Fe-based amorphous alloys are considered potential coating materials for applications in marine corrosive environments owing to their high resistance to chloride ion corrosion. Fe-based amorphous alloy (Fe41Co7Cr15Mo14C15B6Y2) was deposited on AISI 1020 steel using ultrasonic-assisted laser cladding. The research findings revealed a gradient structure generated at the junction of the coating and substrate. Ultrasonic promoted crystallization and increased the gradient structure’s average thickness, reducing coating surface cracks. However, ultrasonic had little effect on the amorphous content of the prepared coating surface, which still had a high amorphous content. The Fe-based amorphous coating prepared via laser cladding with ultrasonic demonstrated good corrosion resistance. The corrosion resistance of the coating without ultrasonic was reduced significantly due to cracks. EIS results confirmed that corrosion resistance was related to crystallization and crack issues. Cr element segregation due to crystallization hindered passivation film forming, reducing its corrosion resistance. Crack corrosion enlarged the crack gap and hollowed out the coating and the substrate’s binding zone, accelerating coating failure.
This paper proposes a new adaptive fractional-order nonsingular terminal sliding mode control scheme integrated with time delay estimation (AFONTSMC–TDE) for cable-driven manipulators. The proposed AFONTSMC–TDE scheme consists of three key elements: time-delay estimation (TDE), a fractional-order nonsingular terminal sliding mode (FONTSM) manifold, and an adaptive variable-gain reaching law. The TDE utilizes intentionally delayed signals to estimate unknown system dynamics, thereby providing a model-free control framework. The FONTSM manifold ensures fast finite-time convergence while inherently avoiding singularity, and the adaptive reaching law dynamically adjusts control gains to achieve rapid response and effective chattering suppression simultaneously. The tracking error is proved to be uniformly ultimately bounded (UUB) via Lyapunov stability analysis. Finally, the superiorities of the proposed AFONTSMC–TDE scheme are validated through experiments on a cable-driven manipulator, demonstrating significant improvements in tracking accuracy over existing fractional-order sliding mode control methods.
Designing a complex pipeline for a floating production storage and offloading (FPSO), particularly over long distances, presents significant challenges in vibration analysis. Traditional modeling methods, which often assume finite lengths and simple configurations, fall short as they do not account for the integrality and locality of long spans and the presence of multiple elastic supports. In response to these limitations, this paper introduces a novel vibration analysis method based on reduced‐order modeling, specifically tailored for complex pipelines with multielastic supports. This innovative approach incorporates the constraint interface stiffness at the elastic supports of the pipeline substructure. By employing modal truncation and assembling a reduced element matrix, the method significantly reduces the complexity of the dynamic model, thereby overcoming the inefficiencies associated with traditional modeling techniques. To demonstrate the effectiveness of this proposed method, two typical FPSO pipelines are analyzed. The study compares the natural frequencies, mode shapes, and calculation times between the full FEM and the reduced‐order model. Results show that the proposed method maintains high accuracy, with natural frequency errors under 4% and minimum MAC values of 0.883. Thus, this study proposes a reduced‐order modeling approach for the vibration analysis of complex pipeline systems on FPSOs.
Fe-based amorphous alloy coatings (Fe41Co7Cr15Mo14C15B6Y2) were fabricated on AISI 1020 steel using ultrasonic-assisted laser cladding to clarify their crystallization mechanism. The amorphous powders follow a three-step crystallization sequence: amorphous → amorphous + bcc-Fe(Co,Cr) → residual amorphous + bcc-Fe(Co,Cr) + intermetallic carbides ((FenCr23-n)(BmC6-m), (Cr21Mo2)C6). The coatings exhibit a gradient structure consisting of planar, columnar, equiaxed crystals, and an amorphous surface layer. Ultrasonic vibration broadens the crystallization zone from ~46 μm to ~81 μm by enhancing solute convection at the molten pool bottom, promoting preferential bcc-Fe(Co) growth. Simultaneously, C and B are driven upward into the residual melt, which improves the glass-forming ability and stabilizes the amorphous phase at the surface. High-resolution TEM and EDS analyses reveal a structurally graded bcc/amorphous interface (~10–12 nm) with nanoscale solute partitioning, where intermetallic carbides enriched in Cr and Mo preferentially nucleate. These findings provide direct evidence of a dual crystallization mechanism regulated by ultrasonic vibration—enhanced crystallization at the coating bottom and preservation of the amorphous phase at the surface. This work offers a new strategy for designing Fe-based amorphous/intermetallic composite coatings with controllable gradient structures and improved structural stability.