Dimitris Theodoropoulos

Mr. Dimitris Theodoropoulos

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 September 2020 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Verified
Journal Article
Closed access
ATAntonis Tsigkanos
Antonis Tsigkanos
NKNektarios Kranitis
Nektarios Kranitis
DTDimitris Theodoropoulos
Dimitris Theodoropoulos
APAntonios Paschalis
Antonios Paschalis
Nowadays, hyperspectral imaging is recognized as a cornerstone remote sensing technology. Next generation, high-speed airborne, and space-borne imagers have increased resolution, resulting in an explosive growth in data volume and instrument data rate in the range of gigapixel per second. This competes with limited on-board resources and bandwidth, making hyperspectral image compression a mission critical on-board processing task. At the same time, the ``new space'' trend is emerging, where launch costs decrease, and agile approaches are exploited building smallsats using commercial-off-the-shelf (COTS) parts. In this contribution, we introduce a high-performance parallel implementation of the CCSDS-123.0-B-1 hyperspectral compression algorithm targeting SRAM field-programmable gate array (FPGA) technology. The architecture exploits image segmentation to provide the robustness to data corruption and enables scalable throughput performance by leveraging segment-level parallelism. Furthermore, we exploit the capabilities of a COTS FPGA system-on-chip (SoC) device to optimize size, weight, power, and cost (SWaP-C). The architecture partitions a hyperspectral cube stored in a DRAM framebuffer into segments, compressing them in parallel using a flexible software scheduler hosted in the SoC CPU and several compressor accelerator cores in the FPGA fabric. A 5-core implementation demonstrated on a Zynq-7045 FPGA achieves a throughput performance of 1387 Msamples/s [22.2 Gb/s at 16 bits per pixel per band (bpppb)] and outperforms previous implementations in equivalent FPGA technology, allowing seamless integration with next-generation hyperspectral sensors.

2 March 2020 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Verified
Journal Article
Closed access
DTDimitris Theodoropoulos
Dimitris Theodoropoulos
NKNektarios Kranitis
Nektarios Kranitis
ATAntonis Tsigkanos
Antonis Tsigkanos
APAntonios Paschalis
Antonios Paschalis
Quasi-cyclic low-density parity-check (QC-LDPC) codes have been adopted by the Consultative Committee for Space Data Systems (CCSDS) as the recommended standard for onboard channel coding in Near-Earth and Deep-Space communications. Encoder architectures proposed so far are not efficient for high-throughput hardware implementations targeting the specific CCSDS codes. In this article, we introduce a novel architecture for the multiplication of a dense quasi-cyclic (QC) matrix with a bit vector, which is the fundamental operation of QC-LDPC encoding. The architecture leverages the inherent parallelism of the QC structure by concurrently processing multiple bits, according to an optimized scheduling. Based on this architecture, we propose efficient encoders for CCSDS codes, according to all the applicable low-density parity-check (LDPC) code encoding methods. Moreover, in the special case of the code for Near-Earth communications, we also introduce a preprocessing algorithm to efficiently handle the challenges arising from the generator's matrix circulant size (511 bits). The proposed architectures have been implemented in various field-programmable gate array (FPGA) technologies and validated in Zynq UltraScale+ multiprocessor system-on-chip (MPSoC), achieving a significant speedup compared with previous approaches, while at the same time keeping resource utilization low.

10 May 2022 in IEEE Transactions on Aerospace and Electronic Systems
Verified
Journal Article
Closed access
PCPanagiotis Chatziantoniou
Panagiotis Chatziantoniou
ATAntonis Tsigkanos
Antonis Tsigkanos
DTDimitris Theodoropoulos
Dimitris Theodoropoulos
NKNektarios Kranitis
Nektarios Kranitis
APAntonios Paschalis
Antonios Paschalis
Nowadays, hyperspectral imaging is recognized as a cornerstone remote sensing technology. The explosive growth in image data volume and instrument data rates, compete with limited on-board storage resources and downlink bandwidth, making hyperspectral image data compression a mission critical on-board processing task. Recently, the Consultative Committee for Space Data Systems (CCSDS) extended the previous issue of the CCSDS-123.0 Recommended Standard for multi- and hyperspectral image compression to provide with Near-Lossless compression functionality. A key feature of the CCSDS-123.0-B-2 is the improved Hybrid Entropy Coder, which at low bit rates, provides substantially better compression performance than the Issue 1 entropy coders. In this paper, we introduce a high-throughput hardware implementation of the CCSDS-123.0-B-2 Hybrid Entropy Coder. The introduced architecture exploits the systolic design pattern to provide modularity and latency insensitivity in a deep and elastic pipeline achieving a constant throughput of 1 sample/cycle with a small FPGA resource footprint. This architecture is described in portable VHDL RTL and it is implemented, validated and demonstrated on a commercially available Xilinx KCU105 development board hosting a Xilinx Kintex Ultrascale XCKU040 SRAM FPGA, and thus, is directly transferable to the Xilinx Radiation Tolerant Kintex UltraScale XQRKU060 space-grade devices for space deployments. Moreover, state-of-the-art SpaceFibre (ECSS-E-ST-50-11C) serial link interface and test equipment were used in the validation platform to emulate an on-board deployment. The introduced CCSDS-123.0-B-2 Hybrid Entropy Encoder achieves a constant throughput performance of 305 MSamples/s. To the best of our knowledge, this is the first published fully-compliant architecture and high-throughput implementation of the CCSDS-123.0-B-2 Hybrid Entropy Coder, targeting space-grade FPGA technology.

