CMOS active pixel sensors (APS) have performance competitive with charge-coupled device (CCD) technology, and offer advantages in on-chip functionality, system power reduction, cost, and miniaturization. This paper discusses the requirements for CMOS image sensors and their historical development, CMOS devices and circuits for pixels, analog signal chain, and on-chip analog-to-digital conversion are reviewed and discussed.
17 February 2014 in IEEE Journal of the Electron Devices Society
The pinned photodiode is the primary photodetector structure used in most CCD and CMOS image sensors. This paper reviews the development, physics, and technology of the pinned photodiode.
Charge-coupled devices (CCDs) are presently the technology of choice for most imaging applications. In the 23 years since their invention in 1970, they have evolved to a sophisticated level of performance. However, as with all technologies, we can be certain that they will be supplanted someday. In this paper, the Active Pixel Sensor (APS) technology is explored as a possible successor to the CCD. An active pixel is defined as a detector array technology that has at least one active transistor within the pixel unit cell. The APS eliminates the need for nearly perfect charge transfer--the Achilles' heel of CCDs. This perfect charge transfer makes CCD's radiation 'soft,' difficult to use under low light conditions, difficult to manufacture in large array sizes, difficult to integrate with on-chip electronics, difficult to use at low temperatures, difficult to use at high frame rates, and difficult to manufacture in non-silicon materials that extend wavelength response. With the active pixel, the signal is driven from the pixel over metallic wires rather than being physically transported in the semiconductor. This paper makes a case for the development of APS technology. The state of the art is reviewed and the application of APS technology to future space-based scientific sensor systems is addressed.
1 March 1994 in IEEE Transactions on Electron Devices
The Quanta Image Sensor (QIS) was conceived when contemplating shrinking pixel sizes and storage capacities, and the steady increase in digital processing power. In the single-bit QIS, the output of each field is a binary bit plane, where each bit represents the presence or absence of at least one photoelectron in a photodetector. A series of bit planes is generated through high-speed readout, and a kernel or “cubicle” of bits (x, y, t) is used to create a single output image pixel. The size of the cubicle can be adjusted post-acquisition to optimize image quality. The specialized sub-diffraction-limit photodetectors in the QIS are referred to as “jots” and a QIS may have a gigajot or more, read out at 1000 fps, for a data rate exceeding 1 Tb/s. Basically, we are trying to count photons as they arrive at the sensor. This paper reviews the QIS concept and its imaging characteristics. Recent progress towards realizing the QIS for commercial and scientific purposes is discussed. This includes implementation of a pump-gate jot device in a 65 nm CIS BSI process yielding read noise as low as 0.22 e− r.m.s. and conversion gain as high as 420 µV/e−, power efficient readout electronics, currently as low as 0.4 pJ/b in the same process, creating high dynamic range images from jot data, and understanding the imaging characteristics of single-bit and multi-bit QIS devices. The QIS represents a possible major paradigm shift in image capture.
30 September 2013 in IEEE Journal of the Electron Devices Society
Imaging performance metrics of single-bit and multi-bit photo-electron-counting quanta image sensors (QIS) are analyzed using Poisson arrival statistics. Signal and noise as a function of exposure are determined. The D-log H characteristic of single-bit sensors including overexposure latitude is quantified. Linearity and dynamic range are also investigated. Read-noise-induced bit-error rate is analyzed and a read-noise target of less than 0.15 e-rms is suggested.