Nonstationarity in electromagnetic data affects the computation of Fourier spectra and therefore the traditional estimation of the magnetotelluric (MT) transfer functions (TF). We provide a TF estimation scheme based on an emerging nonlinear, nonstationary time series analysis tool, called empirical mode decomposition (EMD) and show that this technique can handle nonstationary effects with which traditional methods encounter difficulties. In contrast to previous works that employ EMD for MT data processing, we argue the advantages of a multivariate decomposition, highlight the possibility to use instantaneous parameters, and define the homogenization of frequency discrepancies between data channels. Our scheme uses the robust statistical estimation of transfer functions based on robust principal component analysis and a robust iteratively reweighted least squares regression with a Huber weight function. The scheme can be applied with and without aid of any number of available remote reference stations. Uncertainties are estimated by iterating the complete robust regression, including the robust weight computation, with a bootstrap routine. We apply our scheme to synthetic and real data (Southern Africa) with and without nonstationary character and compare different processing techniques to the one presented here. As a conclusion, nonstationary noise can heavily affect Fourier‐based MT data processing but the presented nonstationary approach is nonetheless able to extract the impedances.
Geomagnetically induced currents (GIC) driven by geoelectric fields pose a hazard to ground-based infrastructure, such as power grids and pipelines. Here, a new method is presented for modelling geoelectric fields in near real time, to provide valuable information to help mitigate the impact of GIC. The method uses magnetic field measurements from the Magnetometer Network of Ireland (MagIE; https://www.magie.ie), interpolates the geomagnetic field variations between magnetometers using spherical elementary current systems (SECS), and estimates the local electric field using a high-density (< 40 km) network of magnetotelluric transfer functions (MT-TF) encompassing the island. The model was optimised to work in near real time, with a correction curve applied to the geoelectric field time series. This approach was successfully validated with measured electric fields at four sites for a number of geomagnetic storms, providing accurate electric fields up to a 1-minute delay from real time, with high coherence (0.70 – 0.85) and signal-to-noise ratio (SNR; 3.2 – 6.5) relative to measured electric field validation time series. This was comparable to a standard non-real-time geoelectric field model (coherence = 0.80 − 0.89 and SNR = 4.0 − 7.0). The impact of galvanic distortion on the model was also briefly evaluated, with a galvanic distortion correction leading to a more homogeneous representation of the direction of the electric field, at a regional scale.
The capacitive resistivity (CR) method is a time‐ and labor‐saving alternative to traditional direct current (DC) resistivity methods. The line electrode variant of CR suffers from the absence of data inversion programs as available for the DC resistivity method. Direct current inversion programs were applied to determine the resistivity distribution from CR measurements using an approximately equivalent four‐point dipole–dipole configuration. We optimized configurations to minimize the systematic error applying DC inversion programs to CR, using data based on the comparison of the two‐dimensional sensitivities of the proposed DC approximations. The optimal four‐point dipole–dipole geometry has a dipole length of 80%.
The Horizontal-to-Vertical Spectral Ratio (HVSR) of ambient vibration measurements is a common tool to explore near surface shear wave velocity (Vs) structure. HVSR is often applied for earthquake risk assessments and civil engineering projects. Ambient vibration signal originates from the combination of a multitude of natural and man-made sources. Ambient vibration sources can be any ground motion inducing phenomena, e.g., ocean waves, wind, industrial activity or road traffic, where each source does not need to be strictly stationary even during short times. Typically, the Fast Fourier Transform (FFT) is applied to obtain spectral information from the measured time series in order to estimate the HVSR, even though possible non-stationarity may bias the spectra and HVSR estimates. This problem can be alleviated by employing the Hilbert–Huang Transform (HHT) instead of FFT. Comparing 1D inversion results for FFT and HHT-based HVSR estimates from data measured at a well studied, urban, permanent station, we find that HHT-based inversion models may yield a lower data misfit by up to a factor of 25, a more appropriate Vs model according to available well-log lithology, and higher confidence in the achieved model.
The introduction of the phase tensor marked a breakthrough in the understanding and analysis of electric galvanic distortion effects. It has been used for (distortion-free) dimensionality analysis, distortion analysis, mapping, and subsurface model inversion. However, the phase tensor can only represent half of the information contained in a complete impedance data set. Nevertheless, to avoid uncertainty due to galvanic distortion effects, practitioners often choose to discard half of the measured data and concentrate interpretation efforts on the phase tensor part. Our work assesses the information loss due to pure phase tensor interpretation of a complete impedance data set. To achieve this, a new MT impedance tensor decomposition into the known phase tensor and a newly defined amplitude tensor is motivated and established. In addition, the existence and uniqueness of the amplitude tensor is proven. Synthetic data are used to illustrate the amplitude tensor information content compared with the phase tensor. Although the phase tensor only describes the inductive effects within the subsurface, the amplitude tensor holds information about inductive and galvanic effects that can help to identify conductivity or thickness of (conductive) anomalies more accurately than the phase tensor. Furthermore, the amplitude and phase tensors sense anomalies at different periods, and thus the combination of both provides a means to evaluate and differentiate anomaly top depths in the event of data unavailability at extended period ranges, e.g., due to severe noise.