A compact unbalanced two-way filtering power splitter with an integrated Chebyshev filtering function is presented. The design is purely based on formulations, thereby eliminating the constant need for developing complex optimization algorithms and tuning, to deliver the desired amount of power at each of the two output ports. To achieve miniaturization, a common square open-loop resonator (SOLR) is used to distribute energy between the two integrated channel filters. In addition to distributing energy, the common resonator also contributes one pole to each integrated channel filter, hence, reducing the number of individual resonating elements used in achieving the integrated filtering power splitter (FPS). To demonstrate the proposed design technique, a prototype FPS centered at 2.6 GHz with a 3 dB fractional bandwidth of 3% is designed and simulated. The circuit model and layout results show good performances of high selectivity, less than 1.7 dB insertion loss, and better than 16 dB in-band return loss. The common microstrip SOLR and the microstrip hair-pin resonators used in implementing the proposed integrated FPS ensures that an overall compact size of 0.34 λg × 0.11 λg was achieved, where λg is the guided-wavelength of the 50 Ω microstrip line at the fundamental resonant frequency of the FPS passband.
Transformerless inverters (TIs) are becoming increasingly popular in solar photovoltaic (PV) applications due to their enhanced efficiency and cost-effectiveness. Unlike transformer-based inverters, TIs, which lack transformers and additional components, offer significant advantages in terms of reduced weight, compactness, and lower costs. Research studies have demonstrated that multilevel TIs can achieve lower total harmonic distortion (THD), reduced switching stresses, and higher AC output voltage levels suitable for high voltage applications. However, achieving these outcomes simultaneously with maximum power ratings and the lowest switching frequencies poses a challenge for TI topologies. In light of these challenges, this research proposes the implementation of a 13-level single-source switched-capacitor boost multilevel inverter (SSCBMLI) designed for solar PV systems. The SSCBMLI consists of a single DC power source, switched-capacitor (SC) units, and a full H-bridge. Compared to other existing 13-level multilevel inverter (MLI) configurations, the proposed SSCBMLI utilizes the fewest components to minimize development costs. Moreover, the SSCBMLI offers voltage boosting and can drive high inductive loads, self-voltage-balanced capacitors, an adaptable topology structure, and reliable system performance. Simulations and experimental tests are conducted using PLECS 4.5 and SIMULINK to assess the performance of the proposed SSCBMLI under varying modulation indices, source powers, and loads. A comparative analysis is then conducted to evaluate the SSCBMLI against existing inverter topologies.