Glasshouse and field studies showed that Vetiver grass can produce high biomass (>100t/tha⁻¹ year⁻¹) and highly tolerate extreme climatic variation such as prolonged drought, flood, submergence and temperatures (−15°–55°C), soils high in acidity and alkalinity (pH 3.3–9.5), high levels of Al (85% saturation percentage), Mn (578 mg kg⁻¹), soil salinity (ECse 47.5 dS m⁻¹), sodicity (ESP 48%), and a wide range of heavy metals (As, Cd, Cr, Cu, Hg, Ni, Pb, Se, and Zn). Vetiver can accumulate heavy metals, particularly lead (shoot 0.4% and root 1%) and zinc (shoot and root 1%). The majority of heavy metals are accumulated in roots thus suitable for phytostabilization, and for phytoextraction with addition of chelating agents. Vetiver can also absorb and promote biodegradation of organic wastes (2,4,6-trinitroluene, phenol, ethidium bromide, benzo[a]pyrene, atrazine). Although Vetiver is not as effective as some other species in heavy metal accumulation, very few plants in the literature have a wide range of tolerance to extremely adverse conditions of climate and growing medium (soil, sand, and tailings) combined into one plant as vetiver. All these special characteristics make vetiver a choice plant for phytoremediation of heavy metals and organic wastes.

The three most common methods of sterilization in use today are ethylene oxide exposure, γ-irradiation, and steam sterilization. Each of these methods has serious limitations for the sterilization of some materials used in medicine, especially thermally and hydrolytically sensitive polymers by themselves and in combination with proteins. In this work, we demonstrate a potential new method of sterilization by using supercritical fluid carbon dioxide. Using this method we achieve complete inactivation of a wide variety of bacterial organisms at moderate temperatures and in the absence of organic solvents or irradiation. Sterilization is a function of both the proximity to the fluid’s critical point and the chemical nature of the fluid itself. When biodegradable polymers poly(lactic- co- glycolic) acid and polylactic acid were included in the sterilization process, there was no effect on the inactivation efficiency, yet no physical or chemical damage to these thermally and hydrolytically labile materials was observed.

The aim of this review paper is to compare the potential of various techniques developed for production of homogenous, stable liposomes. Traditional techniques, such as Bangham, detergent depletion, ether/ethanol injection, reverse-phase evaporation and emulsion methods, were compared with the recent advanced techniques developed for liposome formation. The major hurdles for scaling up the traditional methods are the consumption of large quantities of volatile organic solvent, the stability and homogeneity of the liposomal product, as well as the lengthy multiple steps involved. The new methods have been designed to alleviate the current issues for liposome formulation. Dense gas liposome techniques are still in their infancy, however they have remarkable advantages in reducing the use of organic solvents, providing fast, single-stage production and producing stable, uniform liposomes. Techniques such as the membrane contactor and heating methods are also promising as they eliminate the use of organic solvent, however high temperature is still required for processing.

Phthalic anhydride is a chemical of considerable importance and is generally produced by the vapor-phase oxidation of o-xylene or naphthalene over vanadium pentoxide catalysts according to