In this paper, a neuroadaptive distributed output feedback formation tracking control scheme for multiple marine surface vessels with model uncertainties, unknown environmental disturbances and input and output constraints is proposed. A neural network based observer is developed to reconstruct the unmeasured velocity and approach the model uncertainties. To handle the input constraint, an auxiliary dynamic system is introduced. The tracking error transformation and the barrier Lyapunov function are used to tackle with the output constraint. Subsequently, by using the estimated velocity of neighboring vessels, neuroadaptive distributed output feedback controllers are developed. Furthermore, to avoid directly taking the time derivation of virtual control law and generate smooth reference signals, linear tracking differentiators are employed. Finally, it is shown that all the signals in the closed-loop system are bounded via Lyapunov analysis. Simulations are carried out to verify the proposed control scheme.
This paper investigates the formation tracking control problem of a group of underactuated surface vessels (USVs) in the presence of model uncertainties and environmental disturbances. Additional constraints, such as collision avoidance, heterogeneous limited communication range and input saturation are also considered. A modified barrier Lyapunov function (BLF) is introduced to achieve the connectivity preservation, the collision avoidance and the distributed formation tracking. Extended state observer (ESO) is employed to estimate total disturbances consisting of environmental disturbances and model uncertainties. Auxiliary variables are introduced to deal with the underactuated problem and input saturation. A distributed controller is developed for each USV. Using the Lyapunov method analyze the stability of the system, it is proven that all signals are bounded and tracking errors converge to a neighborhood of the origin. Simulation results show that the proposed controller is practicable and effective.
1 January 2019 in Mathematical Problems in Engineering
This paper presents a backstepping controller using barrier Lyapunov function (BLF) for dynamic positioning (DP) system. For safety reasons, the position and heading of DP ship are to be maintained in certain range. Thus, in this paper, a control law based on BLF and backstepping technique is proposed to limit the position and heading. The closed‐loop system is proved stable in the sense of Lyapunov stability theories. In addition, since the velocities of ship are not measurable and the wave frequency (WF) motion is unavailable, a passive observer is adopted to estimate the velocities and the effect of WF motion. The simulation results show that the proposed controller can limit the position and heading of the vessel in a predefined range and verify the performance of the proposed controller and the passive observer.
This paper proposes an output feedback cooperative dynamic positioning control scheme for an unactuated floating object using multiple vessels under model uncertainties and environmental disturbances. The floating object is connected to multiple vessels through towlines. At first, nonlinear extended state observers are developed for the floating object and vessels to reconstruct the unmeasured velocity and to estimate the model uncertainties and disturbances. Second, observer-based controllers are designed for the floating object and vessels to drive the floating object to track the reference signal and to achieve the cooperative control of multiple vessels, respectively. The salient features of the proposed control scheme are presented as follows. Firstly, by design the object controller, the tracking performance of the object is improved. Secondly, according to the required force of the floating object, the time-varying formation of vessels is obtained by using the towline attachment geometry of the floating object, control allocation and a towline model. It is shown that all signals in closed-loop system are bounded via Lyapunov analysis. Simulation study is carried out to verify the effectiveness of proposed control method.