The improvement of the overall utilization rate of compressed natural gas (CNG) engine fuel is the basis of efficient energy utilization. On the foundation of heat balance theory of internal combustion engines, this study fully considers the operation characteristics of CNG engines and systematically analyzes the distribution characteristics of different waste heat under variable working conditions. The nonlinear relationship between speed and intercooler heat source becomes evident with the increasing of intake mass flow rate. In accordance with the structural characteristics, the thermodynamic model, heat transfer model and environmental model of dual-loop organic Rankine cycle (DORC) are constructed. The system potential in full working environments is systematically evaluated. Compared with the speed, airmass flow has a significant effect on comprehensive performance of loop. The maximum power, heat transfer area and power output of per unit heat transfer area (POPA) of DORC are 36.42 kW, 23.34 m2, and 1.75 kW/m2, respectively. According to the operating characteristics of different loops, the variation laws of loop performance under the influence of multiple parameters are analyzed. The synergistic influence laws of multiple variables on system performance are also analyzed.
The organic Rankine cycle (ORC) system is an important technology for recovering energy from the waste heat of internal combustion engines, which is of significant importance for the improvement of fuel utilization. This study analyses the performance of vehicle ORC systems and proposes a rapid optimization method for enhancing vehicle ORC performance. This study constructed a numerical simulation model of an internal combustion engine-ORC waste heat recovery system based on GT-Suite software v2016. The impact of key operating parameters on the performance of two organic Rankine cycles: the simple organic Rankine cycle (SORC) and the recuperative organic Rankine cycle (RORC) was investigated. In order to facilitate real-time prediction and optimization of system performance, a data-driven rapid prediction model of the performance of the waste heat recovery system was constructed based on an artificial neural network. Meanwhile, the NSGA-II multi-objective algorithm was used to investigate the competitive relationship between different performance objective functions. Furthermore, the optimal operating parameters of the system were determined by utilizing the TOPSIS method. The results demonstrate that the highest thermal efficiencies of the SORC and RORC are 6.21% and 8.61%, respectively, the highest power outputs per unit heat transfer area (POPAs) are 6.98 kW/m2 and 8.99 kW/m2, respectively, the lowest unit electricity production costs (EPC) are 7.22 × 10−2 USD/kWh and 3.15 × 10−2 USD/kWh, respectively, and the lowest CO2 emissions are 2.85 ton CO2,eq and 3.11 ton CO2,eq, respectively. The optimization results show that the RORC exhibits superior thermodynamic and economic performance in comparison to the SORC, yet inferior environmental performance.
Frequent fluctuations of CNG engine operating conditions make the waste heat source have uncertain, nonlinear, and strong coupling characteristics. These characteristics are not conducive to the efficient recovery of the DORC system. The systematic evaluation of the CNG engine waste heat source and the comprehensive performance of the DORC system is conducive to the efficient use of waste heat. Based on the theory of internal combustion (IC) engine thermal balance, this paper analyzes the dynamic characteristics of compressed natural gas (CNG) engine waste heat energy under full operating conditions. Then, based on the operating characteristics of the dual loop organic Rankine cycle (DORC) system, thermodynamic models, heat transfer models, and economic models are constructed. The dynamic response characteristics analysis and energy, exergy, and economic (3E) evaluation of the DORC system under full operating conditions are carried out. The results show that the maximum values of net power output, heat exchange area, and the minimum values of EPC (electricity production cost) and PBT (payback time) are all obtained under rated condition, which are 174.03 kW, 25.86 kW, 37.54 kW, 24.76 m2, 0.15 $/kW·h and 3.46 years. Therefore, the rated condition is a relatively ideal design operating point for the DORC system. The research in this paper not only provides a reliable reference for the comprehensive analysis and evaluation of the performance of the DORC system, but also provides useful guidance for the selection of appropriate DORC system design operating points.