In this Letter we present an experimental analysis of the acoustic transmission of a two-dimensional periodic array of rigid cylinders in air with two different geometrical configurations: square and triangular. In both configurations, and above a certain filling fraction, we observe an overlap, in the range of the audible frequencies, between the attenuation peaks measured along the two high-symmetry directions of the Brillouin zone. This effect is considered as the fingerprint of the existence of a full acoustic gap. Nevertheless, the comparison with our calculation of band structures shows that the triangular lattice has band states in that frequency range. We call them deaf bands. This contradictory result is explained by looking at the symmetry of the deaf bands; they cannot be excited by experiments of sound transmission.

We show that a sonic crystal made of periodic distributions of rigid cylinders in air acts as a new material which allows the construction of refractive acoustic devices for airborne sound. It is demonstrated that, in the long-wave regime, the crystal has low impedance and the sound is transmitted at subsonic velocities. Here, the fabrication and characterization of a convergent lens are presented. Also, an example of a Fabry-Perot interferometer based on this crystal is analyzed. It is concluded that refractive devices based on sonic crystals behave in a manner similar to that of optical systems.

It is well known that certain periodic structures built by repetition of elements produce sound attenuation effects as a consequence of the destructive interference of the scattered waves by these elements. The sound attenuation results that we got from transmission experiments with these kind of structures, so-called sonic crystals (SCs), led us to think that SCs could be used as an acoustic barrier. Until now, most of the transmission experiments with these periodic arrays of scatterers have been performed under controlled conditions, so how they would behave outdoors is still not well known. In this letter we present outdoor-experimental results for two-dimensional SCs and from these it can be concluded that periodic arrays of scatterers are a suitable device to reduce noise in free-field conditions.

We show that absolute sonic band gaps produced by two-dimensional square and triangular lattices of rigid cylinders in air can be increased by reducing the structure symmetry. In the case of square lattices, symmetry reduction is achieved by a smaller diameter cylinder placed at the center of each unit cell. For triangular lattices the reduction is achieved by decreasing the diameter of the cylinder at the center of the hexagons in the lattice. Theoretical predictions are also demonstrated experimentally: starting from a honeycomb lattice (using cylinders of 4 cm of diameter size and 6.35 cm nearest-neighbor distance) we have studied the transition to a triangular symmetry by putting rods with increasing diameter (in the range 0.6–4 cm) at the center. The greatest enhancement of the attenuation strength observed in transmission experiments has been obtained in the high frequency region for diameter ratios in the range 0.1–0.3.

The development of flat acoustic lenses for different applications such as biomedical engineering is a topic of great interest. Flat lenses like Fresnel Zone Plates (FZPs) are capable of focusing energy beams without the need of concave or convex geometries, which are more difficult to manufacture. One of the possible applications of these type of lenses is tumor ablation through High Intensity Focused Ultrasound (HIFU) therapies with real time Magnetic Resonance Imaging (MRI) monitoring. In order to be MRI compatible, the FZP material cannot have electromagnetic interaction. In this work, a Phase-Reversal FZP (PR-FZP) made of Polylactic Acid (PLA) manufactured with a commercial 3D printer is proposed as a better, more efficient and MRI compatible alternative to conventional Soret FZPs. Phase-Reversal lenses, unlike traditional FZPs, take advantage of all the incident energy by adding phase compensation regions instead of pressure blocking regions. The manufactured PR-FZP achieves 21.9 dB of focal gain, which increases the gain compared to a Soret FZP of its same size by a factor of 4.0 dB. Both numerical and experimental results are presented, demonstrating the improved focusing capabilities of these types of lenses.