In this work the purely electro-osmotic flow of a viscoelastic liquid, which obeys the simplified Phan-Thien–Tanner (sPTT) constitutive equation, is solved numerically and asymptotically by using the lubrication approximation. The analysis includes Joule heating effects caused by an imposed electric field, where the viscosity function, relaxation time and electrical conductivity of the liquid are assumed to be temperature-dependent. Owing to Joule heating effects, temperature gradients in the liquid make the fluid properties change within the microchannel, altering the electric potential and flow fields. A consequence of the above is the appearance of an induced pressure gradient along the microchannel, which in turn modifies the normal plug-like electro-osmotic velocity profiles. In addition, it is pointed out that, depending on the fluid rheology and the used values of the dimensionless parameters, the velocity, temperature and pressure profiles in the fluid are substantially modified. Also, the finite thermal conductivity of the microchannel wall was considered in the analysis. The dimensionless temperature profiles in the fluid and the microchannel wall are obtained as function of the dimensionless parameters involved in the analysis, and the interactions between the coupled momentum, thermal energy and potential electric equations are examined in detail. A comparison between the numerical predictions and the asymptotic solutions was made, and reasonable agreement was found.
The dispersion coefficient of a passive solute in a steady-state pure electro-osmotic flow (EOF) of a viscoelastic liquid, whose rheological behaviour follows the simplified Phan-Thien–Tanner (sPTT) model, along a parallel flat plate microchannel, is studied. The walls of the microchannel are assumed to have modulated and low $\unicode[STIX]{x1D701}$ potentials, which vary slowly in the axial direction in a sinusoidal manner. The flow field required to obtain the dispersion coefficient was solved using the lubrication approximation theory (LAT). The solution of the electric potential is based on the Debye–Hückel approximation for a symmetric $(z:z)$ electrolyte. The viscoelasticity of the fluid is observed to notably amplify the axial distribution of the effective dispersion coefficients due to the variation in the $\unicode[STIX]{x1D701}$ potentials of the walls. The problem was formulated for two cases: when the Debye layer thickness (EDL) was on the order of unity (thick EDL) and in the limit where the thickness of the EDL was very small compared with the height of the microchannel (thin EDL limit). Due to the coupling between the nonlinear governing equations and the sPTT fluid model, they were replaced by their approximate linearized forms and solved in the limit of $\unicode[STIX]{x1D700}\ll 1$ using the regular perturbation technique. Here $\unicode[STIX]{x1D700}$ is the amplitude of the sinusoidal function of the $\unicode[STIX]{x1D701}$ potentials. Additionally, the numerical solution of the simplified governing equations was also obtained for $\unicode[STIX]{x1D700}=O(1)$ and compared with the approximate solution, showing excellent agreement for $0\leqslant \unicode[STIX]{x1D700}\leqslant 0.3$ . Note that the dispersion coefficient primarily depends on the Deborah number, on the ratio of the half-height of the microchannel to the Debye length, and on the assumed variation in the $\unicode[STIX]{x1D701}$ potentials of the walls.
In this work, we carry out a theoretical analysis of the mass transport rate through a long microcapillary, with a reactive wall, connecting two reservoirs with different concentrations of some electro-neutral solute, caused by an oscillatory electroosmotic flow of a Jeffreys fluid. The mass transport enhancement relative to that caused only by molecular diffusion is found to be a function of the following dimensionless parameters: the angular Reynolds number Rω; the Deborah numbers De1 and De2, associated with the relaxation and retardation times, respectively; the Schmidt number Sc; the Damköhler number Da; the partition number ; the tidal displacement ΔZ; and the ratio between the radius of the microcapillary and the Debye length . We find that for a viscoelastic fluid, there exists a resonant behavior of the mass transfer rate when the angular Reynolds number assumes specific values. In this context, we evidence that the interaction between the fluid elasticity and the oscillatory character of the flow enhances the mass transfer rate up to several orders of magnitude compared with that caused by an oscillatory electroosmotic flow of a Newtonian fluid. We also found that the microcapillary wall’s reactive characteristics, manifested through the Damköhler number and the dimensionless partitioning coefficient, could enhance or diminish the mass transfer rate depending on the interplay of the other dimensionless parameters involved in the analysis.
1 August 2011 in International Journal of Heat and Mass Transfer
The hydrodynamic dispersion of a neutral solute released into a pulsatile electro-osmotic flow in a microcapillary that is affected by slippage at the wall (modeled by the Navier slip condition) is studied theoretically. The long-time Taylor dispersion is analytically derived using the homogenization method with multiple scales. The results indicate that the effective dispersion coefficient depends on a dimensionless slip length, an angular Reynolds number, the amplitude of the oscillatory component of the external electric field, and an electrokinetic parameter that relates the radius of the microcapillary with the Debye length. Our results suggest that in the presence of the Navier slip condition, the dispersivity is maximized by up to two orders of magnitude compared with that obtained through the classical no-slip condition.