Rotary-wing aerial vehicles offer manoeuvrability and vertical take-off and landing (VTOL) advantages over fixed-wing systems. Rotary-wing systems do however have comparatively higher energy demands and consequently shorter flight times and therefore a greater energy dependence over their fixed-wing counterparts. Advances in photovoltaic technologies have resulted in significant increases in the specific power (power-to-weight-ratio) of solar cells enabling the design of solar-powered rotary-wing aircraft, and now micro-sized variants. The micro aerial vehicle (MAV) presented, the Micro Solarcopter, is a 0.15 m $$\times$$ 0.15 m $$\times$$ 0.02 m solar-rechargeable radio-controlled aircraft. The 0.071 kg aircraft can fly for an average time of 3.5 min, recharge in approximately 68 min under 1000 W/m2 irradiance at 25 °C and can hibernate for 38 days without sunlight. The paper explores the use of commercially available photovoltaic cells for the purpose of increasing the energy autonomy of multi-rotor MAVs, by enabling them to stay out in the field without returning to base for charging. A working prototype has been presented which incorporates a battery management system, automatic power on and off, low-power sleep mode, and first-person-view (FPV) camera.
Hexacopters are a kind of unmanned aerial vehicle (UAV) with six actuators and six degrees-of-freedom motions. The control of a hexacopter drone is a critical challenge. This paper presents a nonlinear dynamical model for a hexacopter and complete control approaches based on sliding mode control theory. Furthermore, this study proposed an effective control tuning method based on an optimisation algorithm. The controller has been improved by the grey wolf optimisation (GWO) algorithm, an iteration algorithm inspired by the social hierarchy and hunting behaviour of grey wolves. The improvement of the controller has been verified both experimentally and in simulations. The performance of the sub-controller for an attitude angle was tested in a test bench, and the whole flight controller was tested in simulation hexacopters, which are highly manoeuvrable, nonlinear aerial vehicles with six independent rotors and capacity for vertical take-off and landing. This article presents a derivation of the nonlinear dynamical model for a hexacopter, which includes the aerodynamic drag, and inertia counter torques. Flight control based on sliding mode control theory, which generally shows good performance on nonlinear systems, is developed and implemented. Given the need to simultaneously tune controller parameters, two nature inspired optimisation routines (GWO and PSO) are applied and compared for effectiveness in controller tuning. Results indicate that GWO-based tuning produces superior outcomes in terms of controller performance. This is in addition to the fact that PSO parameters require tuning rather than random selection of algorithm parameters. A reduced-order physical prototype is presented for the validation of the tuning routine on the roll/pitch control. The results indicate good agreement between simulation and experimental outcomes, with about 10.4% improvement in the tracking performance of roll DOF when GWO is applied to tune the controller.
9 March 2026 in IEEE Aerospace and Electronic Systems Magazine
This paper is focused on improving the flight endurance of a multirotor unmanned aerial vehicle (UAV) by utilizing a solar-battery hybrid energy system. This arrangement imparts energy autonomy to the system and in this study, an increase in endurance is achieved in real-world conditions. To achieve this result, an integrated design framework is introduced with the aim of sequencing the subsystem design with consideration for the interplay between the subsystems such that predefined performance specifications can be attained. This systematic approach was implemented in this study to realize a prototype solar-powered quadrotor which was subsequently tested outdoors successfully. The significant increase in the flight endurance of the multirotor solar-powered UAV achieved in this article, presents an opportunity for increased scope for commercial and industrial applications.