Getting closure in ferroelectric films: Ferroelectric materials have a spontaneous electric polarization that can be manipulated for applications. The polarization is usually not uniform throughout the material, and for nanosized ferroelectrics, polarization can be quite complex. Using scanning transmission electron microscopy, Tang et al. found that in thin films of the ferroelectric PbTiO ₃ , the polarization vector rotated in space, forming a closed loop, the so-called flux closure. The flux closure structures formed an array, with the period dependent on the width of the thin film, and caused the buildup of considerable strain within the crystal lattice of the material Science, this issue p. 547

Nanometer-thick passive films on metals usually impart remarkable resistance to general corrosion but are susceptible to localized attack in certain aggressive media, leading to material failure with pronounced adverse economic and safety consequences. Over the past decades, several classic theories have been proposed and accepted, based on hypotheses and theoretical models, and oftentimes, not sufficiently nor directly corroborated by experimental evidence. Here we show experimental results on the structure of the passive film formed on a FeCr₁₅Ni₁₅ single crystal in chloride-free and chloride-containing media. We use aberration-corrected transmission electron microscopy to directly capture the chloride ion accumulation at the metal/film interface, lattice expansion on the metal side, undulations at the interface, and structural inhomogeneity on the film side, most of which had previously been rejected by existing models. This work unmasks, at the atomic scale, the mechanism of chloride-induced passivity breakdown that is known to occur in various metallic materials.

Nanometer-thick passive films, which impart superior corrosion resistance to metals, are degraded in long-term service; they are also susceptible to chloride-induced localized attack. Here we show, by engineering crystallographic configurations upon metal matrices adjacent to their passive films, we obtain great enhancement of corrosion resistance of FeCr15Ni15 single crystal in sulphuric acid, with activation time up to two orders of magnitude longer than that of the non-engineered counterparts. Meanwhile, engineering crystallography decreases the passive current density and shifts the pitting potential to noble values. Applying anodic polarizations under a transpassivation potential, we make the metal matrices underneath the transpassive films highly uneven with {111}-terminated configurations, which is responsible for the enhancement of corrosion resistance. The transpassivation strategy also works in the commercial stainless steels where both grain interior and grain boundaries are rebuilt into the low-energy configurations. Our results demonstrate a technological implication in the pretreatment process of anti-corrosion engineering.