Tatiana Shilova

Mrs. Tatiana Shilova


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 April 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
TSTatiana Shilova
Tatiana Shilova
SSSergey Serdyukov
Sergey Serdyukov
A prediction of the permeability of gas-bearing coking coals in the Leninsky area, Kuznetsk coal basin (Kuzbass), which is promising for the production of coal methane, was performed. The results of laboratory studies of coal permeability and cleat compressibility under hydrostatic stress conditions are presented. As the confining pressure increased by 8 times (from 1 MPa to 8 MPa), the coal permeability perpendicular to the butt cleat direction decreased by 6.7 times (from 60 mD to 9 mD). The coal cleat compressibility was 0.085 MPa−1. On the basis of the results of filtration tests and microstructural analysis of the coking coals, we provide the estimation of the permeability anisotropy along the bedding planes (perpendicular to the face and butt cleat directions). The predicted dependences of gas-bearing coking coal permeability perpendicular to the butt and face cleat directions on depth and on features of coal seam bedding were determined under uniaxial strain conditions. It was found that in the coking coal depth intervals, as the depth increased, their permeability decreased by 61–82%. The obtained results can be used to select facilities and to design industrial works for the extraction of coal methane in the region.

1 December 2022 in Polymers
Verified
Journal Article
Open access
PDF file
TSTatiana Shilova
Tatiana Shilova
ASAleksander Serdyukov
Aleksander Serdyukov
SSSergey Serdyukov
Sergey Serdyukov
OIOksana Ivanova
Oksana Ivanova
Our research aims to improve the efficiency of the reinforcement of loose rocks with two-component polymer resins. The standard approach consists of the injection of two pre-mixed components into a rock massive. We propose a stepwise injection of individual components of a resin into the rock and deep extrusion of the solutions into the rock by gas between the injection stages. The experimental results indicate that the proposed method provides a reduction of polymer consumption per unit volume of the rock, and an increase in the impregnation depth, area of the resin impact, and the reinforced rock volume in comparison with the conventional method of prepared resin solution injection. The cured resin partially fills the sand rock pore space, binds the grains, and acts as a reinforcing frame. The highest reinforcement is achieved with the sequential stepwise injection of the resin by separate small portions of each component. We have shown the uniaxial compressive strength is on average more than twice as high that obtained with the conventional injection method. This can be explained by higher fracture toughness of the reinforced rock with a flexible hardened network of the cured resin in the structure.

1 March 2020 in Journal of Mining Science
Verified
Journal Article
Closed access
PDF file
TSTatiana Shilova
Tatiana Shilova
LRL. A. Rybalkin
L. A. Rybalkin
AYA. V. Yablokov
A. V. Yablokov
The procedure is developed for permeability prediction in deep-level fractured coal. Coal permeability and microstructure are experimentally studied on samples taken from Tikhov Mine. The predictive relationships between the occurrence depth and permeability of coal in parallel to master and side cleavage are obtained for the Nikitinsky, Tambovsky and Tarsminsky fields of the Leninsk geological-economic region in Kuzbass.

1 December 2023 in Journal of Mining Science
Verified
Journal Article
Closed access
PDF file
TSTatiana Shilova
Tatiana Shilova
SSS. V. Serdyukov
S. V. Serdyukov
LRL. A. Rybalkin
L. A. Rybalkin
The article describes the studies on permeability of coal cores with a through drainage fracture with and without a monolayer of a proppant. The experimental procedure is descried. The parameters of the jointed structure of test long-flame coal are given. The efficiency of wedging drainage fractures by a sparse proppant monolayer in building up permeability of deep-seated coal is demonstrated.

1 February 2024 in Journal of Mining Science
Verified
Journal Article
Closed access
PDF file
TSTatiana Shilova
Tatiana Shilova
ISI. M. Serdyuk
I. M. Serdyuk
SSS. V. Serdyukov
S. V. Serdyukov
OIO. A. Ivanova
O. A. Ivanova
ASA. S. Serdyukov
A. S. Serdyukov
The article describes the laboratory testing of permeability and structure of loose rock hardened with two-component highly elastic polyurethane resin at different methods of impregnation and at different consumptions of the polymer. Two methods of impregnation are tested: with a single solution as a mixture of two resin components and with a double solution of separate components mixed inside the test rock. It is shown that the decrease in the volume of resin from 20–40 to 5–10 vol% results in abundance of inter-grain voids and through permeable pore channels, and in an increase in the rock permeability by two–three orders of magnitude. The single-solution impregnation with the ready mixture ensures lower permeability of the test samples.

1 February 2026 in Journal of Mining Science
Verified
Journal Article
Closed access
PDF file
TSTatiana Shilova
Tatiana Shilova
The article describes the lab test data on the structure and permeability of sand reinforced with elastic polyurethane. The electron microscopy reveals the spatial patterns of hard polyurethane, voids and mineral particles in reinforced sand. The permeability of the test samples is investigated under conditions of uniform triaxial compression. The response of permeability of reinforced rock to freeze–thaw is analyzed depending on moisture content, specific consumption of chemical reagents and reinforcement method. The stability values of the insulating properties of sand are compared for the cases of sand reinforcement by its mixing with polyurethane resin and through creation of a low-permeable inclusion (injection simulation). The advantage of injection over mixing is shown—the consumption of polymer composition is smaller and the stability to seasonal temperature fluctuations is higher.