Viktor Voroshchuk

Mr. Viktor Voroshchuk

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 July 2021 in Materials
Verified
Journal Article
Open access
PDF file
Paweł DroździelPaweł Droździel
Paweł Droździel
TVTetiana Vitenko
Tetiana Vitenko
VVViktor Voroshchuk
Viktor Voroshchuk
SNSergiy Narizhnyy
Sergiy Narizhnyy
OSOlha Snizhko
Olha Snizhko
The efficient use of supplied energy is the basis of the discrete-impulse energy supply (DIES) concept. In order to explore the possibility of using DIES to intensify the hydromechanical processes, the emulsification of milk fat (homogenization of milk, preparation of spreads) and, in particular, the processing of cream cheese masses, were studied. Whole non-homogenized milk, fat emulsions, and cream cheese mass were the object of investigation. To evaluate the efficiency of milk homogenization, the homogenization coefficient change was studied, which was determined by using the centrifugation method, as it is the most affordable and accurate one. To provide the proper dispersion of the milk emulsion, six treatment cycles must be carried out under the developed cavitation mode in a static-type apparatus, here resulting in a light grain-like consistency, and exhibiting the smell of pasteurized milk. The emulsions were evaluated according to the degree of destabilization, resistance and dispersion of the fat phase. On the basis of the obtained data with respect to the regularities of fat dispersion forming in the rotor-type apparatus, the proper parameters required to obtain technologically stable fat emulsion spreads, possessing a dispersion and stability similar to those of plain milk creams, were determined. It was determined that under the DIES, an active dynamic effect on the milk globules takes place. The rheological characteristics of cheese masses were evaluated on the basis of the effective change in viscosity. The effect of the mechanical treatment on the structure of the cheese masses was determined.

11 March 2021 in Preprints.org
Verified
Preprint
Open access
PDF file
Paweł DroździelPaweł Droździel
Paweł Droździel
TVTetiana Vitenko
Tetiana Vitenko
VVViktor Voroshchuk
Viktor Voroshchuk
SNSergiy Narizhnyy
Sergiy Narizhnyy
OSOlha Snizhko
Olha Snizhko
The basis of the discrete-impulse energy supply (DIES) concept is the efficient use of supplied energy. The references describe in detail the general principles of DIES, examine the energy and thermodynamic aspects and the main mechanisms of intensification that can be initiated on the basis of this principle. DIES mechanisms conveniently can be divided into hard and soft ones. The former should be used to stimulate hydromechanical processes, and the latter to accelerate the processes of phase heat and mass transfer, or for the purpose of intensive mixing of multicomponent media. The authors have studied the possibility of using DIES to intensify the hydromechanical processes, in particular emulsification of milk fat (homogenization of milk, preparation of spreads), processing of cream cheese masses. Objects of research were whole non-homogenized milk, fat emulsions, cream cheese mass. In order to evaluate the efficiency of milk homogenization the homogenization coefficient change was studied, which was determined by centrifugation method as the most affordable and accurate one. Emulsions were evaluated according to the degree of destabilization, resistance and dispersion of the fat phase. The rheological characteristics of cheese masses were evaluated by the effective viscosity change.

25 July 2022 in Journal of Chemistry and Technologies
Verified
Journal Article
Open access
PDF file
ІРІрина О. Романчук
Ірина О. Романчук
TRTetyana V. Rudakova
Tetyana V. Rudakova
АМАнтоніна В. Мінорова
Антоніна В. Мінорова
LMLiudmyla O. Moiseeva
Liudmyla O. Moiseeva
НКНаталія Л. Крушельницька
Наталія Л. Крушельницька
VVViktor Voroshchuk
Viktor Voroshchuk
Determination of carbohydrate content in food products, in particular dairy products, is necessary to solve various applications, including quality control. There are currently no techniques or methods for determining fructose in dairy products with a combined carbohydrate composition, including for baby food. Given the multicomponent composition of dairy products for baby food, there is a need to separate carbohydrates, in particular fructose, from the components included in the matrices of the analyzed sample and create certain difficulties for its quantification. The aim was to apply innovative approaches to develop a method of extraction and use of the resorcinol method for the determination of fructose in dairy products with a combined carbohydrate composition, including for baby food. The founded that according to the absorption spectra of the filtrate reaction products obtained by various methods, the maximum absorption in the visible region of the spectrum is  λmax = 415-420 nm. It was found that the value of the mass fraction of fructose in the filtrates obtained by precipitation of the product solutions for the polarimetric method with the destruction of lactose, correlate with each other, namely, the value of the absolute error of the compared results is 0.02 and 0.03%, and the relative error is 0.6-0.73%. An innovative method for extracting fructose in dairy products with a combined carbohydrate composition, including for baby food, to determine its resorcinol method, proved the accuracy of the method and the reliability of the results in the filtrates obtained by precipitation of the product solutions for polarimetric method with lactose destruction.

