The viability and vigor of crop seeds are crucial indicators for evaluating seed quality, and high-quality seeds can increase agricultural yield. The conventional methods for assessing seed viability are time consuming, destructive, and labor intensive. Therefore, a rapid and nondestructive technique for testing seed viability has great potential benefits for agriculture. In this study, single-kernel Fourier transform near-infrared (FT-NIR) spectroscopy with a wavelength range of 1000–2500 nm was used to distinguish viable and nonviable supersweet corn seeds. Various preprocessing algorithms coupled with partial least squares discriminant analysis (PLS-DA) were implemented to test the performance of classification models. The FT-NIR spectroscopy technique successfully differentiated viable seeds from seeds that were nonviable due to overheating or artificial aging. Correct classification rates for both heat-damaged kernels and artificially aged kernels reached 98.0%. The comprehensive model could also attain an accuracy of 98.7% when combining heat-damaged samples and artificially aged samples into one category. Overall, the FT-NIR technique with multivariate data analysis methods showed great potential capacity in rapidly and nondestructively detecting seed viability in supersweet corn.

Seed purity is a key indicator of crop seed quality. The conventional methods for cultivar identification are time-consuming, expensive, and destructive. Fourier transform near-infrared (FT-NIR) spectroscopy combined with discriminant analyses, was studied as a rapid and nondestructive technique to classify the cultivars of sweet corn seeds. Spectra with a range of 1000–2500 nm collected from 760 seeds of two cultivars were used for the discriminant analyses. Thereafter, 126 feature wavelengths were identified from 1557 wavelengths using a genetic algorithm (GA) to build simplified classification models. Four classification algorithms, namely K-nearest neighbor (KNN), soft independent method of class analogy (SIMCA), partial least-squares discriminant analysis (PLS-DA), and support vector machine discriminant analysis (SVM-DA) were tested on full-range wavelengths and feature wavelengths, respectively. With the full-range wavelengths, all four algorithms achieved a high classification accuracy range from 97.56% to 99.59%, and the SVM-DA worked better than other models. From the feature wavelengths, no significant decline in accuracies was observed in most of the models and a high accuracy of 99.19% was still obtained by the PLS-DA model. This study demonstrated that using the FT-NIR technique with discriminant analyses could be a feasible way to classify sweet corn seed cultivars and the proper classification model could be embedded in seed sorting machinery to select high-purity seeds.

The purpose of this paper was to explore the utility of an electronic nose to detect the quality of litchi fruit stored in different environments. In this study, a PEN3 electronic nose was adopted to test the storage time and hardness of litchi that were stored in three different types of environment (room temperature, refrigerator and controlled-atmosphere). After acquiring data about the hardness of the sample and from the electronic nose, linear discriminant analysis (LDA), canonical correlation analysis (CCA), BP neural network (BPNN) and BP neural network-partial least squares regression (BPNN-PLSR), were employed for data processing. The experimental results showed that the hardness of litchi fruits stored in all three environments decreased during storage. The litchi stored at room temperature had the fastest rate of decrease in hardness, followed by those stored in a refrigerator environment and under a controlled-atmosphere. LDA has a poor ability to classify the storage time of the three environments in which litchi was stored. BPNN can effectively recognize the storage time of litchi stored in a refrigerator and a controlled-atmosphere environment. However, the BPNN classification of the effect of room temperature storage on litchi was poor. CCA results show a significant correlation between electronic nose data and hardness data under the room temperature, and the correlation is more obvious for those under the refrigerator environment and controlled-atmosphere environment. The BPNN-PLSR can effectively predict the hardness of litchi under refrigerator storage conditions and a controlled-atmosphere environment. However, the BPNN-PLSR prediction of the effect of room temperature storage on litchi and global environment storage on litchi were poor. Thus, this experiment proved that an electronic nose can detect the quality of litchi under refrigeratored storage and a controlled-atmosphere environment. These results provide a useful reference for future studies on nondestructive and intelligent monitoring of fruit quality.

Significant intensification in livestock farming has become prevalent to meet the increasing meat production demand, resulting in a higher density of pigs in relatively small areas in a commercial swine building. The subsequent challenges of maintaining the quality of both routine management and environmental comfort of pigs to minimize the loss of both pigs’ health and welfare can be attained by implementing autonomous monitoring and intelligent management decisions based on precision livestock farming (PLF). A three-layer wireless sensor network (WSN) based on ZigBee technology has been devised to monitor four environmental parameters in real-time, namely: temperature, relative humidity, concentrations of carbon dioxide and ammonia in a commercial gestating sow house. The overall packet loss rate of the WSN system which reported 16,371 records from its 41 indoor slave nodes in a 10-min interval for three consecutive days was 4%. The carbon dioxide sensors had an average outlier rate of 6.5% after a series of preprocessing procedures. The spatial and temporal characteristics showed that the carbon dioxide level exceeded the limit of 2700 mg/m³ twice during both 07:00–08:00 and 14:00–15:00. Besides, the overall NH₃ concentration in the swine building was maintained in a relatively low-level range with a maximum of less than 8 mg/m³. In sum, the real-time monitoring and timely intervention of microclimate in this commercial gestating sow house can be achieved by deploying this WSN system, thereby making it possible to provide an intelligent decision on precise management of livestock automatically.

This article develops a systematic model to study electric vehicle powertrain system efficiency by combining a detailed model of two-speed dual-clutch transmission system efficiency losses with an electric vehicle powertrain system model. In this model, the design factors including selection of the electric machine, gear ratios’ change, multi-plate wet clutch design, and gear shift schedule design are considered. Meanwhile, the application of detailed model for drag torque losses in the gearbox is discussed. Furthermore, the proposed model, developed with the MATLAB/Simulink platform, is applied to optimize/maximize the efficiency of the electric vehicle powertrain system using genetic algorithms. The optimization results demonstrate that the optimal results are different between simulations via New Europe Drive Cycle and Urban Dynamometer Driving Schedule, and comprehensive design and optimization of the powertrain system are necessary.

In this paper, a lightweight channel-wise attention model is proposed for the real-time detection of five representative pig postures: standing, lying on the belly, lying on the side, sitting, and mounting. An optimized compressed block with symmetrical structure is proposed based on model structure and parameter statistics, and the efficient channel attention modules are considered as a channel-wise mechanism to improve the model architecture.The results show that the algorithm’s average precision in detecting standing, lying on the belly, lying on the side, sitting, and mounting is 97.7%, 95.2%, 95.7%, 87.5%, and 84.1%, respectively, and the speed of inference is around 63 ms (CPU = i7, RAM = 8G) per postures image. Compared with state-of-the-art models (ResNet50, Darknet53, CSPDarknet53, MobileNetV3-Large, and MobileNetV3-Small), the proposed model has fewer model parameters and lower computation complexity. The statistical results of the postures (with continuous 24 h monitoring) show that some pigs will eat in the early morning, and the peak of the pig’s feeding appears after the input of new feed, which reflects the health of the pig herd for farmers.