Friction anisotropy is an important property of many surfaces that usually facilitate the generation of motion in a preferred direction. Such surfaces are very common in biological systems and have been the templates for various bio-inspired materials with similar tribological properties. So far friction anisotropy is considered to be the result of an asymmetric arrangement of surface nano- and microstructures. However, here we show by using bio-inspired sawtooth-structured surfaces that the anisotropic friction properties are not only controlled by an asymmetric surface topography, but also by the ratio of the sample–substrate stiffness, the aspect ratio of surface structures, and by the substrate roughness. Systematically modifying these parameters, we were able to demonstrate a broad range of friction anisotropies, and for specific sample–substrate combinations even an inversion of the anisotropy. This result highlights the complex interrelation between the different material and topographical parameters on friction properties and sheds new light on the conventional design paradigm of tribological systems. Finally, this result is also of great importance for understanding functional principles of biological materials and surfaces, as such inversion of friction anisotropy may correlate with gait pattern and walking behaviour in climbing animals, which in turn may be used in robotic applications.
1 January 2012 in Theoretical and Applied Mechanics Letters
This letter reviews the adhesive and frictional properties of the first mushroom-shaped adhesivemicrostructure (MSAMS), which has come a long way from inspiration by the attachment devices evolved in beetles to a large-scale industrial production. It was shown to have an that about twice higher pull-off force compared to a smooth control made from the same materialmeasured on smooth substrates. Pull-off forces measured underwater are even higher than those in air. Moreover, it retained adhesive performance over thousands of attachment cycles and initial adhesive capability could be recovered by washing after being contaminated. In shearing, MSAMS exhibits reduced and stabilized friction in comparison with a smooth control, which demonstrated pronounced stick-slip motion, and shows zero pull-off force in a sheared state, allowing the adhesion to be switched on and off. The presence of a fluid in the contact zone showed adhesion enhancement on both smooth and rough substrates. All these features lead us to conclude that MSAMS may have practical potential in a variety of applications.
Bee lice (Braulidae) are small parasitic flies, which are adapted to live on their bee host. As such, the wingless Braula coeca is a parasite of the common honey bee Apis mellifera and it is well adapted to attach to its hairy surface. The attachment system of B. coeca provides a secure grip on the fine setae of the bee. This is crucial for the parasite survival, as detachment from the host is fatal for the bee louse. The feet morphology of B. coeca is well adapted to the challenging bee surface, notably by strongly broadened claws, which are split into a high number of comb‐like teeth, perfectly matching the diameter of the bee hairs. Based on microscopy observations, both the morphology and material composition of the tarsi of B. coeca are characterized in detail. Using high‐speed video analysis, we combine the morphology data on the attachment system with a behavioural context. Furthermore, we directly measured the attachment forces generated by the bee lice in contact with the host. In particular, the claws are involved in attachment to the host, as the interstices between the teeth‐like spines allow for the collection of several hairs and generate strong friction, when the hairs slip to the narrow gap between the spines. The overall morphology of the tarsus produces strong attachment, with average safety factors (force per body weight) around 1130, and stabilizes the tarsal chain with lateral stoppers against overflexion, but also allows for the fast detachment by the tarsal chain torsion.
25 June 2014 in Beilstein Journal of Nanotechnology
In this work we report on experiments aimed at testing the cavitation hypothesis [Varenberg, M.; Gorb, S. J. R. Soc., Interface2008,5, 383–385] proposed to explain the strong underwater adhesion of mushroom-shaped adhesive microstructures (MSAMSs). For this purpose, we measured the pull-off forces of individual MSAMSs by detaching them from a glass substrate under different wetting conditions and simultaneously video recording the detachment behavior at very high temporal resolution (54,000–100,000 fps). Although microcavitation was observed during the detachment of individual MSAMSs, which was a consequence of water inclusions present at the glass–MSAMS contact interface subjected to negative pressure (tension), the pull-off forces were consistently lower, around 50%, of those measured under ambient conditions. This result supports the assumption that the recently observed strong underwater adhesion of MSAMS is due to an air layer between individual MSAMSs [Kizilkan, E.; Heepe, L.; Gorb, S. N. Underwater adhesion of mushroom-shaped adhesive microstructure: An air-entrapment effect. In Biological and biomimetic adhesives: Challenges and opportunities; Santos, R.; Aldred, N.; Gorb, S. N.; Flammang, P., Eds.; The Royal Society of Chemistry: Cambridge, U.K., 2013; pp 65–71] rather than by cavitation. These results obtained due to the high-speed visualisation of the contact behavior at nanoscale-confined interfaces allow for a microscopic understanding of the underwater adhesion of MSAMSs and may aid in further development of artificial adhesive microstructures for applications in predominantly liquid environments.
A not yet described type of material gradient in discoidal setae of male leaf beetles is shown that is suggested to facilitate their adaptability to curved and non-parallel surfaces.