Low-energy electron-diffraction and surface x-ray diffraction data acquired from TiO2(110)(1\ifmmode\times\else\texttimes\fi{}1) are reanalyzed to confirm the integrity of the previously reported optimized geometries. This work is performed in response to ab initio density-functional theory calculations that suggest that the atomic displacements determined from low-energy electron-diffraction measurements may be compromised by the limited number of optimized atom positions. Performing structural optimizations as a function of depth into the selvedge, this present study validates the previous experimental structure determinations.
Based on practical problem in industrial ultrasonic cleaning, this research has an objective to simulate acoustic pressure leading to cavitation in a cleaning tank. By using Harmonic response in ANSYS as simulation software, acoustic pressure distribution has been simulated at different position in the cleaning tank. The result has been confirmed by aluminum foil corrosion test. The simulations show that increasing power of piezoelectric transducers can lead to increasing the power of acoustic pressure; however, it cannot lead to the change of acoustic pressure distribution. To change the acoustic pressure distribution, the difference of frequencies is required. For such typical ultrasonic cleaning tank, the position of the highest cleaning efficiency is at the middle of the tank. Finally, the result can lead to the optimization between the power and frequency of ultrasonic to reach the maximum cleaning efficiency.