A planar-capacitive tilt sensor with concentric annular electrodes is proposed for further expansion of inclination measurement range. Using dielectric liquid as a sensing pendulum, the proposed sensor can measure the inclination angle of an object with respect to gravity, such as a crane boom or a robot manipulator. The capacitance values of four segmented annular planar capacitors in sensor head vary with the rotation of the object. Such measurement mechanism remains effective even with a 360° rotation. In our lab, a tilt-sensor prototype was assembled with optimized sensor head and suitable dielectric liquid and its performance was evaluated on a tilted plane. Experimental results show that a full measurement range of 360° was achieved with an accuracy of 0.4° and a resolution better than 0.1°. Moreover, the proposed tilt sensor is easy to fabricate, and its components are available at a low cost.
Concurrent passive mode-locked and self--switched operation of laser devices is modeled using the complex cubic-quintic Ginzburg-Landau equation. Experimental observations use a passively mode-locked fiber ring laser with a waveguide array as a fast saturable absorber. The shape of each individual self--switched pulse and the periodic trains of pairs of such pulses are in a good qualitative agreement with the numerical results.
An investigation of a segmented annular coplanar capacitor is presented. We focus on its theoretical model, and a mathematical expression of the capacitance value is derived by solving a Laplace equation with Hankel transform. The finite element method is employed to verify the analytical result. Different control parameters are discussed, and each contribution to the capacitance value of the capacitor is obtained. On this basis, we analyze and optimize the structure parameters of a segmented coplanar capacitive tilt sensor, and three models with different positions of the electrode gap are fabricated and tested. The experimental result shows that the model (whose electrode-gap position is 10 mm from the electrode center) realizes a high sensitivity: 0.129 pF/° with a non-linearity of <0.4% FS (full scale of ±40°). This finding offers plenty of opportunities for various measurement requirements in addition to achieving an optimized structure in practical design.
The development of electronic transformers is becoming faster with the development of intelligent substation technology. Although it has better improvement in stability, safety and other performance than traditional transformers, there are still some difficulties in the aspects of measurement situation monitoring, status and error evaluation. In order for electronic transformers to be better put into engineering use, their operational reliability must be well evaluated. In this paper, Xgboost is used to model the operation error of the electronic transformer, and the result of the model is processed to obtain the operational reliability probability of the electronic transformer. First, the collected data is clustered by the DBSCAN density clustering algorithm. Then the reliability probability is calculated for each cluster, and then the reliability probability is used as a label, and the collected data is used as an input to establish an Xgboost model. The trained model can make a probabilistic assessment of the operational reliability of an electronic transformer without the measurement results of traditional electronic transformers as standard.
Light propagation in arrays of AlxGa1-xAs waveguides is studied. The power coupling constant between two adjacent waveguides is precisely measured as waveguide material and structure is varied. Aluminum concentration contrast between waveguide core/cladding layers and waveguide width/height produce an asymmetric effective refractive index between linearly polarized modes, which in turn causes a polarization dependence of the coupling constants. Experimental measurement results agree well with an analytical model. The sensitivity of coupling constant to the waveguide parameters is analyzed. Through a careful geometric design, comparable coupling constants can be achieved in three waveguide arrays with different structure. Similar formation processes of discrete spatial optical solitons are observed respectively, confirming that the parameterization in the discrete nonlinear Schrödinger equation characterizes waveguide arrays.