Supercapacitors, also called ultracapacitors or electrochemical capacitors, store electrical charge on high-surface-area conducting materials. Their widespread use is limited by their low energy storage density and relatively high effective series resistance. Using chemical activation of exfoliated graphite oxide, we synthesized a porous carbon with a Brunauer-Emmett-Teller surface area of up to 3100 square meters per gram, a high electrical conductivity, and a low oxygen and hydrogen content. This sp²-bonded carbon has a continuous three-dimensional network of highly curved, atom-thick walls that form primarily 0.6- to 5-nanometer-width pores. Two-electrode supercapacitor cells constructed with this carbon yielded high values of gravimetric capacitance and energy density with organic and ionic liquid electrolytes. The processes used to make this carbon are readily scalable to industrial levels.

An activity lift for platinum: Platinum is an excellent but expensive catalyst for the oxygen reduction reaction (ORR), which is critical for fuel cells. Alloying platinum with other metals can create shells of platinum on cores of less expensive metals, which increases its surface exposure, and compressive strain in the layer can also boost its activity (see the Perspective by Stephens et al. ). Bu et al. produced nanoplates—platinum-lead cores covered with platinum shells—that were in tensile strain. These nanoplates had high and stable ORR activity, which theory suggests arises from the strain optimizing the platinum-oxygen bond strength. Li et al. optimized both the amount of surface-exposed platinum and the specific activity. They made nanowires with a nickel oxide core and a platinum shell, annealed them to the metal alloy, and then leached out the nickel to form a rough surface. The mass activity was about double the best reported values from previous studies. Science , this issue p. 1410 , p. 1414 ; see also p. 1378

Disorderly Flow: Lithium batteries are becoming ever more important in society. While their application used to be confined to portable electronics, they are now becoming the enabling technology for electric vehicles and grid storage for renewables. Generally, the flow of lithium ions into and out of battery electrodes is thought to require ordered materials. Lee et al. (p. 519 , published online 9 January) used a combination of experimental work and computations to identify disordered electrode materials with high Li diffusion. The improved energy density properties could be attributed to compositions with excess lithium beyond the stoichiometric limit, leading to intermixing between the lithium and transition metal sublattices and the formation of a percolation network providing specific lithium transport pathways.