30 April 2026 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
IRIryna Romanchuk
Iryna Romanchuk
TRTetiana Rudakova
Tetiana Rudakova
AMAntonina Minorova
Antonina Minorova
VVViktor Voroshchuk
Viktor Voroshchuk
SNSergiy Narizhnyy
Sergiy Narizhnyy
LZLiudmyla Zahorui
Liudmyla Zahorui
This study investigates structured low-calorie dairy desserts with multicomponent stabilization systems, including protein and carbohydrate components. The issue of the ratio of stabilization systems' components and their influence on the structural-mechanical and organoleptic characteristics of the product remains insufficiently studied. The lack of substantiated mathematical models complicates the targeted design of recipes with predefined properties. Mathematical models of the dependence of viscosity on the ratio of components in the stabilization system have been constructed. For puddings with the "gelatin-starch-rice flour" system, the effective viscosity based on buttermilk was 12717–14381 mPa·s, based on retentate – 18220–25864 mPa·s. For creams with the "pectin-inulin-whey" system – 3640–5063 mPa·s and 4097–5836 mPa·s, respectively. Organoleptic and physicochemical indicators confirmed that the optimized stabilization systems provide a stable structure of desserts with proper organoleptic characteristics and high moisture retention capacity. It was established that the interaction of protein molecules with polysaccharide chains during thermomechanical processing leads to the formation of a stable gel structure and an increase in water-binding capacity. Taking these interactions into account in mathematical models has made it possible to determine the optimal composition of stabilization systems. The effectiveness of combining rice flour, starch, and gelatin for structuring pudding; inulin, pectin, and demineralized whey for cream was confirmed by mathematical modeling. The results could be used by dairy processing enterprises when devising low-calorie products with a predefined structure.

29 September 2017 in EUREKA: Life Sciences
Verified
Journal Article
Open access
PDF file
SMSergey Merzlov
Sergey Merzlov
NLNeonila Lomova
Neonila Lomova
SNSerhiy Narizhniy
Serhiy Narizhniy
OSOlha Snizhko
Olha Snizhko
VVViktor Voroshchuk
Viktor Voroshchuk
The quality of modern food products may be improved by adding bee pollen (PB) to the composition. The important stage of the process of improvement of an existent product or creation of new one is the optimization of the technology of bee pollen preparation, especially, comminution. The aim of the researches was to investigate the process of comminution and to optimize technological parameters for receiving high quality powder, used as a component of sour-milk beverages and other products. The study elucidates the influence of a series of factors on the size of particles and quality of bee pollen powder by technological and phytochemical properties. Using the visual method with modern optimal devices, it was established, that pollen can be comminuted to the particles size 120–8 mcm. The dispersity degree of received powder caused changes of the phytochemical activity and technological parameters of a product. The method of colorimetry determined that the content of flavonoids in pollen increases by 53 % at communiting to particle sizes 15±5 mcm and decreases at the higher dispersity. The screen method determined the homogeneity of the material, processed by three types of comminutors and substantiated the use of a mill-pestle in the technology of bee pollen comminution as the most effective comminutor. Using the plan of the complete factor experiment of the third kind, there were studied the surfaces of a response of the dependence of pollen powder homogeneity on the comminutor work intensity, mass and term of the material processing. Technological parameters of pollen comminution by a mill-pestle were optimized: working body speed 70–80 turn/min (min−1), processing duration – 6 min, batch mass – 150 g.

27 November 2024 in Herald of Khmelnytskyi National University. Technical sciences
Verified
Journal Article
Open access
PDF file
МГМихайло Гудь
Михайло Гудь
VVViktor Voroshchuk
Viktor Voroshchuk
ВОВасиль Олексюк
Василь Олексюк
АГАндрій Гагалюк
Андрій Гагалюк
У статті досліджується вплив фізико-механічних – параметрів наповнювача на частоти власних коливань заповненої підсиленої циліндричної оболонки. Оболонкові конструкції мають знайшли широке застосування в багатьох галузях економіки. Такі конструкції широко застосовуються як ракетобудівній галузі так і в сільському господарстві.. Одним із важливих чинників який визначає напружений стан оболонкової конструкції є явище резонансу, зокрема наповнених оболонок. Наповнювачем в даному випадку може виступати які і рідина так і інші речовини з різноманітними фізико-механічними характеристиками. У випадку, якщо частоти власних коливань заповненої оболонки співпадають із коливаннями інших елементів або механізмів, відбувається накладання частот і водночас різке збільшення рівня напружень, що може призвести до виникнення аварійної ситуації. Тому важливим завданням постає коректне визначення частот власних коливань заповненої оболонки в залежності від густини заповнювача та модуля пружності.