The main challenge facing greenhouse designers is to achieve environment-appropriate greenhouses, especially in tropical regions. The excess radiant energy transmitted into the greenhouse predisposes plants to photo-inhibition and consequently reduces crop production. Lately, photovoltaic (PV) modules are equipped as a greenhouse rooftop to minimize the level of irradiation and air temperature in the greenhouse, simultaneously improving its energy consumption. Nevertheless, due to the low level of irradiation, denser conventional PV internal shading would influence the cultivated crops’ growth. Thus, Dye Sensitized Solar Cell (DSSC) possesses several attractive features such as transparent, sensitive to low light levels, and various color options that render DSSC a perfect choice able to serve substantially in energy buildings. This study assessed the microclimate conditions inside the greenhouse with semi-transparent DSSC mounted on top of it, describing the Photosynthetic Photon Flux Density (PPFD) (µmol m⁻² s⁻¹), Vapor Pressure Deficit VPD (kPa), relative humidity (%), and also temperature (°C). The Overall Thermal Transfer Value (OTTV), which indicates the average thermal energy transmission rate across the external layer of a structure envelope, is also presented. The effects of colored DSSC in altering the spectral of sunlight in reference to the Orthosiphon stamineus growth responses were determined. The information of the condition of DSSC greenhouse microclimate helps to identify the information for designing PV greenhouses and to produce income from both electric power and agronomic activity.

Photovoltaic farms in Malaysia are being developed tremendously as a form of supporting fossil fuel setbacks in Malaysia power generation. An important parameter of the PV installation is the power (Watts) accumulated over sunlight retrieval. Considerable losses may arise from the conversion, where the efficiency is typically 15% to 23%, with the remainder becoming losses in the form of accumulated heat under the PV array or panel installations. PV heat dissipation is dependent on solar radiation, air convection and PV cell conduction. Dye Sensitized Solar Cell (DSSC) has been applied as a greenhouse shading element, having the ability of enabling specified spectrum of light color penetration during electric accumulation. Furthermore, only light of wavelength between 400 and 700 nm (PAR) is absorbed by the greenhouse plants which is essential for their growth and photosynthesis. A Portable DSSC Mini Greenhouse (PDMG) can provide simple, effective and suitable light source for botanical drugs. Light which is associated with increasing temperature and heat is critical to be measured. A measurement of average heat gain flowing into a building through building envelope (OTTV- Overall Thermal Transfer Value) is a well-known method adopted in green building design. In this paper, the OTTV approach is applied to calculate heat transfer properties, from outdoor surroundings to the PDMG structure, giving justification of the PDMG thermal conditions.

This paper presents a finger-actuated micropump with a consistent flow rate and no backflow. The fluid dynamics in interstitial fluid (ISF) extraction microfluidics are studied through analytical, simulation, and experimental methods. Head losses, pressure drop, diodocity, hydrogel swelling, criteria for hydrogel absorption, and consistency flow rate are examined in order to access microfluidic performance. In terms of consistency, the experimental result revealed that after 20 s of duty cycles with full deformation on the flexible diaphragm, the output pressure became uniform and the flow rate remained at nearly constant levels of 2.2 μL/min. The flow rate discrepancy between the experimental and predicted flow rates is around 22%. In terms of diodicity, when the serpentine microchannel and hydrogel-assisted reservoir are added to the microfluidic system integration, the diodicity increases by 2% (Di = 1.48) and 34% (Di = 1.96), respectively, compared to when the Tesla integration (Di = 1.45) is used alone. A visual and experimentally weighted analysis finds no signs of backflow. These significant flow characteristics demonstrate their potential usage in many low-cost and portable microfluidic applications.