Generally, waste heat is redundantly released into the surrounding by anthropogenic activities without strategized planning. Consequently, urban heat islands and global warming chronically increases over time. Thermophotovoltaic (TPV) systems can be potentially deployed to harvest waste heat and recuperate energy to tackle this global issue with supplementary generation of electrical energy. This paper presents a critical review on two dominant types of semiconductor materials, namely gallium antimonide (GaSb) and indium gallium arsenide (InGaAs), as the potential candidates for TPV cells. The advantages and drawbacks of non-epitaxy and epitaxy growth methods are well-discussed based on different semiconductor materials. In addition, this paper critically examines and summarizes the electrical cell performance of TPV cells made of GaSb, InGaAs and other narrow bandgap semiconductor materials. The cell conversion efficiency improvement in terms of structural design and architectural optimization are also comprehensively analyzed and discussed. Lastly, the practical applications, current issues and challenges of TPV cells are critically reviewed and concluded with recommendations for future research. The highlighted insights of this review will contribute to the increase in effort towards development of future TPV systems with improved cell conversion efficiency.
The investigation on the effect of illumination power intensities for a thermophotovoltaic (TPV) system is crucial to enhance the TPV cell performance. To date, the studies on the effect of illumination intensities were limited to solar photovoltaic cells application. Meanwhile, the reported work on the impact of infrared illumination intensities on TPV cells are done at limited temperatures and intensities. The effects of TPV intensities on all performance parameters are not comprehensively studied and fully elucidated. Therefore, this paper investigates the performance of indirect-bandgap Germanium (Ge) and direct-bandgap Indium Gallium Arsenide (InGaAs) cells under various TPV spectral irradiances. Silvaco TCAD simulation software was used to investigate the effect of blackbody temperatures ranging from 800 to 2000 K with different illumination intensities on the TPV cell performances. It was found that higher conversion efficiencies are achieved for both TPV cells under higher illumination intensities due to the increase in open-circuit voltage and fill factor. As the beam intensity increases for temperatures >1600 K, fill factor slowly increases for the Ge cell, but decreases for the InGaAs cell due to the increase in the I 2 R s losses associated with the high current. The finding demonstrates that the open-circuit voltage of indirect-bandgap TPV cell is significantly increased with higher illumination intensities. The variations in cells performance are explicitly explained based on factors such as TPV design structure and the physical properties of semiconductor at varying illumination intensities. The performance of both TPV cells were also analyzed at the minimum optical losses. Average efficiencies of Ge and InGaAs TPV cells were increased to 26.05% and 27.92%, respectively, when the optical losses were minimized with anti-reflection coating and thicker absorber layer. The results of this work demonstrate that by detailed consideration of the effect of spectral irradiances, a high-performance TPV system can be developed.
19 June 2025 in Solar Energy Materials and Solar Cells
Alongside the growing energy demand, the exploration and invention in technology to achieve world sustainability goal is of particular interest. However, the limitation of low overall energy conversion efficiency in conventional fossil-fuel-fired power plants is yet to be resolved. Thermophotovoltaic (TPV) system is of great interest today, as it promotes the usage of renewable energy and improves the energy efficiency in a plant. Narrower bandgap materials such as InGaAsSb TPV cell has been reported to achieve a promising performance for waste-heat application. However, the performance of InGaAsSb TPV cell is yet to be optimized. Hence, this research aims to optimize 0.496 eV InGaAsSb to achieve better cell efficiency using Silvaco software under 10002000 K blackbody temperature, which complies with the heat harvesting application. At 1223 K blackbody temperature InGaAsSb can potentially generate electricity with 10.82% efficiency $\left({{P_{out}} = 0.286{\text{W/c}}{{\mathrm{m}}^2}} \right)$ . By optimizing the doping level and emitter thickness, it is capable to produce a maximum output power of 0.31 and 0.33 W/cm 2 , respectively. Thus, this study shall contribute to the development of narrow bandgap TPV device for waste heat recovery system.
In 0.53 Ga 0.47 As III–V semiconductor material has attracted significant attention from thermophotovoltaic research community due to its excellent optical and electrical properties. Furthermore, a high crystal In 0.53 Ga 0.47 As structure can be grown on a lattice-matched InP substrate, making it a suitable candidate for large-scale production. However, the predominant drawback of the cell is low conversion efficiency, and there is a lack of detailed analysis of the effect of waste heat temperatures on the cell performance. Therefore, this work aims to conduct a comprehensive analysis via optimizing the active junction and characterizing the In 0.53 Ga 0.47 As TPV structure under different waste heat temperatures ranging from 800 to 2000 K. TCAD Silvaco software was used to simulate the output performance of the TPV cell. The simulation results were validated with the reported experimental results. Results show that the variation of base layer thicknesses significantly affect the cell performance, with a significant increase in efficiency from 6.98 to 18.2% at a radiation temperature of 1000 K, as the base thickness increased from 1 to 13 μm. For radiation's temperatures from 800 K to 2000 K, the efficiencies of the optimized TPV cells increased by more than 10% as compared to the reference structure. The results obtained from this study contribute to the understanding of the effects of various waste heat temperatures on the performance of In 0.53 Ga 0.47 As TPV cell, as well as to provide useful guidelines to fabricate high-performance In 0.53 Ga 0.47 As TPV cell for various waste heat temperatures.
3 July 2026 in Solar Energy Materials and Solar Cells