We demonstrate an all polarization-maintaining (PM) fiber based dual-wavelength mode-locked Er-fiber laser. A nonlinear amplifying loop mirror (NALM) with an intracavity nonreciprocal phase shifter is used for self-started mode-locking. A short segment of PM fiber is angle-spliced to the NALM, functioning as a PM Sagnac loop filter, thus enabling dual-wavelength mode-locking. The wavelength separation is solely determined by the angle-spliced PM fiber length. Stable dual-wavelength mode-locking operation is switchable between 1570/1581 nm and 1581/1594 nm. The two-color pulse trains oscillating in the same cavity have an inherent offset repetition rate of ~1 kHz owing to cavity dispersion, allowing future high precision dual-comb applications with a simple and robust configuration.

The interactions of optical solitons in passively mode-locked lasers result in abundant bound states that reflect intriguing nonlinear attractor behaviors in complex dissipative systems. In this study, we tested the strength limits of the fixed-point attractors that govern bound soliton molecule formation in passively mode-locked lasers. To this end, we probed the relative timing jitter in a closely separated stationary doublet soliton molecule produced by a Kerr-lens mode-locked Ti:sapphire laser. By adopting a balanced optical cross-correlation method with a 5 z s / 0 H z temporal resolution, we derive an upper estimate of 60 as intramolecular timing jitter, which is integrated from 100 Hz to the Nyquist frequency (60 MHz). To the best of our knowledge, this is the first evidence for attosecond timing jitter within robust bound solitons in dissipative systems.

After five decades of development, mode-locked lasers have become significant building blocks for many optical systems in scientific research, industry, and biomedicine. Advances in noise measurement and reduction are motivated for both shedding new light on the fundamentals of realizing ultra-low-noise optical frequency combs and their extension to potential applications for standards, metrology, clock comparison, and so on. In this review, the theoretical models of noise in mode-locked lasers are first described. Then, the recent techniques for timing jitter, carrier-envelope phase noise, and comb-line noise measurement and their stabilization are summarized. Finally, the potential of the discussed technology to be fulfilled in novel optical frequency combs, such as electro-optic (EO) modulated combs, microcombs, and quantum cascade laser (QCL) combs, is envisioned.

Mode-locked lasers with low noise performance, such as low timing jitter and relative intensity noise are essential for high-precision applications. In this letter, we demonstrated a 122-MHz all-polarization-maintaining mode-locked Er-doped fiber laser based on a nonlinear amplifying loop mirror. A hybrid component integrating a wavelength division multiplexer and a phase shifter is applied to increase the repetition rate. The relative intensity noise is 0.004% and 0.76% rms (integrated from 1 MHz to 100 Hz) from two output ports. The timing jitter characteristic is measured by the delayed optical heterodyne method. The timing jitter is ~1.9 fs rms (integrated from 1 MHz to 10 Hz) of both two output ports. The origin of the timing jitter of this laser is analyzed numerically based on the well-established theoretical model using the laser’s repetition rate, cavity dispersion, etc.