Fused filament fabrication (FFF) has numerous process parameters that influence the mechanical strength of parts. Hence, many optimization studies are performed using conventional tools and algorithms. Although studies have also been performed using advanced algorithms, limited research has been reported in which variants of the naked mole-rat algorithm (NMRA) are implemented for solving the optimization issues of manufacturing processes. This study was performed to scrutinize optimum parameters and their levels to attain maximum impact strength, flexural strength and tensile strength based on five different FFF process parameters. The algorithm yielded better results than other studies and successfully achieved a maximum response, which may be helpful to enhance the mechanical strength of FFF parts. The study opens a plethora of research prospects for implementing NMRA in manufacturing. Moreover, the findings may help identify critical parametric levels for the fabrication of customized products at the commercial level and help to attain the objectives of Industry 4.0.
In this study, an attempt was made to utilize waste products from industries to develop composite materials. In the present study, car scrap aluminium alloy wheels (SAAWs) was used as matrix material. Waste rice husk ash (RHA) was collected from a rice mill to utilize as a primary reinforcement material. Spent alumina catalyst (SAC) waste was used as a secondary reinforcement material. SAC was collected from the oil refinery industry. These wastes produced lots of soil and air pollution. However, by utilizing these wastes, some environment pollutions can be reduced. Car scrap aluminium alloy wheels (SAAWs) based composite material was developed using RHA as primary reinforcement material and SAC as a secondary reinforcement material by stir casting technique followed by squeeze pressure on the universal testing machine (UTM) in mushy zone. Microstructure behaviour shows a uniform distribution of RHA and SAC in a recycled aluminium alloy matrix. Mechanical properties such as hardness, ductility, compressive strength and tensile strength were improved using RHA and SAC as reinforcement material simultaneously in SAAWs matrix material. Thermal expansion behaviour, soil degradation test and corrosion loss were also observed to see the effect of agro-waste RHA and SAC in recycled aluminium alloy.