In this paper, comprehensive remarks are given that focus on the main fabrications and wide applications of helical long-period fiber gratings (HLPGs). Firstly, the techniques of fabricating HLPGs by CO2 laser, hydrogen–oxygen flame heating, and arc discharge are summarized. Furthermore, the applications of HLPGs are investigated, i.e., orbital angular momentum (OAM) mode converters, all-fiber band-rejection filters, and sensors for measuring physical perturbation of torsion, strain, temperature, curvature, and surrounding refractive index (SRI). Furthermore, several long-period fiber gratings (LPFGs) of near-HLPG structures with periodic refractive index change along the azimuthal direction are introduced. Lastly, the prospects and key challenges for HLPGs are discussed.
We proposed a high-sensitivity optical fiber sensor based on a dual-resonance helical long-period fiber grating (HLPG). The grating is fabricated in a single-mode fiber (SMF) by using an improved arc-discharge heating system. The transmission spectra and the dual-resonance characteristics of the SMF-HLPG near the dispersion turning point (DTP) were studied through simulation. In the experiment, a four-electrode arc-discharge heating system was developed. The system can keep the surface temperature of optical fiber relatively constant during the grating preparation process, which shows an advantage in preparing high-quality triple- and single-helix HLPGs. In particular, benefiting from this manufacturing system, the SMF-HLPG operating near the DTP was successfully prepared directly by arc-discharge technology, without secondary processing of the grating. As a typical application example of the proposed SMF-HLPG, physical parameters such as temperature, torsion, curvature and strain can be measured with high sensitivity by monitoring the variation of the wavelength separation in the transmission spectrum. Therefore, the proposed sensor and its fabrication technology have potential application prospects in practical sensing measurement.
17 January 2024 in Journal of Lightwave Technology
A high-purity and super-stable vortex beam generator with a large mode field diameter based on chiral fiber gratings is proposed and fabricated. The double-clad fiber (DCF) is twisted with arc-discharge heating, and its core mode is completely converted to the inner cladding OAM 1,1 mode which only contains a single orbital angular momentum (OAM). To optimize the design of DCF, the equivalent mode field diameter (EMD) and optimal coupling length (OCL) of DCF with different refractive index profiles are solved by using the fiber mode analysis method. A homemade arc discharge heating fiber twisting device was used to fabricate twisted DCF. Experimental results demonstrate an EMD of 44 μm and a conversion efficiency of up to 99.5% for the generated OAM 1,1 vortex beam, which is independent of the ambient refractive index and input polarization state. The twisted DCF has the characteristics of high conversion efficiency, no adjustment, and compact structure, and can be used for STED microscopic imaging and optical manipulation in complex liquid environments.
This article developed a micromachining system of arcing helical fiber with four electrodes to address the issues with conventional approaches to processing helical fibers, which have several uses. The technique may be utilized to create several types of helical fibers. First, the simulation demonstrates that the four-electrode arc’s constant-temperature heating area is larger than the two-electrode arc’s size. A large constant-temperature heating area is not only beneficial to the stress release of fiber, but also reduces the influence of fiber vibration and reduces the difficulty of device debugging. Then, a variety of helical fibers with various pitches were processed using the system presented in this research. By using a microscope, it can be observed that the cladding and core edges of the helical fiber are constantly smooth and the central core is tiny and off-axis, both of which are favorable for the propagation of optical waveguides. A low off-axis has been shown to minimize optical loss through modeling of energy coupling in spiral multi-core optical fibers. The transmission spectrum findings indicated that the device’s insertion loss and transmission spectrum fluctuation were both minimal for four different types of multi-core spiral long-period fiber gratings with intermediate cores. These prove that the spiral fibers prepared by this system have excellent quality.
1 November 2022 in Journal of Lightwave Technology
The purpose of this note is to point out the mistake in the above article. The affiliation of the author was modified. This correction was consistent with the original version of the article, and had no influence on the results in the paper.