This paper is devoted to the state-of-the-art and technical potentials of the pulse heating method for the thin wire probe created in the Ural thermophysical school for studying the kinetics of spontaneous boiling and the related phenomenon of liquid attainable superheating. Special attention is paid to the search for technical means for controlling the power of the probe heating in a pulse experiment with the thermophysical properties of the substance taken into account. Applications of three particular cases are considered: techniques for the constant heating power, the thermal stabilization of the pulse-heated probe, and cooling of the shock-heated probe for investigating the behavior of multicomponent and high-molecular fluids essentially superheated above the temperature of phase equilibrium and/or temperature of molecule thermodestruction in a quasi-static process. Opportunities for application of the method are presented, in particular, for fast detection of volatile admixtures (including their traces) in high-molecular fluids, e.g., in oils of power equipment.
17 February 2020 in Journal of Engineering Thermophysics
The investigation is focused on the phenomenon of heat transfer deterioration (HTD), inhibiting the use of supercritical fluids in the processes in which high-power local heat release is possible. The ordinary discussion is based solely on the data of quasi-stationary measurements. In order to clarify the intrinsic nature of HTD as an essentially non-stationary phenomenon, it is worthwhile to take into account the peculiarities of heat transfer confined in time and space. In the present paper, we briefly discuss the characteristic features of such heat transfer in supercritical water. The characteristic heating time was \(10^{-3}\div 10^{-2}\) s and the heat flux density through the wall increased up to 15 MW/m\(^{2}\). The results provide the heat transfer pattern under conditions of predominance of the heat conduction mode. Exactly this mode most closely corresponds to the regime of high-power local heat release in a viscous sublayer. We also propose that the effect of threshold decrease in the heat transfer intensity (typical of pulse processes in supercritical transitions) may be a fundamental factor for occurrence of the HTD mode.
4 May 2012 in Journal of Engineering Thermophysics
A technique of electronic control of the probe heating power is developed using the method of controlled pulse heating of a wire probe, that is a resistance thermometer, was developed. An apparatus implementing this technique was fabricated. The characteristic parameters of the apparatus are as follows: the heating pulse length, 1 to 10 ms; the heat flux density through the surface of a 20 µm probe, 1 to 10 MW/m2; repeatability of selected power value in a series of pulses is on a level of 0.05%. As an example, the constant heating power mode is applied for comparing the thermal resistance of nanofluids in the region of stable states of liquid and superheated (with respect to the liquid-vapor equilibrium temperature of the base liquid) ones. The parameter was the content of Al2O3 nanoparticles in the base liquid (isopropanol).
2 November 2012 in International Journal of Heat and Mass Transfer