Droplet microfluidics revolutionizes the way experiments and analyses are conducted in many fields of science, based on decades of basic research. Applied sciences are also impacted, opening new perspectives on how we look at complex matter. In particular, food and nutritional sciences still have many research questions unsolved, and conventional laboratory methods are not always suitable to answer them. In this review, we present how microfluidics have been used in these fields to produce and investigate various droplet-based systems, namely simple and double emulsions, microgels, microparticles, and microcapsules with food-grade compositions. We show that droplet microfluidic devices enable unprecedented control over their production and properties, and can be integrated in lab-on-chip platforms for in situ and time-resolved analyses. This approach is illustrated for on-chip measurements of droplet interfacial properties, droplet–droplet coalescence, phase behavior of biopolymer mixtures, and reaction kinetics related to food digestion and nutrient absorption. As a perspective, we present promising developments in the adjacent fields of biochemistry and microbiology, as well as advanced microfluidics–analytical instrument coupling, all of which could be applied to solve research questions at the interface of food and nutritional sciences.
The production of capsules by inverse gelation consists of adding dropwise oil containing calcium dispersion into an alginate bath. A dripping technique to produce capsules from oil-in-water (O/W) emulsions was proposed by Abang. However, little is known about the oil encapsulation using water-in-oil (W/O) emulsions. This work aims to develop a new method of W/O emulsions encapsulation by inverse gelation. The success of the W/O emulsion encapsulation is due to three factors: 1) use of an emulsion with moderate stability (50 min); 2) production of an emulsion with at least 90 g/L of CaCl2 and 3) addition of ethanol (20% v/v) into the alginate bath. Both wet and dry capsules were obtained with a spherical shape with diameters of 7 and 3.6 mm, respectively. All volume of oil was encapsulated and the oil loading in the wet and dry capsules was of 23 and 68% v/v, respectively.
Plant Acacia gum exudates are composed by glycosylated hydroxyproline-rich proteins, which have a high proportion of heavily branched neutral and charged sugars in the polysaccharide moiety. These hyperbranched arabinogalactan-proteins (AGP) display a complexity arising from its composition, architecture, and conformation, but also from its polydispersity and capacity to form supramolecular assemblies. Flexibility and hydration partly determined colloidal and interfacial properties of AGPs. In the present article, these parameters were estimated based on measurements of density and sound velocity and the determination of volumetric parameters, e.g., partial specific volume (vs°) and coefficient of partial specific adiabatic compressibility coefficient (βs°). Measurements were done with Acacia senegal, Acacia seyal, and fractions from the former separated according to their hydrophobicity by Hydrophobic Interaction Chromatography, i.e., HIC-F1, HIC-F2, and HIC-F3. Both gums presented close values of vs° and βs°. However, data on fractions suggested a less hydrated and more flexible structure of HIC-F3, in contrast to a less flexible and more hydrated structure of HIC-F2, and especially HIC-F1. The differences between the macromolecular fractions of A. senegal are significantly related to the fraction composition, protein/polysaccharide ratio, and type of amino acids and sugars, with a polysaccharide moiety mainly contributing to the global hydrophilicity and a protein part mainly contributing to the global hydrophobicity. These properties form the basis of hydration ability and flexibility of hyperbranched AGP from Acacia gums.
Human adipose-derived stromal cells (hASCs) are widely known for their immunomodulatory and anti-inflammatory properties. This study proposes a method to protect cells during and after their injection by encapsulation in a hydrogel using a droplet millifluidics technique. A biocompatible, self-hardening biomaterial composed of silanized-hydroxypropylmethylcellulose (Si-HPMC) hydrogel was used and dispersed in an oil continuous phase. Spherical particles with a mean diameter of 200 μm could be obtained in a reproducible manner. The viability of the encapsulated hASCs in the Si-HPMC particles was 70% after 14 days in vitro, confirming that the Si-HPMC particles supported the diffusion of nutrients, vitamins, and glucose essential for survival of the encapsulated hASCs. The combination of droplet millifluidics and biomaterials is therefore a very promising method for the development of new cellular microenvironments, with the potential for applications in biomedical engineering.
Adsorption of hyperbranched arabinogalactan-proteins (AGPs) from two plant exudates, A. senegal and A.seyal, was thoroughly studied at the solid–liquid interface using quartz crystal microbalance with dissipation monitoring (QCM-D), surface plasmon resonance (SPR), and atomic force microscopy (AFM). Isotherms of the adsorption reveal that 3.3 fold more AGPs from A. seyal (500 ppm) are needed to cover the gold surface compared to A. senegal (150 ppm). The pH and salt concentration of the environment greatly affected the adsorption behavior of both gums, with the surface density ranging from 0.92 to 3.83 mg m−2 using SPR (i.e., “dry” mass) and from 1.16 to 19.07 mg m−2 using QCM-D (wet mass). Surprisingly, the mass adsorbed was the highest in conditions of strong electrostatic repulsions between the gold substrate and AGPs, i.e., pH 7.0, highlighting the contribution of other interactions involved in the adsorption process. Structural changes of AGPs induced by pH would result in swelling of the polysaccharide blocks and conformational changes of the polypeptide backbone, therefore increasing the protein accessibility and hydrophobic interactions and/or hydrogen bonds with the gold substrate.