In this paper, wideband radar cross-section (RCS) reduction on checkerboard metasurfaces with dual resonance and surface wave suppression is proposed. In addition to dual resonance, the surface wave suppression of the unit cells is applied to extend the -10 dB RCS reduction bandwidth limit of the upper frequency band which is generated by the surface wave. As a results, the proposed structure provides that the high frequency of the -10 dB RCS reduction is enhanced from 14.9 GHz to 16.32 GHz. Fabricated checkerboard metasurfaces are shown, and simulation and measurement results are presented in this paper.
30 March 2021 in IEEE Antennas and Wireless Propagation Letters
An S-/Ka-band shared-aperture antenna with frequency switching function for 5G applications is proposed in this letter. The proposed antenna comprises a thick patch containing a slotted cavity array (TPCSCA), S-band feeding structure, and coaxial cables for Ka-band. The TPCSCA is designed using 16 Ka-band slotted cavity antennas inside an S-band thick patch. Half of these Ka-band antenna elements radiate a +45° slanted polarization wave, whereas the others radiate a -45° SP wave. These elements are arranged in the form of a checkerboard and fed by coaxial cables. The S-band feeding structure is designed as a microstrip-fed slot and operates the TPCSCA as a TM 010 mode patch antenna in S-band. The measurement results show realized gains of 4.06-5.35 and 12.0-14.5 dBi over the S-band (3.44-3.56 GHz) and the Ka-band (27.54-28.46 GHz), respectively. The -3 dB beam steering coverage for the Ka-band is more than ±40° for both polarizations.
A single‐layer reflectarray with a combination of element types is proposed. Three element types—square patch, square ring and ring‐loaded patch (RLP)—are used together to design the reflectarray by compensating for the drawbacks of one type by the others. The gain of the proposed reflectarray is 29.1 dBi, which is 1.9 dB higher than that of the reference reflectarray that was designed with only the RLP.
1 September 2005 in Microwave and Optical Technology Letters
A reflectarray with square ring (SR) elements that are designed to reduce the reflection phase sensitivity on a thin substrate is proposed. Generally, the SR element is designed with a fixed ring width, or a fixed ratio between the ring width and the outer length of the ring. However, it is difficult to obtain both a reflection phase range close to 360° and sufficiently low phase sensitivity simultaneously with the conventional methods. Thus, a modified design method to reduce the phase sensitivity without sacrificing the phase range by introducing two procedures (changing the outer and inner lengths of the ring in opposite directions, and changing the inner length while fixing the outer length) is proposed to design a reflectarray on a 0.039λ 0 thick substrate at 15 GHz. The radiation characteristics of the reflectarray designed with the proposed method are compared to those of the conventionally designed SR element reflectarray, and gain enhancement of 2.2 dB is achieved at 15 GHz.
A reflectarray element using a conductor cell with variable height is proposed. It is found that the reflection phase can be tuned by adjusting the height of the conductor cells arranged on the spatially discretised reflector plane. A complete linearised reflection phase thus can be achieved when the proposed conductor cell is used as a unit element. A millimetre‐wave antenna has been designed using the proposed method and it shows 50% aperture efficiency with a half‐wavelength cell height variation.