In this study, experiments were performed to investigate the aerodynamic interaction between a helicopter and ground obstacles. A new experimental set-up was realised and validated. The motorised helicopter model, which included the fuselage, was positioned in different positions relative to a model building in order to replicate different hovering configurations. The use of a helicopter model with a six-component balance and a building model with several pressure taps allowed a database to be compiled for the loads on the helicopter and obstacle. First several tests were performed without the building in order to develop a reference database and assess the experimental set-up through a comparison with results in the literature. The measured loads were analysed to investigate the interference effects of the building model on the helicopter performance. A physical interpretation of the flow phenomena was obtained through analysis of the obstacle pressure measurements and particle image velocimetry surveys of relevant configurations.
In this paper, a comprehensive experimental survey of the aerodynamic interaction of a hovering rotor in the proximity of a ground obstacle is described, taking advantage of multiple experimental techniques. Load measurements on the rotor were carried out to assess the change in the rotor performance for different positions with respect to the cubic obstacle, thus simulating a set of possible hovering flight conditions around the obstacle. Laser Doppler anemometry measurements of the rotor inflow were used to investigate how the aerodynamic interaction affected the rotor performance. Stereoscopic particle image velocimetry measurements in the region between the rotor and the obstacle were carried out to gain a better insight of the interacting flow field. The investigation showed two main regions of interest. The first region is the one above the edge of the obstacle, where the rotor experiences a gradual ground effect as it is positioned over the obstacle. The second region, probably of more interest, is the one just beside the obstacle where a recirculation region between the rotor and the obstacle develops, causing both a significant reduction in the thrust augmentation experienced in unobstructed hover in ground effect and significant pitching and rolling moments, due to the nonsymmetrical inflow pattern on the rotor.