A labyrinth weir is a linear weir folded in plan-view which increases the crest length and the flow rate for a given channel width and an upstream flow depth. The present study aimed at determining discharge coefficients of labyrinth and arced labyrinth weirs using support vector machine (SVM)-based models. A total of 527 laboratory test data of four types of weirs, namely, Normal and Inverted orientation Labyrinth Weirs in flume (NLW, ILW) and Arced Labyrinth Weirs with and without nappe Breakers in reservoir (ALW, ALWB), were captured from the published literature and utilized to feed the SVM-based models. The obtained results revealed the capability of the SVM-based models in determining discharge coefficients. The results showed that the SVM-based model of arced labyrinth weir (ALW) produced the most accurate results when three dimensionless parameters, e.g. (HT/P) head water ratio, (α/θ) angle ratio and (Lc/W) magnification ratio, were introduced as input parameters (Root mean square error [RMSE]= 0.013 and R2 = 0.970 for the test stage). Nonetheless, sensitivity analysis showed that Froude number and head water ratio are the most influential parameters on discharge coefficients of the labyrinth and arced labyrinth weirs, respectively.
Mining activities can endanger the stability of hydraulic structures. Numerical modeling of local scouring around hydrodynamic and circular bridge pile groups, due to the action of clear water conditions via non-cohesive sediment, was performed using a computational fluid dynamics (CFD) model, a large eddy simulation (LES) turbulence model, and a van Rijn sedimentary model with FLOW-3D software. The pile groups were positioned upstream and downstream of a sand mining pit. The results showed that the scour depth around the downstream pile group was greater than that of the upstream one. Using hydrodynamic piers reduced the scour depth upstream of all piers and the material harvesting pit. The maximum reduction in scour depth was observed in front of the fifth pier, with a 29% reduction in scour depth. Additionally, for all models, as the material harvesting pit was moved downstream, the downstream turbulence was enhanced and stronger flow reversal and horseshoe vortices were detected in from of the downstream pile group. The flow patterns around the pile group showed that the presence of hydrodynamic piers in the upstream pile group leads to a decrease in the maximum flow velocity, whereas, when such piers were positioned in the downstream pile group, the velocity increases.
17 February 2017 in Ish Journal of Hydraulic Engineering
As a remarkable parameter, the discharge coefficient (Cd) plays an important role in determining weirs' passing capacity. In this research work, the support vector machine (SVM) and the gene expression programming (GEP) algorithms were assessed to predict Cd of piano key weir (PKW), rectangular labyrinth weir (RLW), and trapezoidal labyrinth weir (TLW) with gathered experimental data set. Using dimensional analysis, various combinations of hydraulic and geometric non-dimensional parameters were extracted to perform simulation. The superior model for the SVM and the GEP predictor for PKW, RLW, and TLW included , and respectively. The results showed that both algorithms are potential in predicting discharge coefficient, but the coefficient of determination (RMSE, R2, Cd(DDR)max) illustrated the superiority of the GEP performance over the SVM. The results of the sensitivity analysis determined the highest effective parameters for PKW, RLW, and TLW in predicting discharge coefficients are , , and Fr respectively.
23 February 2024 in Flow Measurement and Instrumentation