Industrial hemp (Cannabis sativa) is one of the most available and widely produced bast fibers with high cellulose content. Interest in these fibers is warranted due to environmental protection challenges as well as their inherent properties such as low density, high specific strength, and stiffness. In addition, advanced research and progress have gone into increasing their mechanical performance through surface treatments and in the development of new materials. The most promising application for hemp fibers is as reinforcement in polymeric composites or through hybridization. Nonetheless, more research is needed to improve their properties and expand their range of applications. The biodegradability issue is one problem that must be addressed when considering long life-cycle applications as the reproducibility of these composites’ final properties. This review is a comprehensive literature review on hemp fibers. It includes hemp fibers’ chemical and mechanical properties, surface modifications, hybrid composites, as well as current and future applications.
An exhaustive and integrative overview of recent developments in 3D and 4D textiles based on Additive Manufacturing (AM) were provided in order to identify the current state‐of‐the‐art. Despite all scientific progress, AM applied on textiles is a challenging technique and is still at an embryonic stage of research and technological development (R&TD), mainly due to the technological gap between featured prototypes and scalability in manufacturing. Despite its full potential across a range of different applications, such as development of functional filament fibres/wires, 3D printing on textiles, 3D printing completed garments and 4D textiles, needs future developments. Although, AM applied on textiles, enables cost and resource efficiency for small scale production through localised production, shorten supply chain and demand driven manufacture, both customisable and scalable, embracing cost and environmental sustainability. The opportunities and limits of 3D and 4D printing textiles are also discussed. Finally, the conclusion highlights the potential future development and application of the convergence of advanced computational design techniques, product customization, mathematical modelling, simulation, and digital modelling within multifunctional textiles. Graphical Abstract
The effects of maleic anhydride, stearic acid and water absorption on the physical and flexural properties of injection moulded short hemp fiber-reinforced thermoplastic composites were investigated, in order to understand the suitability of these materials for outdoor applications. The water absorption, diffusion mechanisms and kinetics of composites were evaluated by immersing the specimens in distilled water at 23 °C. Flexural fracture surface morphologies were investigated in order to compare the results of flexural tests with qualitative morphological observations. The process of water absorption was found to follow the Fickian mode of diffusion. Flexural properties ( and ) were affected by the water absorption. The addition of maleic anhydride and stearic acid enhanced the resistance to water absorption of composites and resulted in a slight increase of flexural properties of composites based on a high-density polyethylene (HDPE) matrix. The reduction in flexural properties induced by the degradation of matrix-fiber interfacial bonding due to water absorbed was confirmed by scanning electron microscopy analysis.