26 June 2024 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Verified
Journal Article
Closed access
PCPanagiotis Chatziantoniou
Panagiotis Chatziantoniou
ATAntonis Tsigkanos
Antonis Tsigkanos
DTDimitris Theodoropoulos
Dimitris Theodoropoulos
NKNektarios Kranitis
Nektarios Kranitis
APAntonis Paschalis
Antonis Paschalis
Hyperspectral and multispectral imaging maintains a crucial role in remote sensing technology for Earth observation missions. However, the huge volume of produced data requires compression for storage and downlink transmission. In 2019, the Consultative Committee for Space Data Systems (CCSDS) released the CCSDS 123.0-B-2 recommended standard, allowing near-lossless compression, through a closed-loop quantizer, by introducing a Hybrid Entropy Coder option. However, the in-loop quantizer introduced additional data dependencies constituting a throughput performance bottleneck. This contribution addresses the need for high data-rate on-board compression by presenting an efficient parallel architecture and hardware implementation based on CCSDS 123.0-B-2. It bypasses the throughput performance bottleneck with an external, hardware-efficient quantizer while maintaining competitive quality near-lossless functionality with compatibility to the CCSDS standard. The parallel architecture leverages segmentation along the X-axis of the spectral cube, enabling scalable data-rate performance with constant embedded memory footprint. The introduced architecture is implemented in VHSIC hardware description language (VHDL) indicatively targeting Xilinx Kintex UltraScale technology, validated and demonstrated using state-of-the-art SpaceFibre serial link interface IP Cores and test equipment, achieving very high code coverage. A single hyperspectral compression engine (HCE) achieves throughput performance of 285 MSamples/s (4.56 Gb/s) at 1.68 W, while six parallel HCEs reach 1590 MSamples/s (25.44 Gb/s) at 6.12 W, measured on a full breadboard system. Maximum performance only depends on image dimensions, available field programmable gate array (FPGA) resources and high-speed serial interface technology. To the best of our knowledge, this implementation achieves the highest data-rate performance for near-lossless compression based on CCSDS 123.0-B-2 implemented in FPGA technology suitable for next-generation institutional missions.

30 November 2021 in IEEE Transactions on Aerospace and Electronic Systems
Verified
Journal Article
Closed access
DTDimitris Theodoropoulos
Dimitris Theodoropoulos
NKNektarios Kranitis
Nektarios Kranitis
ATAntonis Tsigkanos
Antonis Tsigkanos
EMElias Machairas
Elias Machairas
APAntonios Paschalis
Antonios Paschalis
Forward Error Correction (FEC) coding schemeshave been used extensively in order to provide continuousand reliable telemetry data transfer from satellites to groundstations and guarantee reliable communications even at lowsignal-to-noise ratio regimes, where burst errors are dominant.Nevertheless, conventional bit-level channel coding can fail toprovide downlink reliability against long error bursts in futurehigh data rate radio frequency (RF) and optical (laser) links,especially when automatic repeat queuing (ARQ) strategies areeither problematic or impossible due to specific service delayconstraints. Packet-level erasure coding has been considered bythe Consultative Committee for Space Data Systems (CCSDS) inCCSDS 131.5-O-1 experimental specification for application inhigh data rate near-earth and deep-space communications, sinceit can protect against long error bursts as they may come alongwith the effect of scintillation outages or transmission errors.Implementations of packet-level encoding and decoding so farexist only in software, running on a general-purpose CPU. Inthis work, we introduce and compare analytical descriptions ofpacket-level encoding algorithms suitable for hardware imple-mentations. Based on these algorithmic descriptions, we intro-duce, for the first time, architectures for hardware accelerationof these functions that allow integration on a high-speed on-boarddata processing chain with very low footprint. We validate ourhardware implementations and demonstrate the efficiency of theproposed architectures on a Xilinx KCU105 development board,which is built around the commercial equivalent of a space-grade Field Programmable Gate Array (FPGA) device. Apartfrom offloading packet-level encoding from the on-board em-bedded processor, the proposed accelerators achieve a significantspeedup (over 80 times), when compared with on-board softwareimplementations by porting on some of the most commonly usedand state-of-the-art space-qualified embedded processors.