Pomegranate is a fruit desirable for its nutritional and medicinal properties which has a great industrial potential that is yet under-explored. Notable for its integral use, the peels are used in medicinal infusions and the seeds consumed without restrictions. In this sense, the objective of this work is to determine the drying kinetics of pomegranate peels and seeds in a hot air circulation oven, at temperatures of 50, 60, and 70 °C, adjust mathematical models to experimental data, determine the effective diffusivities and thermodynamic properties of the process and the physicochemical characteristics of peels and seeds of fresh pomegranates and in their flours. Twelve models were used to adjust the drying kinetics, obtaining better results with the Diffusion Approximation model, Verma, and modified Henderson and Pabis. The effective diffusivities were well represented by an Arrhenius equation, with activation energies of 31.39 kJ/mol for seeds and 10.60 kJ/mol for peels. In the drying process, the seeds showed higher values of enthalpy, entropy, and Gibbs free energy concerning peels. Pomegranate peel and seed flours have proximal composition and distinct physicochemical characteristics, with high fiber, carbohydrate, and energy content. In addition, peel flours stand out for their mineral content, and seed flours do for their lipid and protein content.

The objective of this work was to obtain the drying kinetic curves of white-fleshed ‘pitaya’ peels and characterize the obtained powder regarding physical and chemical parameters. Different mathematical models were fitted to the experimental data of drying kinetics, considering the coefficient of determination (R²), mean square deviation (MSD) and residual distribution as fit criteria. The peels had an initial moisture content of 93.38% (w.b.) and final moisture contents of 5.39% at temperature of 50 °C, 5.27% at 60 °C and 4.40% at 70 °C. After drying, the peels were disintegrated to obtain the powders and characterized for moisture content, reducing sugars, total titratable acidity, ascorbic acid, betacyanins, betaxanthins, water activity and color, in order to evaluate the influence of temperature on the quality of powders. The Page model was the one that best fitted to the experimental data, presenting coefficient of determination higher than 0.998, mean square deviation lower than 0.02 and random distribution of residuals. Increment in drying air temperature promoted increase of pH, ascorbic acid, luminosity and yellowness, and reduction of moisture content, reducing sugars, acidity, betacyanins, betaxanthins, water activity and redness. Considering the retention of betalains, the drying temperature of 50 °C is the most suitable for the production and use of ‘pitaya’ peel powder.

The present study investigated the mathematical modeling foam-mat drying kinetics of cumbeba pulp and the effect of drying conditions on the color and contents of ascorbic acid, flavonoids, and phenolic compounds of the powder pulps obtained. Foam-mat drying was carried out in a forced air circulation oven at temperatures of 50, 60, and 70 °C, testing foam-mat thicknesses of 0.5, 1.0, and 1.5 cm. The increase in the water removal rate is a result of the increase in air temperature and the decrease in the thickness of the foam layer. Among the empirical and semi-empirical mathematical models, the Midilli model was the one that best represented the drying curves in all conditions evaluated. Effective water diffusivity ranged from 1.037 × 10⁻⁹ to 6.103 × 10⁻⁹ m² s⁻¹, with activation energy of 25.212, 33.397, and 36.609 kJ mol⁻¹ for foam thicknesses of 0.5, 1.0, and 1.5 cm, respectively. Cumbeba powders showed light orangish colors and, as the drying temperature increased from 50 to 70 °C, for all thicknesses, the lightness value (L*) decreased and the values of redness (+a*) and yellowness (+b*) increased. Foam-mat drying at higher temperatures (60 and 70 °C) improved the retention of ascorbic acid and flavonoids, but reduced the content of phenolic compounds, while the increase in thickness, especially for flavonoids and phenolic compounds, caused reduction in their contents. The foam-mat drying method allowed obtaining a good-quality cumbeba pulp powder.

