Sediment yield is a key factor in river basins management due to the various and adverse consequences that erosion and sediment transport in rivers may have on the environment. Although various contributions can be found in the literature about sediment yield modeling and bank erosion monitoring, the link between weather conditions, river flow rate and bank erosion remains scarcely known. Thus, a basin scale assessment of sediment yield due to riverbank erosion is an objective hard to be reached. In order to enhance the current knowledge in this field, a monitoring method based on high resolution 3D model reconstruction of riverbanks, surveyed by multi-temporal terrestrial laser scanning, was applied to four banks in Val Tartano, Northern Italy. Six data acquisitions over one year were taken, with the aim to better understand the erosion processes and their triggering factors by means of more frequent observations compared to usual annual campaigns. The objective of the research is to address three key questions concerning bank erosion: “how” erosion happens, “when” during the year and “how much” sediment is eroded. The method proved to be effective and able to measure both eroded and deposited volume in the surveyed area. Finally an attempt to extrapolate basin scale volume for bank erosion is presented.

Landslides over steep slopes, floods along rivers plains and debris flows across valleys are hydrogeological phenomena typical for mountain regions. Such events are generally triggered by rainfall, which can have large variability in terms of both its intensity and volume. Furthermore, terrain predisposition and the presence of some disturbances, such as wildfires, can have an adverse effect on the potential risk. Modelling the complex interaction between these components is not a simple task and cannot always be carried out using instability thresholds that only take into account the characteristics of the rainfall events. In some particular cases, external factors can modify the existing delicate equilibrium on the basis of which stability thresholds are defined. In particular, events such as wildfires can cause the removal of vegetation coverage and the modification of the soil terrain properties. Therefore, wildfires can effectively reduce the infiltration capacity of the terrain and modify evapotranspiration. As a result, key factors for slope stability, such as the trend of the degree of saturation of the terrain, can be strongly modified. Thus, studying the role of wildfire effects on the terrain’s hydrological balance is fundamental to establish the critical conditions that can trigger potential slope failures (i.e., shallow landslides and possible subsequent debris flows). In this work, we investigate the consequences of wildfire on the stability of slopes through a hydrological model that takes into account the wildfire effects and compare the results to the current stability thresholds. Two case studies in the Ardenno (IT) and Ronco sopra Ascona (CH) municipalities were chosen for model testing. The aim of this paper is to propose a quantitative analysis of the two cases studies, taking into account the role of fire in the slope stability assessment. The results indicate how the post-fire circumstances strongly modify the ability of the terrain to absorb rainfall water. This effect results in a persistently drier terrain until a corner point is reached, after which the stability of the slope could be undermined by a rainfall event of negligible intensity.

Shallow soil slips are a significant hydrogeological hazard which could affect extended areas of the high-gradient mountainous landscape. Their triggering is highly dependent on the rainfall water infiltration and its further redistribution, as well as the characteristic properties of the soil itself. The complex interaction between those factors generates a considerable degree of uncertainty in the understanding of the governing processes. In this work, we take a small step further towards the untangling of those intricate relationships through observation. The results of a set of 20 downscaled shallow land mass failures are analysed through a principal component analysis and a further detailed look at the resulting parametric trends. Moreover, electrical resistivity tomography measurements are added up to the interpretation of experimental data, by providing a glimpse on the rainfall water infiltration process at the subsurface level. The outcome of this work implies that the coupled interaction between rainfall intensity, hydraulic conductivity and soil moisture gradient is governing the stability of soil and while rainfall intensity and duration are essential instability predictors, they must be integrated with antecedent moisture and site-specific characteristics. A tentative comparison of the dataset with existing rainfall thresholds for shallow landslide occurrence suggests the potential application of experimental tests for thresholds’ definition or validation under the appropriate dimensional analysis. A dimensional analysis indicated the interconnection of parameters intrinsic to the problem, and the significance of scale effects in performing a downscaled simulation of land mass failure.

We present the results of laboratory experiments on a down-scaled river levee constructed with clayey material collected from a river embankment where a permanent resistivity instrument has operated since 2015. To create potential seepages through the levee, two zones (5 × 4 cm and 10 × 2 cm) were filled with sand during the levee construction. Electrical resistivity tomography (ERT) technique and Fiber Bragg Grating (FBG) technology were used to study time-lapse variations due to seepage. The ERT profile was spread on the levee crest and the Wenner array with unit electrode spacing a = 3 cm was used. Six organic modified ceramics (ORMOCER) coated 250 μm-diameter fibers were deployed in different parts of the levee. Time-lapse measurements were performed for both techniques from the beginning of each experiment when water was added to the river side until the water was continuously exiting from the seepage zones. The results showed that ERT images could detect seepages from the early stages. Although with a short delay compared to ERT, fiber optic sensors also showed their ability to detect water infiltrations by measuring temperature changes. Both technologies being successful, a discussion about respective peculiarities and pros and cons is proposed to suggest some criteria in choosing the proper technique according to the specific needs.

International directives encourage the incorporation of sediment transport analyses into flood risk assessment, in recognition of the significant role played by sediment in flood hazard. However, examples of risk analysis frameworks incorporating the effect of sediment transport are still not widespread in the literature, resulting in a lack of clear guidelines. This manuscript considers a study site in the Italian Alps and presents a hydro-morphologic model for generation of flood scenarios towards hazard assessment. The analysis is concentrated on a design flood event with 100-year return period, for which an outflowing discharge is computed as a result of the river modeling. However, it is also argued how suitable model input parameter values can be obtained from analyses of river flows in a yearly duration curve. Modeling tools are discussed with respect to their capabilities and limitations. The results of the analysis are site-specific, but the proposed methodology can be exported to other hydro-graphic basins.