Yanhong Wang

Dr. Yanhong Wang

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 September 2021 in Scientific Reports
Verified
Journal Article
Open access
PDF file
JWJingran Wang
Jingran Wang
DYDanyang Yu
Danyang Yu
YWYanhong Wang
Yanhong Wang
XDXueli Du
Xueli Du
GLGuochen Li
Guochen Li
SXShuang Xu
Shuang Xu
In this study, the contents of heavy metals and Cd and Pb isotope ratios of agricultural soil and potential source samples collected from farmland receiving sewage irrigation in Wuqing District, Tianjin, China were determined. Multiple methods were used for source analysis, including positive matrix factorization (PMF), correlation analysis, principal component analysis (PCA), and the Cd and Pb isotope ratio method. The results showed that agricultural soil was slightly contaminated by heavy metals in the research area, with relatively higher Cd and Pb accumulation levels compared to those of other heavy metals. Four types of pollution sources, including the soil parent material sources, industrial emission sources, agricultural practice sources, and mixed sources of sewage irrigation and transportation were apportioned and quantified by PMF, combined with the results of PCA and correlation analysis. The contribution rates quantified by the Cd and Pb isotope ratio method were similar, suggesting that no single source dominates Pb and Cd pollution. The contribution rates of Pb analyzed by the isotope ratio method were almost identical to those of the PMF model, indicating the rationality of the PMF result. Our results suggested that correlation analysis and PCA should be utilized to provide information for obtaining reasonable results and defining source categories for PMF, whereas the isotope ratio method should be applied to verify the accuracy of source contributions analyzed by PMF.

8 June 2021 in Sustainability
Verified
Journal Article
Open access
PDF file
DYDanyang Yu
Danyang Yu
JWJingran Wang
Jingran Wang
YWYanhong Wang
Yanhong Wang
XDXueli Du
Xueli Du
GLGuochen Li
Guochen Li
BLBo Li
Bo Li
In this study, the agricultural soil around Zhuzhou Smelter in Zhuzhou district, Hunan, China and Huludao Zinc Plant in Huludao district, Liaoning, China was selected as the research area to discuss the current situation of heavy metal pollution in the surrounding agricultural soil caused by different smelting plants for soil environmental management and sustainable development of soil resources. Eight elements’ (Cd, Pb, As, Hg, Cr, Ni, Cu, and Zn) contents were measured to assess their pollution risk level and spatial distribution distinction. Correlation analysis, the positive matrix factorization (PMF), and Pb isotope ratio method were employed to analyze the sources of soil heavy metal pollution in the research area. The contents of Cd, Pb, Hg, and Zn in the soil of the two research areas were seriously polluted, and the changes of their spatial content were related to the migration and sedimentation of the smelter waste gas. Four types of pollution sources, including the smelting source, agricultural sources, natural sources, and mixed sources of industrial activity and traffic were identified in both areas by PMF, and the contribution rates of the four pollution sources in both areas were similar. Taking the agricultural soil around Huludao Zinc Plant as an example, the contribution rates of the different pollution sources analyzed by Pb isotope ratio method were the lead smelting source (43.7%), followed by the agricultural source (34.6%), traffic source (14.2%), and natural source (7.5%), which were basically consistent with that of PMF analysis, verifying the reliability of the two methods. The results above showed that the smelters were the main cause of heavy metal pollution in agricultural soils around the two research areas, and the analysis results of element content ratio and smelting source characteristic element contribution rate ratio could provide reference for the analysis of heavy metal pollution in agricultural soil around smelters for soil pollution control decision making.

10 August 2017 in Analytical Sciences
Verified
Journal Article
Open access
PDF file
QZQiang Zhou
Qiang Zhou
CLChengcheng Liu
Chengcheng Liu
HZHong Zhang
Hong Zhang
CZChunjie Zhao
Chunjie Zhao
YWYanhong Wang
Yanhong Wang
In this paper, quantum dot (QD)-based molecularly imprinted polymer (MIP) was fabricated and successfully utilized as a fluorescent probe for highly selective and sensitive detection of carbofuran in water samples. The MIPs were synthesized followed by a multi-step swelling and polymerization method, and then labeled with CdSe/ZnS QDs via gradual solvent evaporation. Then the prepared QDs-MIP microspheres were introduced to flow cytometry by virtue of their good dispersibility in water, and fast adsorption and desorption. Under optimized conditions, the fluorescence intensity of QDs-MIP decreased linearly with the increasing of carbofuran in the concentration range of 1 - 20 μg L-1 (R2 > 0.99) and it can detect down to 0.2 μg L-1 of carbofuran. This method was simple, selective and applied successfully to the optosensing of trace carbofuran in water samples with good recoveries ranging from 94.1 ± 3.7 to 98.4 ± 4.5%.

