of nonidealities is carried out. Detailed comparisons with existing converter topologies highlight the advantages of the proposed converter. Moreover, the loss distribution and efficiency analysis of proposed converter are presented and found to be 91.59% efficiency at rated power. Theoretical aspects are validated through hardware testing on a 100W laboratory prototype.