Barsha Jain

Mrs. Barsha Jain

New Jersey Institute of Technology
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 July 2019 in Micromachines
Verified
Journal Article
Open access
PDF file
HBHA QUOC THANG BUI
HA QUOC THANG BUI
RVRavi Teja Velpula
Ravi Teja Velpula
BJBarsha Jain
Barsha Jain
OAOmar Hamed Aref
Omar Hamed Aref
HNHoang-Duy Nguyen
Hoang-Duy Nguyen
Hieu Pham Trung NguyenHieu Pham Trung Nguyen
Hieu Pham Trung Nguyen
We have demonstrated full-color and white-color micro light-emitting diodes (μLEDs) using InGaN/AlGaN core-shell nanowire heterostructures, grown on silicon substrate by molecular beam epitaxy. InGaN/AlGaN core-shell nanowire μLED arrays were fabricated with their wavelengths tunable from blue to red by controlling the indium composition in the device active regions. Moreover, our fabricated phosphor-free white-color μLEDs demonstrate strong and highly stable white-light emission with high color rendering index of ~ 94. The μLEDs are in circular shapes with the diameter varying from 30 to 100 μm. Such high-performance μLEDs are perfectly suitable for the next generation of high-resolution micro-display applications.

17 August 2020 in International Journal of Numerical Modelling: Electronic Networks, Devices and Fields
Verified
Journal Article
Closed access
PDF file
RSRajan Singh
Rajan Singh
TLTrupti Ranjan Lenka
Trupti Ranjan Lenka
RVRavi Teja Velpula
Ravi Teja Velpula
BJBarsha Jain
Barsha Jain
HBHa Quoc Thang Bui
Ha Quoc Thang Bui
HNHieu Pham Trung Nguyen
Hieu Pham Trung Nguyen

2 December 2022 in Nanotechnology
Verified
Journal Article
Closed access
RVRavi Teja Velpula
Ravi Teja Velpula
BJBarsha Jain
Barsha Jain
Hieu Pham Trung NguyenHieu Pham Trung Nguyen
Hieu Pham Trung Nguyen
In this study, multilevel switching at low-power in Ti/TiN/Ga2O3/Ti/Pt resistive random-access memory (RRAM) devices has been systematically studied. The fabricated RRAM device exhibits an excellent non-overlapping window between set and reset voltages of ∼1.1 V with a maximum R off/R on ratio of ∼103. Moreover, to the best of our knowledge, the multi-bit storage capability of these RRAM devices with a reasonably high R off/R on ratio is experimentally demonstrated, for the first time, for lower compliance currents at 10 μA, 20 μA and 50 μA. The multi-bit resistive switching behavior of the Ga2O3 RRAM device at a low compliance current paves the way for low-power and high-density data storage applications.

21 March 2021 in Micromachines
Verified
Journal Article
Open access
PDF file
BJBarsha Jain
Barsha Jain
RVRavi Teja Velpula
Ravi Teja Velpula
MPMoulik Patel
Moulik Patel
Sharif SadafSharif Sadaf
Sharif Sadaf
Hieu Pham Trung NguyenHieu Pham Trung Nguyen
Hieu Pham Trung Nguyen
To prevent electron leakage in deep ultraviolet (UV) AlGaN light-emitting diodes (LEDs), Al-rich p-type AlxGa(1−x)N electron blocking layer (EBL) has been utilized. However, the conventional EBL can mitigate the electron overflow only up to some extent and adversely, holes are depleted in the EBL due to the formation of positive sheet polarization charges at the heterointerface of the last quantum barrier (QB)/EBL. Subsequently, the hole injection efficiency of the LED is severely limited. In this regard, we propose an EBL-free AlGaN deep UV LED structure using graded staircase quantum barriers (GSQBs) instead of conventional QBs without affecting the hole injection efficiency. The reported structure exhibits significantly reduced thermal velocity and mean free path of electrons in the active region, thus greatly confines the electrons over there and tremendously decreases the electron leakage into the p-region. Moreover, such specially designed QBs reduce the quantum-confined Stark effect in the active region, thereby improves the electron and hole wavefunctions overlap. As a result, both the internal quantum efficiency and output power of the GSQB structure are ~2.13 times higher than the conventional structure at 60 mA. Importantly, our proposed structure exhibits only ~20.68% efficiency droop during 0–60 mA injection current, which is significantly lower compared to the regular structure.

11 September 2020 in Optics Letters
Verified
Journal Article
Closed access
RVRavi Teja Velpula
Ravi Teja Velpula
BJBarsha Jain
Barsha Jain
SVSwetha Velpula
Swetha Velpula
HNHoang-Duy Nguyen
Hoang-Duy Nguyen
Hieu Pham Trung NguyenHieu Pham Trung Nguyen
Hieu Pham Trung Nguyen
In this Letter, the electron-blocking-layer (EBL)-free AlGaN ultraviolet (UV) light-emitting diodes (LEDs) using a strip-in-a-barrier structure have been proposed. The quantum barrier (QB) structures are systematically engineered by integrating a 1 nm intrinsic A l x G a ( 1 − x ) N strip into the middle of QBs. The resulted structures exhibit significantly reduced electron leakage and improved hole injection into the active region, thus generating higher carrier radiative recombination. Our study shows that the proposed structure improves radiative recombination by ∼ 220 % , reduces electron leakage by ∼ 11 times, and enhances optical power by ∼ 225 % at 60 mA current injection compared to a conventional AlGaN EBL LED structure. Moreover, the EBL-free strip-in-a-barrier UV LED records the maximum internal quantum efficiency (IQE) of ∼ 61.5 % which is ∼ 72 % higher, and IQE droop is ∼ 12.4 % , which is ∼ 333 % less compared to the conventional AlGaN EBL LED structure at ∼ 284.5 n m wavelength. Hence, the proposed EBL-free AlGaN LED is the potential solution to enhance the optical power and produce highly efficient UV emitters.

19 August 2020 in Applied Optics
Verified
Journal Article
Closed access
PDF file
HBHa Quoc Thang Bui
Ha Quoc Thang Bui
RVRavi Teja Velpula
Ravi Teja Velpula
BJBarsha Jain
Barsha Jain
MPMoab Rajan Philip
Moab Rajan Philip
HTHien Duy Tong
Hien Duy Tong
Hieu Pham Trung NguyenHieu Pham Trung Nguyen
Hieu Pham Trung Nguyen
Potassium hydroxide (KOH) and ammonium sulfide ( N H 4 ) 2 S x have been used as a surface passivation treatment to improve the electrical and optical performance of AlGaN nanowire ultraviolet (UV) light-emitting diodes (LEDs). Enhancements in photoluminescence at 335 nm (49%), optical output power (65%), and electroluminescence (83%), with respect to the as-grown nanowire LED are recorded for the AlGaN nanowire UV LEDs with surface passivation. These enhancements are attributed to the reduced nonradiative recombination on the nanowire surfaces. This study provides a potential surface passivation approach to produce high-power AlGaN nanowire LEDs operating in the UV spectrum.