Cellulose-based materials represent a renewable, biodegradable, and environmentally friendly alternative to plastic from fossil resources. Nanopaper is a strong and lightweight material formed from cellulose nanofibrils (CNFs). Paper and nanopaper have been considered as excellent alternatives to plastics for use in agriculture and for packaging applications. However, common for both paper and nanopaper is their hydrophilic character, and consequently, poor water-resistance properties. ORMOCER®s are a class of inorganic–organic polymers with excellent barrier and protective properties used for a range of coating applications. Here we present ORMOCER®-coated paper and nanopaper. The coated papers and nanopapers are characterized, both in terms of their morphology, hydrophobicity, and mechanical properties. We demonstrate that the pressure used during the pressing and drying of paper and nanopaper influence their tear and tensile—properties, and that the morphology of the coated nanopaper differs significantly from that of the coated paper. While the ORMOCER® was impregnated within the porous network of the paper, a well-defined two-layered morphology was obtained with the coated nanopaper. Further, the biodegradability of the nanopaper with and without coating was assessed. The degradation study demonstrated that both the pressure used during the pressing and drying of the nanopaper, and the composition of the ORMOCER®, influenced the rate of degradation. Taken together, ORMOCER®-coated paper and nanopaper are promising for the preparation of materials that are both water-resistant, renewable, and biodegradable.
Biodegradable packaging materials are already in use. However, there are severe restrictions preventing the broad application in food packaging, especially due to insufficient barrier properties. Our idea was to improve these properties with a biodegradable coating. The Fraunhofer-Institut für Silicatforschung ISC has been developing high-barrier coatings for various packaging applications based on a class of materials with glass-like structural units, named ORMOCER®. However, these state-of-the-art ORMOCER® coatings are not biodegradable. The aim of our work was to modify ORMOCER® to become biodegradable and, at the same time, preserve the barrier and functional properties. This was achieved by the incorporation of functionalized tamarind hemicellulose Glyate® into the ORMOCER® matrix. For this purpose a two-step amination reaction of Glyate® was chosen. The aminated product was analyzed by FTIR, solid-state NMR and elemental analysis. New aminated Glyate® containing bioORMOCER® lacquers could be synthesized. Lacquer quality assessment was performed by Raman spectroscopy. The properties of the resulting coatings were evaluated by laser scanning microscopy (LSM), oxygen transmission rates (OTR) measurements, E-Module determination and adhesion tests. Standardized tests for compostability, overall migration and antimicrobial properties were performed for the bioORMOCER® coatings. The evaluation showed that the new bioORMOCER® coatings are suitable for sustainable food packaging.
The shift from fossil-based packaging materials to more sustainable alternatives is driven by evolving environmental regulations aiming for enhanced recyclability and biodegradability. Dispersion coatings, as opposed to extrusion-based approaches, offer significant advantages by reducing the coat weights, but generally, multiple coating layers are needed to meet functional performance requirements. This study explores the application of upscaled multilayer dispersion coatings comprising polylactic acid-based coating (PLAX) and hybrid nanomaterial lacquer (bioORMOCER®) on commercial base papers for barrier packaging using semi-pilot reverse gravure and industrial-scale rod coaters. One multilayer structure demonstrated a low water vapour transmission rate (WVTR), achieving a WVTR of 12 g/(m2·day) under standard conditions and a 78% reduction of WVTR compared to the substrate under elevated humidity. The other multilayer structure exhibited an excellent oxygen transmission rate (OTR) of 2.3 cc/(m2·day·bar) at dry conditions, which is comparable to conventional high-performance alternatives. Both multilayer coatings enhanced the grease and mineral oil barriers significantly, as heptane vapour transmission rate (HVTR) reductions exceeded 97%. The multilayer coatings demonstrated strong potential for scalable production of sustainable, high-barrier packaging materials. These findings highlight the capability of dispersion coatings to replace traditional fossil-based barriers, advancing the development of environmentally friendly packaging solutions.
Oxygen scavengers are used to reduce the oxygen permeation of packaging (active barrier) and to absorb oxygen from its direct environment, e.g., a headspace of packaged food. Few oxygen scavenger coatings have been developed. Therefore, in this study, a novel oxygen scavenger coating has been developed. It is based on inorganic–organic polymers (ORMOCER®). The oxygen absorption reaction is activated by UV light. The scavenger was synthesized, coated on aluminum foil, subsequently dried and afterwards laminated with a polyethylene sealing layer. UV light activates the oxygen scavenging reaction. The oxygen absorption capacity, measured at 23 °C and 0% r.h., was 242 ± 8 mg oxygen/g scavenger coating. When the oxygen scavenger coating layer was laminated by using a two-component polyurethane laminating adhesive, the absorption capacity was hardly reduced, with a measured absorption capacity of 223 ± 18 mg oxygen/g scavenger coating. In an experimental packaging sample with the oxygen scavenger coating with a thickness (dry) of 3 µm and 18 µm, near-zero mbar oxygen partial pressure was reached by the non-laminated oxygen scavenger coatings within two days, and within about 20 days when laminated with a polyurethane laminating adhesive and a PE-layer on the oxygen scavenger layer. The oxygen partial pressure was kept near zero mbar for 500 days, whereas in the experimental packaging without oxygen scavenger, the oxygen partial pressure increased to 110 mbar during this time. The developed oxygen scavenger based on inorganic–organic polymers can be applied as wet chemical coating on various surfaces with standard application procedures. Application scenarios are oxygen-sensitive goods such as food, pharmaceutical products and cosmetics.
21 October 2025 in ACS Sustainable Chemistry & Engineering
Redefining the role of silicones in the chemistry of inorganic–organic hybrid polymer coatings by introducing them as molecular break points in addition to their function as hydrophobicity enhancers.