Conventional grippers are designed for specific applications. They often encounter difficulties when grasping different objects in unstructured environments. This article introduces a novel gripper to challenge the universal grasp capability. Passively slidable pins are array arranged in the gripper. By meshing of pin’s elliptical contour, shape adaption to various objects is achieved in both vertical and horizontal directions using a single motor. Contact force is analyzed based on static and kinetic friction. Kinematic simulation on the grasping process reveals the interaction between critical parameters and the overall grasp performance. To conclude, a prototype pin array gripper demonstrates high adaptability to various objects in real-world testing.
This paper proposes a soft robot hand with pin-array structure and self-adaptive function, CTSA-II hand, where CTSA is the Cluster tube self-adaption. The CTSA-II hand is designed with a quite concise structure and consists of bases, a pin array, a spring array, and a membrane. When the CTSA-II hand grasps an object, the pins will slide along the trajectory to conform to the profile of the object under the reaction force applied by the object, and thus the outer membrane will form a specific shape, and then the vacuum drives the CTSA-II hand to grasp the object. Theoretical analysis shows that the CTSA-II hand can generate enough grasping force and get good stability. Moreover, the optimization of its structure is achieved by studying the effects of specific parameters. The capture experimental results of the prototype show that the CTSA-II hand can realize self-adaptive grasping of different sizes and shapes with a high degree of fit and a high success rate. A series of research experiments show the influence of various factors on the grasping force, which verifies the results of the theoretical analysis with the CTSA-II hand. Compared to the traditional robot hand, the CTSA-II hand has good crawl performance, concise structure, small volume, and easy assembly.
28 September 2011 in International Journal of Social Robotics
This paper proposes a novel cluster-tube self-adaptive robot hand (CTSA Hand). The CTSA Hand consists of a base, a motor, a transmission mechanism, multiple elastic tendons, and a group of sliding-tube assemblies. Each sliding-tube assembly is composed of a sliding tube, a guide rod, two springs and a hinge. When the hand grasping an object, the object pushes some sliding tubes to different positions according to the surface shape of the object, the motor pulls the tendons tight to cluster tubes. The CTSA Hand can realize self-adaptive grasping of objects of different sizes and shapes. The CTSA Hand can grasp multiple objects simultaneously because the grasping of the hand acts as many grippers in different directions and heights. The grasping forces of the hand are adjusted by a closed-loop control system with potentiometer. Experimental results show that the CTSA Hand has the features of highly self-adaption and large grasping forces when grasping various objects.