19 December 2017 in Analytical Letters
Verified
Journal Article
Closed access
HZHong Zhang
Hong Zhang
PWPingmei Wang
Pingmei Wang
QZQiang Zhou
Qiang Zhou
YWYanhong Wang
Yanhong Wang
Uniform-sized fluorescent molecularly imprinted polymers were prepared by one-step swelling and suspension polymerization, while chlorpyrifos, methacrylic acid, ethylene glycol dimethacrylate, and oil-soluble CdSe/ZnS quantum dots were used as the carrier, template molecule, functional monomer, cross-linker, and fluorophor, respectively. The morphology, adsorption dynamics, binding ability, and selectivity of quantum dot-labeled molecularly imprinted polymers were evaluated. The dosage of quantum dots for labeling the molecularly imprinted polymers was optimized. The results showed that the optimized dose of quantum dots was 200 µL using a concentration of 8.0 µM. The microsphere size was approximately 10 µm with a honeycombed surface. The quantum dot-labeled molecularly imprinted polymers had an even brightness and a high selectivity. In the presence of different concentrations of chlorpyrifos, a decrease in the fluorescence intensity of the quantum dot-labeled molecularly imprinted polymer was clearly identified by flow cytometry. The whole detection process was accomplished within 2 h including pretreatment. This method was used for the determination of chlorpyrifos in tap water samples.

7 November 2025 in Antioxidants
Verified
Journal Article
Open access
PDF file
KJKunzhe Jiang
Kunzhe Jiang
JWJingran Wang
Jingran Wang
WYWang Yang
Wang Yang
Ying XiongYing Xiong
Ying Xiong
MCMeiling Chen
Meiling Chen
YWYanhong Wang
Yanhong Wang
This study investigates the antioxidant properties of aucubin (AU), an iridoid compound, focusing on its ability to scavenge hydroxyl radicals (•OH) through its hydroxyl functional groups. Gaussian software was employed to model and validate the underlying antioxidant reaction mechanisms. Three primary pathways were examined: hydrogen atom transfer (HAT), sequential electron transfer-proton transfer (SET-PT), and sequential proton loss–electron transfer (SPLET). All calculations were performed using the M06-2X functional within density functional theory (DFT) at the def2-TZVP level, incorporating Grimme’s D3 dispersion correction and the implicit solvation model based on solute electron density (SMD) for water. Various thermodynamic parameters were determined to analyze and compare the antioxidant reactions, including the O-H bond dissociation energy (BDE), ionization potential (IP), proton dissociation enthalpy (PDE), electron transfer enthalpy (ETE), and proton affinity (PA) of the hydroxy groups. The results indicated that the HAT mechanism is the dominant pathway in the scavenging of •OH radicals by AU. The key active sites were identified as the 6-OH group in the aglycone structure and the 6′-OH group in the sugar moiety. Moreover, the polar aqueous environment promoted O-H bond homolysis to enhance the antioxidant activity.

7 May 2025 in Membranes
Verified
Journal Article
Open access
PDF file
QZQiang Zhou
Qiang Zhou
MCMeiling Chen
Meiling Chen
YJYushan Jiang
Yushan Jiang
LZLinnan Zhang
Linnan Zhang
YWYanhong Wang
Yanhong Wang
This study successfully developed a novel molecularly imprinted ultrafiltration membrane (MIUM) for energy-efficient and selective removal of dibutyl phthalate (DBP) from wastewater. Guided by Gaussian simulations, methacrylic acid (MAA) was identified as the optimal functional monomer, achieving the strongest binding energy (ΔE = −0.0698 a.u.) with DBP at a 1:6 molar ratio, providing a foundation for precise cavity construction. DBP-imprinted polymers (MIPs) synthesized via bulk polymerization were integrated into polysulfone membranes through phase inversion. The optimized MIUM (81.27% polymer content) exhibited exceptional performance under low-pressure operation (0.2 MPa), with a water flux of 111.49 L·m2·h−1 and 92.87% DBP rejection, representing a 43% energy saving compared to conventional nanofiber membranes requiring 0.4 MPa. Structural characterization confirmed synergistic effects between imprinted cavities and membrane transport properties as the key mechanism for efficient separation. Notably, MIUM demonstrated remarkable selectivity, achieving 91.57% retention for DBP while showing limited affinity for structurally analogous phthalates (e.g., diethyl/diisononyl phthalates). The membrane maintained > 70% retention after 10 elution cycles, highlighting robust reusability. These findings establish a paradigm for molecular simulation-guided design of selective membranes, offering an innovative solution for low-energy removal of endocrine disruptors. The work advances wastewater treatment technologies by balancing high permeability, targeted pollutant removal, and operational sustainability, with direct implications for mitigating environmental risks and improving water quality management.