A kinetic study of Hg(II) transport from an aqueous donor solution into an aqueous acceptor solution through a liquid membrane containing 25,26,27–tribenzoyloxy‐28‐hydroxy‐5,11,17,23‐tetra‐(4‐n‐butylphenylazo)calix[4]arene 1 as a carrier was studied. The kinetic parameters (k1, k2, Rmmax, tmax, Jdmax, Jamax) for the transport were investigated in terms of the effect of temperature, the stirring rate, the carrier concentration, and the type of solvent. The kinetics of transport was analyzed in the formalism of two consecutive irreversible first‐order reactions. The membrane entrance rate, and exit rate constants were increased with increasing of temperature stirring rate, and carrier concentration. The membrane entrance rate and exit rate constants depended on the type of solvent and was found to be in order of CH2Cl2> CHCl3> CCl4. The activation energy values are calculated as 30.67±2.64 and 57.33±4.90 kj mol−1 for extraction and reextraction, respectively. The values of calculated activation energy indicate that the process is diffusionally controlled by species.
1 January 2019 in Chinese Journal of Chemical Engineering
In this article, calix[4]arene ketone derivative was used as a carrier to transport Hg2+ ions from an aqueous solution into an aqueous receiving solution. The kinetic parameters (k 1, k 2, R m max, t max, J d max, J a max) were investigated with influence of temperature, the solvent, and stirring rate and analyzed in the formation of two consecutive, irreversible first order reactions. The membrane entrance rate, k 1, and the membrane exit rate, k 2, constants were increased with temperature and stirring rate and found to be dependent on the solvent type in the order CH2Cl2 > CHCl3 > CCl4. The activation energy was obtained as 5.28 kcal/mol from the slope of the Arrhenius plot for the case of maximum membrane exit flux, J a max. This value indicates that the process is controlled by species diffusion.