A promising way of realizing the 5th generation (5G) wireless systems is to operate 5G deployments in higher frequency bands, specifically in the millimeter wave (mmW) spectrum (30- 300 gigahertz, GHz). Access to such spectrum bands will enable future 5G wireless systems to meet the 5G requirements of peak rate greater than 10 Gbps, and cell edge rate of up to 1 Gbps. However, the emerging 5G systems will need to coexist with a number of incumbent systems in these bands. This paper provides an extensive study of co-channel coexistence of 5G in two critical mmW bands, 27.5-28.35 GHz (28 GHz) and 71-76 GHz (70 GHz) bands, where Fixed Satellite Service (FSS) and Fixed Service (FS) such as Wireless Backhaul (WB) are the predominant incumbent users. In the 28 GHz study, we show that interference from 5G into the FSS Space Stations (SSs) can be kept below the FSS interference protection criterion. We also characterize the minimum separation distance between the FSS Earth Stations (ESs) and 5G in order to protect the 5G system from interference due to the ESs transmissions. In the 70 GHz study, we show that the 5G-to-FS interference could be a potential issue in certain scenarios, but we introduce techniques to significantly suppress this interference, while maintaining acceptable performance of the 5G systems. For each study, we suggest appropriate deployment strategies for a 5G system based on our results.
This paper investigates how ‘mobility’ affects the performance of a blockchain system operating in a vehicular ad-hoc network (VANET). The mobility of nodes incurs a unique challenge to a blockchain system due to continuous change and dynamicity in connectivity of the nodes. Specifically, the mobility makes a proof-of-work (PoW) process difficult since, while moving, the nodes can only have a limited length of time for a “rendezvous” to exchange a new block for verification. For this reason, an accurate modeling for the block exchange behavior in a VANET is also challenging, which nevertheless has not been discussed in previous studies. Therefore, this present work provides an analysis framework that formulates the impact of mobility on a blockchain system’s performance in a VANET based on three key metrics: (i) the probability of a successful addition of block to the chain, (ii) the stability of a rendezvous, and (iii) the number of blocks exchanged during a rendezvous. Closed-form expressions and numerical results display the performance of a blockchain system in various scenarios in a VANET.
19 April 2022 in IEEE Transactions on Intelligent Vehicles
Blockchain has been forming the central piece of various types of vehicle-to-everything (V2X) network for trusted data exchange. Recently, permissioned blockchains garner particular attention thanks to their improved scalability and diverse needs from different organizations. One representative example of permissioned blockchain is Hyperledger Fabric (Fabric). Due to its unique execute-order procedure, there is a critical need for a client to select an optimal number of peers. The interesting problem that this paper targets to address is the tradeoff in the number of peers: a too large number will degrade scalability while a too small number will make the network vulnerable to faulty nodes. This optimization issue gets especially challenging in V2X networks due to mobility of nodes: a transaction must be executed, and the associated block must be committed before the vehicle leaves a network. To this end, this paper proposes a mechanism for selecting an optimal set of peers based on reinforcement learning (RL) to keep a Fabric-empowered V2X network impervious to dynamicity due to mobility. We model the RL as a contextual multi-armed bandit (MAB) problem. The results demonstrate the outperformance of the proposed scheme.
Abstract—The fifth-generation wireless (5G) has already started showing its capability to achieve extremely fast data transfer, which makes itself considered to be a promising mobile technology. However, concerns have been raised on adverse health impacts that human users can experience in a 5G system by being exposed to electromagnetic fields (EMFs). This article investigates the human EMF exposure in a 5G system and compare to those measured in the previous-generation cellular systems. It suggests a minimum separation distance between a transmitter and a human user for keeping the EMF exposure below the safety regulation level, which provides consumers with a general understanding on the safe use of 5G communications.
There is an urgent need to support high data rate among connected vehicles for both safety and infotainment purposes. However, high rate for vehicular communications is impacted by several challenges such as optimal beam tracking for multiple simultaneous-transmitting vehicles in highly-dynamic environments. In this paper, we aim to maximize the overall network throughput for multi-vehicular communications. We propose a reinforcement learning (RL) approach called combinatorial multi-armed bandit (CMAB) framework, where multiple arms (i.e., actions) form a super arm and can be played together, to handle the beam selection problem in a vehicular network. More specifically, we propose an adaptive combinatorial Thompson sampling algorithm, namely adaptive CTS, that CMAB embodies for appropriate selection of simultaneous beams in a high-mobility vehicular environment. The proposed approach applies the smart exploration-exploitation trade-off for the fast selection of beams. As the proposed adaptive CTS scheme produces a higher complexity over the search space which increases exponentially with the number of user, we also propose a sequential Thompson sampling (TS) algorithm where beam selection is performed in a one-by-one manner. We analyze the regret bounds for the proposed beam tracking algorithms. The performance of the proposed strategies are evaluated for multi-vehicle millimeter-wave (mmWave) simulation environments. Our results suggest that the proposed sequential approach performs almost similar to the simultaneous adaptive CTS scheme for tracking optimal beams in a multi-vehicular network with much reduced complexity. Simulation results also show that both of our proposed strategies approach the optimal achievable rate achieved by the genie-aided solution.
Dedicated short-range communications (DSRC) is one of the key technologies enabling safety-critical applications for intelligent transportation system (ITS). Considering the significance of such safety-of-life applications, it is of utmost importance to guarantee reliable delivery of basic safety messages (BSMs). However, in accordance with a V2X network being inherently dynamic in key aspects such as vehicle density and velocity, the networking behavior of a DSRC system is usually highly complicated to analyze. In addition, the United States Federal Communications Commission (US FCC) recently proposed the so-called “5.9 GHz band innovation”, which includes a plan to reduce bandwidth for DSRC to 10 MHz at best from 75 MHz. Motivated from these challenges, the necessity of “lightening” load of a DSRC network has become essential to keep safety-related operations from performance deterioration. To this end, this paper proposes a protocol that prioritizes transmission of a BSM from a vehicle according to the level of accident risk of the vehicle. The proposed protocol uses the distance of a vehicle from a danger source as the metric to determine the priority for transmission. Our results show that this protocol effectively prioritizes the transmission opportunity for dangerous vehicles, and hence results in higher performance in terms of key metrics–i.e., average latency, packet delivery rate (PDR), and inter-reception time (IRT).