The presence of nuts in diets has notably increased due to their composition, and the presence of antioxidants and their unsaturated fatty acid profile has led to a considerable increase in their consumption. The volatile profile of nuts is important from different points of view. It affects consumer’s selection, influences raw material selection for the production of composite foods, dictates variety selection in breeding programs, and, from a quality perspective, its changes can indicate food degradation or alteration. A review of the published bibliography concerning the determination of volatiles in nuts has been carried out. The information retrieved has been divided into four main sections. First, a discussion on the main volatiles present in nuts is performed; next, a revision of the methods used to determine the volatiles is presented; and, finally, two sections describing how harvesting conditions, healthy state and the thermal treatment of nuts modifies their volatile profile are added. Analysis of the published bibliography denoted the complexity of volatile determination and the different variables that can modify the compounds present in the volatile fraction of nuts.

The aim of this study was to develop an oxygen scavenger and antioxidant active packaging material for fried peanuts. The packaging solution, which has been made at the laboratory previously, has been developed by cast film extrusion and is composed of low-density polyethylene-ethylene vinyl alcohol-polyethylene terephthalate (LDPE/EVOH/PET)-based films containing β-carotene (CAR). In comparison with film without additive, developed film presented an orange colouring (higher L* and b* values and lower a* values) and an increase in oxygen induction time (OIt) from 4.5 to 14.1 min. The incorporation of β-carotene to the formulation also brings about a significant effect on the thermal stability as maximum degradation temperatures increased around 1%. Regarding the oxygen absorption capacity of the films, values of 1.39 ± 0.10 mL O₂ per g of film at laboratory scale and 1.7 ± 0.3 mL O₂ per g of multilayer (ML)/LDPE_CAR were obtained, respectively, after 3 days, proving the suitability of the packaging solutions as oxygen absorbers. To validate the packaging solution, the oxidative stability of fried peanuts packed in fabricated multilayer β-carotene bags was evaluated for 3 months at 40 °C. The hexanal content remained constant during this period. Meanwhile, peanuts packed in ML without β-carotene increased their hexanal content to 294%. This fact indicated a lower extent of oxidation in fried peanuts compared to food samples packaged in control films, suggesting the potential of ML/LDPE_CAR films as sustainable and antioxidant food packaging systems to offer protection against lipid oxidation in foods. Sensory evaluation confirmed that ML/LDPE_CAR films provided the peanut samples with an extra aroma due to the volatile degradation products of β-carotene (such as β-cyclocitral or 6-methyl-5-hepten-2-ol).

The aim of this study was to develop a double function active packaging material for nuts. The packaging solution, on the one hand, integrated polybutadiene (PB) as an oxygen scavenger and, on the other hand, it incorporated peanut aroma (PA) to improve customer’s sensorial experience. Different formulations based on low density polyethylene (LDPE), commercial PA (5 wt %) and PB at two levels (5 wt % and 13 wt %) were obtained by cast film extrusion. The obtained films were compared in terms of their mechanical, structural, optical and thermal properties confirming a plasticizing effect of PA and PB resulting in an increase in the ductility of the polymer and in a slight decrease in the thermal properties, maintaining their transparency. Regarding the oxygen capacity of the films, values of 4.4 mL and 2.7 mL O₂ g⁻¹ film were obtained for PE/PA/PB13 and PE/PA/PB5, respectively, after 6 days proving the suitability of the UV irradiation treatment in improving the oxygen absorption capacity of PB without the need of a metal catalyst. The aroma retention capacity into the polymer matrix was also evaluated in the developed formulations. The incorporation of PB in 13 wt % into a LDPE matrix improved the PA retention. This behavior was attributed to the ability of PB in enhancing cross-linking of LDPE as the concentration of PB increases. The results suggested the potential of PE/PB/PB13 films as oxygen scavenger and aromatic food packaging system to offer protection against lipid oxidation in nuts.