Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.
We present a high-sensitivity fiber optic soil moisture sensor based on side-polished multimode fibers and lossy mode resonance (LMR). The multimode fibers (MMFs), after side-polishing to form a D-shaped structure, are coated with a single-layer SnO2 thin film by electron beam evaporation with ion-assisted deposition technology. The LMR effect can be obtained when the refractive index of the thin film is positive and greater than its extinction coefficient and the real part of the external medium permittivity. The D-shaped fiber optic soil moisture sensor was placed in soil, allowing moisture to penetrate into the thin film microstructure, and it observed the resonance wavelength shift in LMR spectra to measure the relative humidity change in soil. Meanwhile, an Arduino electronic soil moisture sensing module was used as the experimental control group, with soil relative humidity ranging from 10%RH to 90%RH. We found that the D-shaped fiber with a residual thickness of 93 μm and SnO2 thin film thickness of 450 nm had a maximum sensitivity of 2.29 nm/%RH, with relative humidity varying from 10%RH to 90%RH. The D-shaped fiber also demonstrates a fast response time and good reproducibility.
The subwavelength structures formed by data tracks in an optical disk are applied to improve the light-trapping effect for thin-film amorphous silicon (a-Si) solar cell applications. An antireflection coating (ARC) consisting of at least two dielectric layers ( and ) is designed for the top planar surface of the disk. The a-Si thin-film solar cell layer is deposited below the bottom surface of the disk. Finally, a reflective metal coating is attached to the a-Si layer to fully reflect the incident light and extend the round-trip light path. With the proposed configuration, the reflectance and absorptance can be effectively decreased and enhanced by more than 10% compared with those without ARC and structured surfaces.
30 November 2011 in Journal of Lightwave Technology
A small-form-factor (SFF) blue-light optical pickup head (OPH) with holographic optical element (HOE) has been fabricated and assembled. The assembly and alignment of various components in the pickup head were facilitated by using a flip chip bonder. Experimental results indicated that the focusing error signal (FES) of the assembled OPH with the wavelength of 405 nm could be successfully detected. The linear range of the FES was about than 4 μm. The gauge repeatability and reproducibility (GR&R) of the assembly process was tested and found to be acceptable.
1 April 2005 in Japanese Journal of Applied Physics
In this paper, we review a number of digital versatile disk (DVD) pickup designs and present a new structure with two wavelengths using a 780 nm integrated optical unit (IOU) and a 650 nm laser diode (LD) in a single optical path. The 780 nm IOU acts as a sensor for the 650 nm system. Two returned beams of different wavelengths are diffracted by a holographic optical element (HOE) to the same detector. With this construction, the number of components is reduced and alignment is effectively simplified.