This study aimed to dry ‘bacaba’ (Oenocarpus bacaba Mart.) pulp under different thermal conditions, fit different mathematical models to the dehydration curves, and calculate the diffusion coefficients, activation energy and thermodynamic properties of the process. ‘Bacaba’ fruits were meshed to obtain the pulp, which was dried at temperatures of 40, 50 and 60 °C and with thickness of 1.0 cm. Increase in drying temperature reduced the dehydration times, as well as the equilibrium moisture contents, and drying rates of 0.65, 1.04 and 1.25 kg kg min-1 were recorded at the beginning of the process for temperatures of 40, 50 and 60 °C, respectively. The Midilli’s equation was selected as the most appropriate to predict the drying phenomenon, showing the highest R2, lowest values of mean square deviation (MSD) and χ2 under most thermal conditions, and random distribution of residuals under all experimental conditions. The effective diffusion coefficients increased with increasing temperature, with magnitudes of the order of 10-9 m2 s-1, being satisfactorily described by the Arrhenius equation, which showed activation energy (Ea) of 37.01 kJ mol-1. The drying process was characterized as endergonic, in which enthalpy (ΔH) and entropy (ΔS) reduced with the increment of temperature, while Gibbs free energy (ΔG) was increased.

O acuri é uma fruta pouco explorada industrialmente, mas com grandes perspectivas e possibilidades de uso. Para tanto, torna-se necessário reduzir o seu teor de água, aumentando então a sua vida útil, o que possibilitará sua utilização em mercados distantes dos locais de produção. Nesse sentido, objetivou-se secar fatias de acuri, com espessura de aproximadamente 4,07 mm, nas temperaturas de 60, 70, 80 e 90 °C, ajustar diferentes modelos matemáticos aos dados experimentais e determinar os coeficientes de difusão, a energia de ativação e as propriedades termodinâmicas. Observou-se que o aumento de temperatura de 30°C reduziu em 36% o tempo total de processo, sendo obtidas taxas de secagem máximas de 1,22; 1,88; 2,16, e 2,45 kg de água kg de matéria seca min^-1 nas temperaturas de 60, 70, 80 e 90 °C, respectivamente. Dentre os modelos matemáticos testados, o modelo logarítmico apresentou os melhores parâmetros de ajustes aos dados experimentais e foi selecionado como o mais adequado para representar o fenômeno investigado. Os coeficientes de difusão efetivos aumentaram com o incremento de temperatura, apresentando-se na ordem de 10^-10 m² s^-1 , e sua dependência com a temperatura foi descrita pela Equação de Arrhenius, que apresentou energia de ativação de 17,66 kJ mol^-1 . Os valores de entalpia e entropia reduziram com a elevação da temperatura de secagem, enquanto que a energia livre de Gibbs foi ampliada na faixa de temperatura avaliada.

The residue generated from the processing of Tacinga inamoena (cumbeba) fruit pulp represents a large amount of material that is discarded without proper application. Despite that, it is a raw material that is source of ascorbic acid, carotenoids and phenolic compounds, which are valued in nutraceutical diets for allegedly combating free radicals generated in metabolism. This research paper presents a study focused on the mathematical modeling of drying kinetics and the effect of the process on the level of bioactive of cumbeba residue. The experiments of cumbeba residue drying (untreated or whole residue (WR), crushed residue (CR) and residue in the form of foam (FR)) were carried out in a fixed-bed dryer at four air temperatures (50, 60, 70 and 80 °C). Effective water diffusivity (D_eff) was determined by the inverse method and its dependence on temperature was described by an Arrhenius-type equation. It was observed that, regardless of the type of pretreatment, the increase in air temperature resulted in higher rate of water removal. The Midilli model showed better simulation of cumbeba residue drying kinetics than the other models tested within the experimental temperature range studied. Effective water diffusivity (D_eff) ranged from 6.4890 to 11.1900 × 10⁻⁶ m²/s, 2.9285 to 12.754 × 10⁻⁹ m²/s and 1.5393 × 10⁻⁸ to 12.4270 × 10⁻⁶ m²/s with activation energy of 22.3078, 46.7115 and 58.0736 kJ/mol within the temperature range of 50–80 °C obtained for the whole cumbeba, crushed cumbeba and cumbeba residue in the form of foam, respectively. In relation to bioactive compounds, it was observed that for a fixed temperature the whole residue had higher retention of bioactive compounds, especially phenolic compounds, whereas the crushed residue and the residue in the form of foam had intermediate and lower levels, respectively. This study provides evidence that cumbeba residue in its whole form can be used for the recovery of natural antioxidant bioactive compounds, mainly phenolic compounds, with the possibility of application in the food and pharmaceutical industries.